« previous next »
Pages: [1]   Go Down

Author Topic: 1537 c33 capacitor blown  (Read 1587 times)

Offline Nick_Sparkle

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
1537 c33 capacitor blown
« on: December 18, 2020, 08:24:35 AM »
I?ve had two 1537 now with no power, removed c33 as it had blown, and they power on. Do I need to replace this capacitor and if so what size is it? Thank you as always for your advice in advance .
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1537 c33 capacitor blown
« Reply #1 on: December 18, 2020, 09:06:24 AM »
You can toss a 100uF 1206 in there.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Nick_Sparkle

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1537 c33 capacitor blown
« Reply #2 on: December 18, 2020, 10:25:00 AM »
Thank you once again RDC
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1537 c33 capacitor blown
« Reply #3 on: December 18, 2020, 08:50:37 PM »
Welcome.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Nick_Sparkle

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1537 c33 capacitor blown
« Reply #4 on: December 22, 2020, 07:39:54 AM »
Is the voltage relevant ? Ive ordered some but they say 1206 100uf 50v? Will these be ok ?
« Last Edit: December 22, 2020, 08:19:09 AM by Nick_Sparkle »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1537 c33 capacitor blown
« Reply #5 on: December 22, 2020, 10:19:01 AM »
It's just a decoupling cap on the 3.3v rail, so anything rated 6.3v or more will be perfectly fine. The schematic of that controller is on the forums here.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal