« previous next »
Pages: [1]   Go Down

Author Topic: JDM-001 not charging  (Read 1950 times)

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
JDM-001 not charging
« on: April 16, 2021, 11:42:26 AM »
I have a JDM-001 controller connected to the charger since the phone charged 2 hours and stopped. Now it doesn't load anymore.
I checked on another JDS-001 and on a different battery (100% working) and not charging, someone will tell you what could be damaged?
Logged

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
Re: JDM-001 not charging
« Reply #1 on: April 17, 2021, 03:01:39 AM »
battery charge only via usb ps4

I measured no charging. Only orange light
« Last Edit: April 18, 2021, 05:03:51 AM by lysy112 »
Logged

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
Re: JDM-001 not charging
« Reply #2 on: April 18, 2021, 05:09:26 AM »
I measured the fuses.
Maybe someone will give some tips?

« Last Edit: April 18, 2021, 05:09:56 AM by lysy112 »
Logged

Offline maki

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-001 not charging
« Reply #3 on: April 19, 2021, 03:58:26 AM »
Not sure if this is of help, the 5 legged components on the left hand side are voltage regulators, 3.2V

So measuring 3.2V means they are working.


https://acidmods.com/forum/index.php/topic,44761.msg336412.html#msg336412

the 6 legged components next to the regulators could be MOSFETs, need to check mine


the components market with 0 are zero ohm resistors or fuses, they should have continuity


I have a bunch of broken JDM-001 here, so I'm very interested in your findings

Edit:
the six legged components are market as KPH, those are are MOSFET, SSM6J412TU
https://alltransistors.com/adv/pdfview.php?doc=ssm6j412tu.pdf&dire=_toshiba
« Last Edit: April 19, 2021, 04:30:26 AM by maki »
Logged

Offline maki

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-001 not charging
« Reply #4 on: April 20, 2021, 12:58:57 AM »
Just FYI, most of my JDM-001 have a broken PMIC (BD92001), seems to be a common thing over all JDM variants.

Bought some from here
https://de.aliexpress.com/item/32877818190.html?spm=a2g0o.cart.0.0.777d3c00ajLy8o&mp=1

Luckily the PMIC for the JDM-001 are relatively cheap.

There is some test points around that PMIC, what values do you read form there?
Logged

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
Re: JDM-001 not charging
« Reply #5 on: April 20, 2021, 06:06:19 AM »
I'll check tommorow.
Logged

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
Re: JDM-001 not charging
« Reply #6 on: April 22, 2021, 07:18:10 AM »


i have this
Logged

Offline maki

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM-001 not charging
« Reply #7 on: April 23, 2021, 04:40:58 AM »
I'll get back the values for you once i have another JDM-001 open (currently busy with 055), but IIRC that 0.4 V should be Battery Voltage +0.2V (charging), assuming a battery is plugged in.
Logged

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
Re: JDM-001 not charging
« Reply #8 on: April 24, 2021, 02:27:38 AM »
Measurement without batteries
Logged

Offline lysy112

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +0/-0
  • Acidmods User
Re: JDM-001 not charging
« Reply #9 on: April 28, 2021, 02:32:40 AM »
Someone will tell you what could be the reason?
How to check if BD92001 is damaged?

Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal