Author Topic: Battery Pack  (Read 3310 times)

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Battery Pack
« on: February 22, 2008, 11:13:22 PM »
i have double A batteries laying around there rechargeable i read on the side of one and it says 1.2v/2000mah so what i wanted to do was hook this all up and hook up a female usb 2 in the 360 controller so i could recharge the batteries with just plugin it into the 360 usb port but the 360 usb port throws out about 5v how can i reduce the voltage to lets say 1.5v?

Offline redryno1221

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
    • Redrynotuts
Re: Battery Pack
« Reply #1 on: February 23, 2008, 08:34:55 AM »
I think you can use a zener diode or a couple resistors...

Offline p3t3r_m

  • Motor Mouth
  • *
  • Posts: 89
  • Post quality +0/-0
  • Gender: Male
Re: Battery Pack
« Reply #2 on: February 23, 2008, 09:24:25 AM »
i have tried this with 2 rechargeable AA batteries and i hadno luck so if you get it working can you please tell me how yu did it and all the ino i know is that i can get 3v from 2 of the pins on the charge circuit i prosume the other 2 are the negatives or sumet but i never found any point on the chargin that was 5v and having 5v with 2 AA batteries wouldnt be that bad they would just get pretty warm lol so if yo do manage to  get it working please tell me how
BLARG!!

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Re: Battery Pack
« Reply #3 on: February 23, 2008, 11:55:16 AM »
its wierd i hook everything up and it wouldnt work every time i plug in the usb 2 the controller would not work but the leds would turn on real dim like if the board was being over charge heres a pic do you think if i add resistor it will work!

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Battery Pack
« Reply #4 on: February 23, 2008, 01:17:42 PM »
they make a thing just to lower voltage. It is called a regulator. I dont know if they make them for that low but I'm sure if you look they might. Just a warning, sometimes you need a heat sink...

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Re: Battery Pack
« Reply #5 on: February 23, 2008, 04:54:19 PM »
what do you mean a heatsink?

Offline aditya

  • Chief squatting Hard
  • *
  • Posts: 21
  • Post quality +0/-0
Re: Battery Pack
« Reply #6 on: February 23, 2008, 09:23:50 PM »
i think heatsink means something to keep it cool from overheating?

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Battery Pack
« Reply #7 on: February 23, 2008, 11:06:04 PM »
yes, its basically what aditya said. What it is, is a block of aluminum or another type of metal, with fins cut in it so that heat goes into it and the air will cool the block making the regulator cooler and more efficient

Offline Azie139

  • Bomb Maker
  • *
  • Posts: 296
  • Post quality +0/-0
  • Gender: Male
    • Myspace.com/Azie139
Re: Battery Pack *updated*
« Reply #8 on: February 24, 2008, 02:33:46 AM »
i know what you mean now but how bout i use resistor would that work

Edit: i wired it up and i got it working and everything if u guys want pics and vids just let me know
« Last Edit: March 01, 2008, 04:31:27 PM by Azie139 »

Offline redryno1221

  • Granny Spanker
  • *
  • Posts: 430
  • Post quality +0/-0
  • Gender: Male
    • Redrynotuts
Re: Battery Pack
« Reply #9 on: March 15, 2008, 11:36:22 PM »
How bout some pics and vids :victory:

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal