Author Topic: Is this correct? (Read 7536 times)

Dazzerr-- · « **on:** January 13, 2008, 08:25:39 AM »

Is this correct for led mod

red = led
blue = posative kynar wire
yellow = negative kynar wire
green = powerboard
black = dip switch

4dP · « **Reply #1 on:** January 13, 2008, 08:39:58 AM »

heres a better diagram

if you follow that everything should work

tibor28 · « **Reply #2 on:** January 13, 2008, 08:41:25 AM »

u might need a resistor on the positive wire depends on your leds

Dazzerr-- · « **Reply #3 on:** January 13, 2008, 08:42:15 AM »

damn ive lost it now (grr) is there a tut for a dip switch led mod?

it wasnt your fault lol

i have 0603 blue leds

4dP · « **Reply #4 on:** January 13, 2008, 08:44:09 AM »

Dazzerr-- · « **Reply #5 on:** January 13, 2008, 08:45:35 AM »

tut?

and what are those red flag things?

4dP · « **Reply #6 on:** January 13, 2008, 08:48:00 AM »

those arrows are the leds point is negative

Dazzerr-- · « **Reply #7 on:** January 13, 2008, 08:51:39 AM »

can you state that a bit more clear please?

are the red flag things the leds?

Dazzerr-- · « **Reply #8 on:** January 13, 2008, 11:35:03 AM »

oh so what are the triangle things?

tibor28 · « **Reply #9 on:** January 13, 2008, 12:00:26 PM »

Quote from: Dazzerr-- on January 13, 2008, 11:35:03 AM

oh so what are the triangle things?

those show you the polarity of the led, so which end is positive and negative

Siggen · « **Reply #10 on:** January 14, 2008, 04:38:29 AM »

the longer foot is + in real life,
on the paper the arrow points to -

Dazzerr-- · « **Reply #11 on:** January 14, 2008, 07:23:49 AM »

that means the triangle thingys are the leds right?

And do i need a resistor for blue leds (0603)?

psp_nl · « **Reply #12 on:** January 14, 2008, 10:41:09 AM »

No, you don't need a resistor for blue leds.

*FuFa · « **Reply #13 on:** January 14, 2008, 10:46:49 AM »

Quote from: psp_nl on January 14, 2008, 10:41:09 AM

No, you don't need a resistor for blue leds.

I would rather get one, it makes the LEDs live longer, also there is no danger of burning out, also if he glues them into something like the triggers, the LEDs will melt the glue away leaving a big mess.

Dazzerr-- · « **Reply #14 on:** January 14, 2008, 10:57:44 AM »

Ok thanks FuFa but what resistor do i need?

tibor28 · « **Reply #15 on:** January 14, 2008, 11:48:45 AM »

Quote from: Dazzerr-- on January 14, 2008, 10:57:44 AM

Ok thanks FuFa but what resistor do i need?

10ohm

im also going to use blue leds and i will try without the resistor

Dazzerr-- · « **Reply #16 on:** January 14, 2008, 12:27:59 PM »

Im gonna use one. i get em for free so why not.

Has anybody actually managed to do this plugin yet. i advise you change the name of the plugin to 'lftv_plugin.prx' .
This may work

Do not forget this goes in flash0 NOT seplugins. lol

Siggen · « **Reply #17 on:** January 14, 2008, 12:59:04 PM »

What does led's have to do with prx's?
that last post blew it of for me... :S

redryno1221 · « **Reply #18 on:** January 14, 2008, 08:27:41 PM »

Quote from: *FuFa on January 14, 2008, 10:46:49 AM

I would rather get one, it makes the LEDs live longer, also there is no danger of burning out, also if he glues them into something like the triggers, the LEDs will melt the glue away leaving a big mess.

^that never happened to me and mine have been connected for over 2 months now........ so you really don't as long as you make sure your wires don't cross...

Dazzerr-- · « **Reply #19 on:** January 15, 2008, 08:22:07 AM »

will 15ohms be ok to use for a resistor?

Quote

Has anybody actually managed to do this plugin yet. i advise you change the name of the plugin to 'lftv_plugin.prx' .
This may work

Do not forget this goes in flash0 NOT seplugins. lol

sorry. check this out... https://www.acidmods.com/forum/index.php?topic=14034.0

*FuFa · « **Reply #20 on:** January 15, 2008, 11:48:08 AM »

Quote from: redryno1221 on January 14, 2008, 08:27:41 PM

^that never happened to me and mine have been connected for over 2 months now........ so you really don't as long as you make sure your wires don't cross...

The melting glue only happens IF they would burn out, also they don't burn out when the wires cross, you just short your PSP and make it turn off.