4 leds in triggers? double trigger mod

[tibor28]

hello guys, would it be possible to have 4 0603 leds in the triggers? i would like to do the trigger mod using blue leds that would be turned on/off using HOLD now and later on add a sound reactive mod using green leds. Would it be possible to have the normal trigger mod with the turn on and noff funczion and a sound reactive mod at the same time? How about having the blue and green sound reactive leds ON at the same time?

[4dP]

yes if you drill a big enough hole since the leds is off why do you need to turn off the sound reactive mod

edit: if you want to turn off the sound mod you can add an extra negative so disable sound mod with one and active normal trigger mod by adding another switch to the negative going directly to the negative instead of negative at sound chip

[tibor28]

yes if you drill a big enough hole since the leds is off why do you need to turn off the sound reactive mod

no i only want to be able to turn of the blue leds, not the sound reactive ones, and i dunno about the hole because i will do the sound mod after doing the normal trigger mod so i will proably need 2 holes

[4dP]

just add dip switch to the negatives of the 2 colors of leds

[tibor28]

just add dip switch to the negatives of the 2 colors of leds

why? would the hold switch interfere with the sound leds? I want the sound leds to be active all the time and the normal trigger leds only active when "hold" is on

[4dP]

oh then thats simple i got confused. so solder the negative of the normal mod to hold and add a different switch maybe wifi for sound chip. the negative wire coming from your chip should be put on the switch and your finished

[tibor28]

ok thanks a lot, and would the leds be visible if I place them on the other side of the trigger? i mean the side without the slope

[4dP]

heres an idea on is inside and one is actually behind it because theres a space there

[tibor28]

heres an idea on is inside and one is actually behind it because theres a space there

ok ill do that, i am getting a clear faceplate anyways so it will be even more visible
thx a lot for your fast help

[mootoo]

lol man U steal my idea  go for it 

[tibor28]

lol man U steal my idea  go for it 

haha sorry mootoo any idea where i could get the LM386 chip?? i live in germany

[4dP]

i bought my chips here
http://www.westfloridacomponents.com/mm5/merchant.mvc

you can get resistor here cheap

http://www.opamp-electronics.com/

[tibor28]

i bought my chips here
http://www.westfloridacomponents.com/mm5/merchant.mvc

you can get resistor here cheap

http://www.opamp-electronics.com/

do they ship worldwide?

[4dP]

yes