Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Hi to all im having an issue after xbox trini RGH2 freezes about a minute after it glitch any suggestion why? I'm using CR rev c default settings 2-3 has resistor and jp.
Is it a falcon motherboard?
ohh I didn´t see it is a trinity board. I know falcon RGH2 have problems with freezes
Ok I removed the Jp resistor still freezes so should I cut the blue wire shorter? It doesn't freeze so quickly as before when I'm on the dashboard just when I'm about to play a game.
could be just over heating , first thing i would try is taking off the x-clamp and reapply some new artic silver 5 paste and try bolting down the heat sync like you would a normal rrod fix. using steel and nylon washers the spacing has to be right so that you do not flex the board and should be bolted thru the cage simple easy fix i would try before reflowing or reballing the console
what size washer and bold should i get seem the rrod fixwill do the trick because the heat sync was not seated properly, i press down on all four side and test and it didnt freeze.