Author Topic: L0rdNiC0s tutorial for the Sound Reactive LED Mod for the Slim (Read 148492 times)

bustinthejustin · « **Reply #90 on:** January 25, 2009, 05:08:41 PM »

uh I don't think it matters, just one is more expensive and

It's not really important to have different color kynar (I just used one color) but it just makes it easier for you to identify positive and negative.

wowzerz89 · « **Reply #91 on:** February 22, 2009, 04:11:06 PM »

am i doing something wrong??

this is what i got.......

antonmods · « **Reply #92 on:** February 26, 2009, 07:48:00 PM »

how about for mypspphat 1000????? i want also install a sound on it!!!

EliteGamer83 · « **Reply #93 on:** February 28, 2009, 09:12:04 PM »

Your link to the sound mod in the very beginning doesn't work. :\

EliteGamer83 · « **Reply #94 on:** March 02, 2009, 06:52:56 AM »

A few questions cause your links are broken. What exactly do I NEED in this part?

I don't know how to do that.

Also what type of resistors do I need (how many ohms) and lastly, how you did your sound mod? the way Jumbo said to do it was just wire the + and - of the each LED for L and R was just solder the LEDs directly to the contact points of the speakers and that's it. Is that how you did your sound mod? since the links no longer work I'm really confused. Please help!!

DarkShot · « **Reply #95 on:** March 02, 2009, 08:15:43 PM »

Really?

Come on, he says the value of the resistors.

Quote

1x 191k-ohm Resistor
1x 30k-ohm Resistor

Jumbo was talking about direct contact leds.

This way uses the IC.

And there are many diagrams drawn in this thread, such as the one by Wowzerz:

Quote from: wowzerz89 on February 22, 2009, 04:11:06 PM

am i doing something wrong??

this is what i got.......

Dude, take the time to read, do some through searching, and Then ask questions.

btw wowzerz it looks fine to me.

EliteGamer83 · « **Reply #96 on:** March 03, 2009, 05:39:49 AM »

Quote from: DarkShot on March 02, 2009, 08:15:43 PM

Really?

Come on, he says the value of the resistors.

Jumbo was talking about direct contact leds.

This way uses the IC.

And there are many diagrams drawn in this thread, such as the one by Wowzerz:

Dude, take the time to read, do some through searching, and Then ask questions.

btw wowzerz it looks fine to me.

so you only need it hook it up to 1 speaker for both L and R? also are the contacts on the IC labeled? (don't have it yet) cause it's really REALLY small..

and lastly can I hook up multiple LEDs to L and R? like 2 LEDs on L and 2 LEDs on R?

DarkShot · « **Reply #97 on:** March 03, 2009, 01:46:30 PM »

Yes.

If you wanted to hook up more than one led yes, but depending on what is wanted, there may be more.

As for the contacts, pin one will be labeled by a dot.

If you know where pin one is, you know where the others are:

[ghettopic]

8 7 6 5
|__|__|__|
| |
| LM386 |
|O_______|
| | | |
1 2 3 4

[/ghettopic]

EliteGamer83 · « **Reply #98 on:** March 03, 2009, 01:58:44 PM »

Quote from: DarkShot on March 03, 2009, 01:46:30 PM

Yes.

If you wanted to hook up more than one led yes, but depending on what is wanted, there may be more.

As for the contacts, pin one will be labeled by a dot.

If you know where pin one is, you know where the others are:

[ghettopic]

   8   7   6   5
   |__|__|__|
   |    |
   | LM386   |
   |O_______|
|   |   |   |
1   2   3   4

[/ghettopic]

ok, so I can have 2 sound LEDs in the triggers and 2 LEDs in the UMD door? do I solder 2 wires directly to each contact?

DarkShot · « **Reply #99 on:** March 03, 2009, 02:06:42 PM »

Yes to the First.

Yes to the second as well, but you can solder 1 wire to each contact (I'm assuming you mean the pins) and then connect as many wires as you want to those wires. Allows for a much cleaner mod.

EliteGamer83 · « **Reply #100 on:** March 03, 2009, 02:49:54 PM »

Quote from: DarkShot on March 03, 2009, 02:06:42 PM

Yes to the First.

Yes to the second as well, but you can solder 1 wire to each contact (I'm assuming you mean the pins) and then connect as many wires as you want to those wires. Allows for a much cleaner mod.

so it would look like this? Oh BTW is my wiring correct? I wired them in parallel did I or didn't I? I'm not sure lol but I think I did.

DarkShot · « **Reply #101 on:** March 03, 2009, 07:28:46 PM »

Looks right to me.

EliteGamer83 · « **Reply #102 on:** March 03, 2009, 07:49:25 PM »

Quote from: DarkShot on March 03, 2009, 07:28:46 PM

Looks right to me.

So I did something right?

They are wired in parallel right? cause I don't want everything to die if 1 goes out. Oh and why is the start at the + mint colored then changes to dark red?

And the neon green goes to... what resistor? there are like 10 resistors on the PSP circuit boards.

bustinthejustin · « **Reply #103 on:** March 03, 2009, 08:18:47 PM »

Erm if you read the tutorial, you would know. Figure that one out yourself.

EliteGamer83 · « **Reply #104 on:** March 03, 2009, 08:26:16 PM »

ok ok.. sorry I read it the first time, but I didn't memorize it. Just trying to get all the info I can before I start, jeez.

Is this mod going to be VERY reactive? or only semi-reactive?

bustinthejustin · « **Reply #105 on:** March 03, 2009, 09:02:43 PM »

Well sorry, but it starts getting annoying when one has to state the same information twice. But no this won't be very reactive, only semi. I suggest transistor method or direct connect.

EliteGamer83 · « **Reply #106 on:** March 04, 2009, 06:03:46 AM »

Quote from: bustinthejustin on March 03, 2009, 09:02:43 PM

Well sorry, but it starts getting annoying when one has to state the same information twice. But no this won't be very reactive, only semi. I suggest transistor method or direct connect.

Ok, do you have a tut to the "tranistor one"? cause I have no idea what that is. Second, by Direct Contact you mean from the speaker contact points + and - to the LEDs? but can I turn them on and off still? is there a way to have active LEDs that you can turn on and off?

DarkShot · « **Reply #107 on:** March 04, 2009, 03:46:52 PM »

Damn it just use the SEARCH

EliteGamer83 · « **Reply #108 on:** March 04, 2009, 05:52:25 PM »

Quote from: DarkShot on March 04, 2009, 03:46:52 PM

Damn it just use the SEARCH

Alot of people here hate me eh? it happens..

And by Direct Contact you mean from the speaker contact points + and - to the LEDs? but can I turn them on and off still? is there a way to have active LEDs that you can turn on and off?

DarkShot · « **Reply #109 on:** March 04, 2009, 06:59:30 PM »

Quote from: DarkShot on March 04, 2009, 03:46:52 PM

SEARCH

EliteGamer83 · « **Reply #110 on:** March 04, 2009, 08:22:39 PM »

Quote from: DarkShot on March 04, 2009, 06:59:30 PM

Was that a yes?

DarkShot · « **Reply #111 on:** March 05, 2009, 12:48:25 PM »

I didn't give you a bloody answer, cause I said to Search.

Yes direct contact are DIRECTly connected to the speakers.

And of course you can turn them on and off.

In order for you to do that, you need to use the search.

It's there for a freakin reason.

Need I say search any more?

EliteGamer83 · « **Reply #112 on:** March 05, 2009, 05:43:55 PM »

Quote from: DarkShot on March 05, 2009, 12:48:25 PM

I didn't give you a bloody answer, cause I said to Search.

Yes direct contact are DIRECTly connected to the speakers.

And of course you can turn them on and off.

In order for you to do that, you need to use the search.

It's there for a freakin reason.

Need I say search any more?

Yeah, there's no way to turn them on and off if you use direct contact.

DarkShot · « **Reply #113 on:** March 06, 2009, 11:54:34 AM »

(-.-)

There is.

EliteGamer83 · « **Reply #114 on:** March 06, 2009, 12:32:44 PM »

Quote from: DarkShot on March 06, 2009, 11:54:34 AM

(-.-)

There is.

I used your "SEARCH button" and couldn't find anything

Blazinkaos · « **Reply #115 on:** March 06, 2009, 12:49:58 PM »

you have to add switch to it in a certain spot to turn them off. Or you can use the hold or wifi.

EliteGamer83 · « **Reply #116 on:** March 06, 2009, 01:00:45 PM »

Quote from: Blazinkaos on March 06, 2009, 12:49:58 PM

you have to add switch to it in a certain spot to turn them off. Or you can use the hold or wifi.

Yeah I was in paint trying to figure it out but I can't :\

Blazinkaos · « **Reply #117 on:** March 06, 2009, 01:27:47 PM »

Here i know someone that can help you out hes really good at mapping out this stuff. Talk to rceckspurt13.

EliteGamer83 · « **Reply #118 on:** March 06, 2009, 03:25:54 PM »

this is what I had, but now I'm stuck.

Blazinkaos · « **Reply #119 on:** March 06, 2009, 05:02:55 PM »

were the leds at.

News:

Author Topic: L0rdNiC0s tutorial for the Sound Reactive LED Mod for the Slim (Read 148492 times)