« previous next »
Pages: [1]   Go Down

Author Topic: Xbox one elite controller joystick modual analog repair  (Read 2485 times)

Offline Adampark

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Xbox one elite controller joystick modual analog repair
« on: September 12, 2018, 04:33:18 AM »
Hi, a friend told me too post on here and  see if anyone can help me, I have just done a repair on my Xbox one elite controller and I have pulled one of the pads off underneath where the modual sits on and it no longer runs when presses in? Everything else works fine just won’t work when pressed in Could some one give me a litte help ? Or push me in the right direction I don’t mind paying for someone’s time just dont have the funds for a new controller!  :beg: :beg: :beg:

Kind Regards
Adam
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Xbox one elite controller joystick modual analog repair
« Reply #1 on: September 12, 2018, 01:37:09 PM »
A good pic or two of the damaged area would be the most useful to help us help you out there. Also which controller is this? The sticker in the battery compartment will have the Model number, 1537, 1697, 1698 or 1708
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Adampark

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox one elite controller joystick modual analog repair
« Reply #2 on: September 13, 2018, 04:38:44 PM »
Thanks for the reply i really appreciate it! The model is 1698, the pad on the back is removed and copper throughhole pot  it won’t run anymore (L3)   Looking forward to your reply Thanks for your help












Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Xbox one elite controller joystick modual analog repair
« Reply #3 on: September 13, 2018, 07:18:58 PM »
Solder a jumper wire from TP106 to the marked LSC (L3) lead.

Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Adampark

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox one elite controller joystick modual analog repair
« Reply #4 on: September 14, 2018, 05:45:14 AM »
Well what can I say??? Your a genius!!! Thank you so much could you please send me your PayPal email I will drop you a donation! Have a drink on me!  Keep up your good work  :#1: :#1:
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Xbox one elite controller joystick modual analog repair
« Reply #5 on: September 14, 2018, 12:19:34 PM »
Welcome. You can hit the Donate link on the home page and just give it to the site.

https://www.acidmods.com/forum/index.php
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Adampark

  • Chief squatting Hard
  • *
  • Posts: 22
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox one elite controller joystick modual analog repair
« Reply #6 on: September 16, 2018, 10:07:47 AM »
I have just sent a donation! Thanks again for your help :)  :hifive:
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Xbox one elite controller joystick modual analog repair
« Reply #7 on: September 16, 2018, 12:33:06 PM »
Welcome, and Thanks.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline xS7EzRippin

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Xbox one elite controller joystick modual analog repair
« Reply #8 on: February 24, 2024, 09:04:31 PM »
Hey, sorry to jump in on this, wondering if there are any test points or jumper points to the left analogue potentiometer pads, I know the ground pads but the other 2 for both potentiometers would be great as I have no pads for them. Thanks in advance
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal