Author Topic: Switching a memory stick...  (Read 2801 times)

Offline Slimby

  • Acid Modder
  • *
  • Posts: 727
  • Post quality +3/-0
  • Gender: Male
Switching a memory stick...
« on: January 12, 2008, 01:42:05 AM »
As we know, pin 9 of the MSPD is the VCC pin. I've wired up 2gb internally, pin for pin, with a 2 way switch on pin 9. Switching it one way connects internal to the power supply, switching it the other way switches the swappable memory. However, neither memory stick is recognised by the PSP. I'm certain I have a bad connection on pin 9, but do any of you gentlemen (or RA1N) think it might be something else?

Slimby

Slimby for prez.

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Switching a memory stick...
« Reply #1 on: January 12, 2008, 01:48:11 AM »
i would agree maybe try a different switch

 :hifive: good job of stealing the 100,00th post from Robin.

PINOY AKO

Offline Slimby

  • Acid Modder
  • *
  • Posts: 727
  • Post quality +3/-0
  • Gender: Male
Re: Switching a memory stick...
« Reply #2 on: January 12, 2008, 01:55:02 AM »
I might try soldering the two wires together, and seeing if that works. If so, I'll try another switch.

Slimby

Slimby for prez.

Offline vskid

  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +0/-0
  • Gender: Male
    • vskid3 Industries
Re: Switching a memory stick...
« Reply #3 on: January 12, 2008, 11:29:42 AM »
I just posted in another thread that you said this in, didn't see this one first.

If a switch on the power doesn't work, try putting a switch on the 2 grounds.  I asked about this on another forum, and thats what I was told should work.

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Switching a memory stick...
« Reply #4 on: January 12, 2008, 11:35:31 AM »
I just posted in another thread that you said this in, didn't see this one first.

If a switch on the power doesn't work, try putting a switch on the 2 grounds.  I asked about this on another forum, and thats what I was told should work.

yea thats a good way because switches like wifi and hold are negative and i'm sure slimby knows this already

PINOY AKO

Offline Slimby

  • Acid Modder
  • *
  • Posts: 727
  • Post quality +3/-0
  • Gender: Male
Re: Switching a memory stick...
« Reply #5 on: January 12, 2008, 06:17:52 PM »
However, from memory the data pin and the negative are connected. I actually think my wifi board is broken, because even when I have one memory stick connected up (minus the switch) it doesn't recognise the stick. I'll do a little more work on it, though.

Slimby

Slimby for prez.

Offline Maximize

  • Who Farted ???
  • *
  • Posts: 199
  • Post quality +0/-0
  • Gender: Male
Re: Switching a memory stick...
« Reply #6 on: January 12, 2008, 09:08:56 PM »
Good luck man, with so many pins, it can be hard to  figure out.  I know Ive spent hours trying to figure out what I  :censored: up!

Offline nez

  • Granny Spanker
  • *
  • Posts: 516
  • Post quality +0/-0
  • Gender: Male
  • Pirate For Life
    • 13xic0n administrator\owner
Re: Switching a memory stick...
« Reply #7 on: January 12, 2008, 09:51:03 PM »
ya bro may the force be with you. that is going to tack some time. it would be great if it works.

i thought i read this some where recently now i know where.


Offline Slimby

  • Acid Modder
  • *
  • Posts: 727
  • Post quality +3/-0
  • Gender: Male
Re: Switching a memory stick...
« Reply #8 on: January 12, 2008, 09:59:04 PM »
Well, I managed to get the internal memory stick to read. I had a couple of loose connections. I think I'm going to take away all the wires in there now, and redo everything with the best joint I can possibly get. It's awfully crowded in there.

Slimby

Slimby for prez.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal