« previous next »
Pages: [1]   Go Down

Author Topic: What´s the size of the LB and RB button  (Read 2289 times)

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
What´s the size of the LB and RB button
« on: August 10, 2012, 01:43:34 AM »
Hi guys

I have some faulty controllers of Xbox 360 with LB or RB button and I want to replace them. I have searched on ebay but I have found different sizes. For example:

http://www.ebay.es/itm/280925410446?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.es/itm/360476012500?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Do you know the correct size?

Thanks in advance
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: What´s the size of the LB and RB button
« Reply #1 on: August 10, 2012, 01:40:13 PM »
The Stem height you're looking for is ~3.85mm, those are too big.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: What´s the size of the LB and RB button
« Reply #2 on: August 11, 2012, 03:21:47 AM »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: What´s the size of the LB and RB button
« Reply #3 on: August 11, 2012, 01:38:13 PM »
Technically you can, though you'll probably need to sand or Dremel down the plastic posts on the actual LB/RB buttons a bit if you use 4.3mm ones.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: What´s the size of the LB and RB button
« Reply #4 on: August 13, 2012, 02:08:12 AM »
Thanks RDC!! Firt i will try to find the correct size, if I can’t I will buy the others
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: What´s the size of the LB and RB button
« Reply #5 on: September 12, 2012, 05:48:57 AM »
RDC, I have bought 4.3mm and 5mm buttons and they are smaller than the original button. The 5mm button is close to the original. Maybe 5.5mm would be fine?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: What´s the size of the LB and RB button
« Reply #6 on: September 12, 2012, 07:25:15 AM »
5.5mm should work fine if they're measuring the stem height from the back of the switch, which is wrong, but it's what it looks like they're doing there if the 5mm is a tad too short.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal