Author Topic: damaged jdm 030  (Read 1655 times)

Offline Mason2012

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
damaged jdm 030
« on: August 01, 2018, 10:23:46 PM »
 :dntknw: hello. when i trying do scuf mod i damaged contact. So... [] , O work well. and /\ work on 90%, but X not working.
How i can repair that?
Second problem, when i remove left 3d analog i probably broken many VIA. How repair traces for left stick?
probably i dont repair that board... but may be









Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: damaged jdm 030
« Reply #1 on: August 03, 2018, 02:14:13 PM »
I'd turn that one into a parts controller.

That X via is completely gone, and if the left Stick is also torn up, you will put far more work and time into that thing than a new one is worth.

If you do get a new one, look into doing or getting something like the SFX for the controller so you don't have to solder to it at all.

JDM-030 - https://www.acidmods.com/forum/index.php/topic,43753.0.html

JDM-040/-050/-055 - https://www.acidmods.com/forum/index.php/topic,44001.0.html
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Mason2012

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: damaged jdm 030
« Reply #2 on: August 08, 2018, 02:02:54 AM »
i knew it. damn... thank for reply

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal