Author Topic: Rapid Fire Method (No Chip) (Read 379849 times)

xStang05 · « **Reply #210 on:** July 30, 2008, 10:22:56 AM »

Quote from: KingMike_OS on July 29, 2008, 10:20:55 PM

here the basic installation for the right trigger to do rapid fire with a on/off switch

so do i need that chip shown in the top right of the pic? or rly just a momentary switch and 30 gauge wrapping wire? and how am i supposed to get the trigger through the controller so i can use it during gameplay when the controllers back together?

PspKicks316 · « **Reply #211 on:** July 30, 2008, 12:11:10 PM »

Quote from: xStang05 on July 30, 2008, 10:22:56 AM

so do i need that chip shown in the top right of the pic? or rly just a momentary switch and 30 gauge wrapping wire? and how am i supposed to get the trigger through the controller so i can use it during gameplay when the controllers back together?

Read >_>
You need the PIC in the top right. You need to program it with the special HEX code using a PIC programmer. For the button...you need to drill a hole in the controller and put the button somewhere...Or use the sleeper method instead to just use the sync button and not an external button

BlindMaphisto · « **Reply #212 on:** July 30, 2008, 12:15:53 PM »

Does this three wire kit have the same problems with voltage that the original posted method had?

SYSTEM aka (Cyberpyrot) · « **Reply #213 on:** July 30, 2008, 12:17:46 PM »

Quote from: BlindMaphisto on July 30, 2008, 12:15:53 PM

Does this three wire kit have the same problems with voltage that the original posted method had?

nope

m@DDm!k3 · « **Reply #214 on:** July 30, 2008, 12:54:01 PM »

Acually i just ryed this yesterday on the new controller type at first it didnt seem to work but when i held down the R trigger then pressed my modded button it shot like i was pressing the R trigger normally so what i do i shoot my controller like a paintball gun and its just as fast as the video

I only used the 30-gauge wire and the momentary switch by the way no PIC chip

xStang05 · « **Reply #215 on:** July 30, 2008, 01:16:00 PM »

i thought i only needed 30 gauge wrapping wire and a momentary switch?

chimp007 · « **Reply #216 on:** July 30, 2008, 01:16:37 PM »

I jut bought the 3 wire kit, and does the chip come programmed?

http://wiredinput.com/ShopUSA/product_info.php?cPath=22&products_id=76

Nemesis · « **Reply #217 on:** July 30, 2008, 02:44:13 PM »

Quote from: chimp007 on July 30, 2008, 01:16:37 PM

I jut bought the 3 wire kit, and does the chip come programmed?

http://wiredinput.com/ShopUSA/product_info.php?cPath=22&products_id=76

yes of course

DjBulletFast · « **Reply #218 on:** July 30, 2008, 03:42:39 PM »

Does the chips work with wired controllers? Because I think I am going to try to do it on my wired then if that works then one of my wireless.

Godly · « **Reply #219 on:** July 30, 2008, 10:09:09 PM »

Wait.. so this only works with OLD controller?

KingMike_OS · « **Reply #220 on:** July 31, 2008, 12:05:30 AM »

Quote

Does the chips work with wired controllers? Because I think I am going to try to do it on my wired then if that works then one of my wireless.

Why oh why people don't read ...

I i think i did say on the website .. let me post it here to help gezzzz

From me

Quote

This Mod Works on old and new Style Wireless. it has been tested on both type wireless but not wired ones.

Now if you like you can send me a wire controller to test sure we can so that

MadMan666 · « **Reply #221 on:** July 31, 2008, 10:16:12 AM »

KingMike_OS I want to say thanks for making this.

I am ordering a few of the chips from your site to install on some friends controllers.
I have a question. I dont want to get the kits as all I need other then the chips are the buttons. (I already have more wire and solder then I know what to do with)
I have a local electronics shop that has a large selection of buttons. they actually have 5 different 7mm tact buttons. Is there anything special I need or are the signals low enough that it wont matter witch ones I get?

Nemesis · « **Reply #222 on:** July 31, 2008, 11:16:51 AM »

Quote from: MadMan666 on July 31, 2008, 10:16:12 AM

KingMike_OS I want to say thanks for making this.

I am ordering a few of the chips from your site to install on some friends controllers.
I have a question. I dont want to get the kits as all I need other then the chips are the buttons. (I already have more wire and solder then I know what to do with)
I have a local electronics shop that has a large selection of buttons. they actually have 5 different 7mm tact buttons. Is there anything special I need or are the signals low enough that it wont matter witch ones I get?

get the 7mm tact buttons

acid mods my word · « **Reply #223 on:** July 31, 2008, 11:27:53 AM »

where can i fing a

button? lol andhow can u tell if your controller is a the new version or not? Will a hot glue gun work as well as well as the sottering gun or do u have to use a sottering gun? What else can i use instead of a sottering gun?

MadMan666 · « **Reply #224 on:** July 31, 2008, 12:43:10 PM »

Quote from: Nemesis on July 31, 2008, 11:16:51 AM

get the 7mm tact buttons

I just noticed they added the buttons as a separate item on the site. cool

MadMan666 · « **Reply #225 on:** July 31, 2008, 12:46:24 PM »

Quote from: acid mods my word on July 31, 2008, 11:27:53 AM

where can i fing a button? lol andhow can u tell if your controller is a the new version or not? Will a hot glue gun work as well as well as the sottering gun or do u have to use a sottering gun? What else can i use instead of a sottering gun?

there are posts in this thread about how to tell witch controller you have. I dont remember how far back but there are some

and the glue gun is just to hold the chip in place
the soldering iron is needed for making the connections.

armyffcav · « **Reply #226 on:** July 31, 2008, 06:22:52 PM »

I saw this sight last night... I thought it was to good to be true, but hell it was worth a try. So this A.M. I was passing a Radio Shack and stopped in and bought a button and wires. When I got home I took it apart and tried, it didn't work at first but it was a connection problem after 15 minutes of playing with it I had it complete. Thanks for saving me a ton.

MrBatty1 · « **Reply #227 on:** July 31, 2008, 07:20:02 PM »

looks complicated !!!!!!!

Black-man23 · « **Reply #228 on:** July 31, 2008, 07:49:38 PM »

yo, i want to do the spit-fire controller mod. i found it on hackaday.com posted apr 21st. it was the black comtroller. i take it u need a "chip". im new to this but i was wondering where i can get the instructions and a list parts to the spit-fire mode controller.

l0rdnic0 · « **Reply #229 on:** July 31, 2008, 08:14:57 PM »

I LOVE YOU GUYS!!!!!!

Nemesis · « **Reply #230 on:** August 01, 2008, 03:48:45 AM »

Quote from: Black-man23 on July 31, 2008, 07:49:38 PM

yo, i want to do the spit-fire controller mod. i found it on hackaday.com posted apr 21st. it was the black comtroller. i take it u need a "chip". im new to this but i was wondering where i can get the instructions and a list parts to the spit-fire mode controller.

https://www.acidmods.com/forum/index.php?topic=17385.0

if your new to modding this really isnt the easiest mod to start with

Recox99 · « **Reply #231 on:** August 01, 2008, 07:56:16 AM »

I found anew way if this is giving you problems it worked on old and new style controllers
follow this and it will rapid fire

I did find this my self please give me credit

yuckzee · « **Reply #232 on:** August 01, 2008, 05:33:57 PM »

ok im sorry but ive read threw abount half of this fourm and i dont have alot of time so sorry if i bother any one...

ok so im trying to git rapid fire for the right trigger, and for it to work on halo3...and i know it can be done because ive seen it...

so what do i need, and how do i do it

thanks for any help you guys, you all seem to be doing a realy good job all ready

yuckzee · « **Reply #233 on:** August 01, 2008, 05:56:55 PM »

Quote from: Recox99 on August 01, 2008, 07:56:16 AM

I found anew way if this is giving you problems it worked on old and new style controllers
follow this and it will rapid fire

I did find this my self please give me credit

ok so what kind of wire did you use for it? and i can use any kind of button, or what, can you make a vid?

KingMike_OS · « **Reply #234 on:** August 01, 2008, 07:02:16 PM »

I know about using the rumble ground .. it is not stable it will fire one then 3 and then full clip there is a lot of delay .. and the only reason it works becuse when you fire the first shot it will turn the rumble and when it spins it make pulse like , but its not 100% time work right. that is why i pick
Led since it s active pulse at all time .

MrRetep · « **Reply #235 on:** August 01, 2008, 10:01:32 PM »

Hey Folks Registered just for this Method of Rapid Fire

Ok so ive decided im going to buy the kit from your website for $12.99, but i have a couple questions, I really dont want to add an external button to my controller. So i was wondering if I can use the Kit to mod my controller in the sleeper method, where i just wire it up to the Sync button? And if so does the kit with instructions or am on my own? lol well any way great job! this seems to work well, and im looking forward to trying this

KingMike_OS · « **Reply #236 on:** August 01, 2008, 11:17:31 PM »

here how to make the kit in to sleeper

https://www.acidmods.com/forum/index.php?topic=21452.0

MrRetep · « **Reply #237 on:** August 02, 2008, 12:01:21 AM »

Sweet thanks! Will buy once its in stock on monday!

You guys are great! Once again thanks for making this available at such low prices.

SpartanXx666xX · « **Reply #238 on:** August 02, 2008, 10:42:23 AM »

Quote from: Xboxexpert on July 28, 2008, 11:39:37 AM

Listen up. I'm Xboxexpert and I run www.thexboxexpert.com which sells professionally modified Rapid Fire Controllers. I was ecstatic to see this post until I actually tried it. My results are in the YouTube video below. I've also tried it on a NEW Style controller with the same results....IT DOESN'T WORK.

http://www.youtube.com/watch?v=Yj-3ptc6XYo

well now i know i'm not going to his website haha, i am a complete noob and i did this in less than 10 min and it works. i didnt even know how to soder and i did this SO stop trying to shoot it down the hard work these guys put in.

lag major · « **Reply #239 on:** August 02, 2008, 10:57:34 AM »

this is awsome i might try it

News:

Author Topic: Rapid Fire Method (No Chip) (Read 379849 times)