Author Topic: Rapid Fire Pic help (Read 52697 times)

shrek09 · « **Reply #30 on:** June 08, 2008, 02:33:00 AM »

hi gamers

can any body send me the code for the chip pic12c508a

what size chip would you recommed the pic 16 or the pic 12

thank you

shrek09 · « **Reply #31 on:** June 08, 2008, 09:28:37 AM »

help help

can anybody tell me the code for 12c508a

and what pic would you recommend a 16 0r 12

thank you

Frasch · « **Reply #32 on:** June 15, 2008, 03:56:04 PM »

:help:OK i need a hex code for the PIC Chip 12F683 I/P. Doesnt matter if it goes to the trigger or if i add a button on the back. Just need to know what the code is for before i begin the process. Also what kid on software will work for me to be able to put on the chip. Will this work to program it WinPIC800 V3.59. Thanks

lunchboxrts · « **Reply #33 on:** June 23, 2008, 12:58:33 AM »

Quote from: KingMike_OS on June 07, 2008, 11:38:32 PM

if you have a PIC16F84A there are 2 hex code to download

X801769-026 COD4-Basic-All-Models

Once you download the HEX file for the right controller need to write the Hex code to the
Pic in order to do that need a programmer which you can buy here

http://www.imagesco.com/microcontroller/pic-programmers.html

Now you ready to play ..

if you don't have a programmer we sell preflash Pic on our wesite you can order that here :

http://wiredinput.com/ShopUSA/product_info.php?cPath=30&products_id=32

Now if you don't have PIC16F84A that means you did not read the Tutorials
as its stated that the hex files above will only work with PIC16F84A.

Do you have the ASM or C Code Available? I want to play around with modding my controller?

spivey8 · « **Reply #34 on:** July 02, 2008, 07:52:44 PM »

i have a 12f683 I/P ... its already programed... just wanted to know if i got a programer, would i be able to get the files i needed on this chip to flash other 12f683 I/P thanks for any help

Nemesis · « **Reply #35 on:** July 02, 2008, 11:31:00 PM »

Quote from: spivey8 on July 02, 2008, 07:52:44 PM

i have a 12f683 I/P ... its already programed... just wanted to know if i got a programer, would i be able to get the files i needed on this chip to flash other 12f683 I/P thanks for any help

if you could, i think you can, and you posted it here, that would be a whole load helpful to many of us and we would greatly appreciate it

spivey8 · « **Reply #36 on:** July 03, 2008, 06:45:32 AM »

i plan on it, just need to pick up a programer that can read these things... ill see what i can get.

KingMike_OS · « **Reply #37 on:** July 03, 2008, 05:30:29 PM »

send me the chip and i pull the code from it ...

Pm me for my address.

is this the same chip is use on this kit

Xbox 360 Dual Rapid Fire Controller Mod Kit Halo 3 COD >>>> ???

Markw · « **Reply #38 on:** July 05, 2008, 03:53:00 AM »

Quote from: KingMike_OS on July 03, 2008, 05:30:29 PM

send me the chip and i pull the code from it ...

Pm me for my address.

is this the same chip is use on this kit

Xbox 360 Dual Rapid Fire Controller Mod Kit Halo 3 COD >>>> ???

Hi Mike, in your link, would that be a standard 555timer chip ? or would it have to be a chip I need to program ?

Thanks
Mark

Markw · « **Reply #39 on:** July 05, 2008, 04:00:09 AM »

Quote from: SYSTEM on May 15, 2008, 03:40:36 PM

The 555 timer is a pre programmed chip which cannot be altered. People use this to do the tri er rapid fire with the help of a NPN transistor creating like a switch that opens and closes with each pulse of the 555 timer. I have created a more advanced macro controller with software I wrote with a pic programmer. The diffreence with a 555 time and a chip you program your self is with the chip you program you can ajust the speed of fire eg ( 30 Ns ) rate of fire ( 3 round burst )...

Hi Can you tell me more about this please.
I have a standard wireless controller and all I want is a basic rapid fire button.
I have just be and got NE555N 8 pin & 7555N (low voltage)from maplin electronincs.

Would either of them be ok, is there a tut. do I need the NPN transitstor? if so were does it go ?

Sorry I am a noob at this. I also have 1k ohm resistors. would I need anything else ?
Many thanks

KingMike_OS · « **Reply #40 on:** July 05, 2008, 01:05:05 PM »

i was talking about 12f683 I/P pic not a 555 timer

Markw · « **Reply #41 on:** July 05, 2008, 01:57:38 PM »

Quote from: KingMike_OS on July 05, 2008, 01:05:05 PM

i was talking about 12f683 I/P pic not a 555 timer

Sorry, my mistake then.

Would you happen to know if a 555 timer would work, and if so...

What components would I need ?
Is there a tut for a 555 timer rapid fire 360 wireless controller ?

Salincer · « **Reply #42 on:** July 06, 2008, 04:37:11 AM »

Quote from: Markw on July 05, 2008, 01:57:38 PM

Sorry, my mistake then.

Would you happen to know if a 555 timer would work, and if so...

What components would I need ?
Is there a tut for a 555 timer rapid fire 360 wireless controller ?

xbox scene has a nice one. It doesnt work for new cg controllers though. But heres a link,
http://forums.xbox-scene.com/index.php?showtopic=643928&st=0

Also, System, you posted 2 files on page 1,
one named COD4-all models

Whats is that? i know its a hex file but for the PIC16F84A?

And, where is the tutorial on hooking this bad boy up?

Nemesis · « **Reply #43 on:** July 06, 2008, 05:52:30 AM »

Quote from: Salincer on July 06, 2008, 04:37:11 AM

xbox scene has a nice one. It doesnt work for new cg controllers though. But heres a link,
http://forums.xbox-scene.com/index.php?showtopic=643928&st=0

Also, System, you posted 2 files on page 1,
one named COD4-all models

Whats is that? i know its a hex file but for the PIC16F84A?

And, where is the tutorial on hooking this bad boy up?

wait are you the same salincer as on XS?
basically i think what all models means is for all controller boards, also that hex file is only for PIC16F84A. the spitfire is different to rapid fire as the PIC is hooked up to all the buttons on the controller, and so allowing you to program it in different ways and being able to use all the buttons as e.g a special combo.
spitfire tutorial - https://www.acidmods.com/forum/index.php?topic=17385.0

darkside0foz · « **Reply #44 on:** July 06, 2008, 10:27:25 AM »

Has anyone at all figured out everything that you need to program an 8 pin PIC chip and would be willing to share it with me. I want a chip just like the ones that are sold in kits on ebay along with two buttons and some wire. I just want to make the chip for myself rather than paying $30 for it. Help would be very much appreciated. Thanks

SYSTEM aka (Cyberpyrot) · « **Reply #45 on:** July 06, 2008, 11:49:19 AM »

https://www.acidmods.com/software/PIC12F683.rar

Please no one use this file for monitary gain we offer free info for our members...

darkside0foz · « **Reply #46 on:** July 06, 2008, 04:45:28 PM »

how do you open the above .rar file? My programs ask me for a password.

SYSTEM aka (Cyberpyrot) · « **Reply #47 on:** July 06, 2008, 04:51:03 PM »

Quote from: darkside0foz on July 06, 2008, 04:45:28 PM

how do you open the above .rar file? My programs ask me for a password.

Cyber said you guys would know the AM password

darkside0foz · « **Reply #48 on:** July 06, 2008, 05:12:20 PM »

well can you help me out, or tell me how to go about getting this password, I obviously don't know this password.

SYSTEM aka (Cyberpyrot) · « **Reply #49 on:** July 06, 2008, 05:16:32 PM »

he said the older guys would know

darkside0foz · « **Reply #50 on:** July 06, 2008, 05:31:15 PM »

if its the answer to this riddle that I have read about then you have to at least give me the riddle because I can't seem to find it. Do you even know it SYSTEM?

SYSTEM aka (Cyberpyrot) · « **Reply #51 on:** July 06, 2008, 05:33:13 PM »

Quote from: darkside0foz on July 06, 2008, 05:31:15 PM

if its the answer to this riddle that I have read about then you have to at least give me the riddle because I can't seem to find it. Do you even know it SYSTEM?

I dont know it yet but I suspect reaper or Robin knows it..

darkside0foz · « **Reply #52 on:** July 06, 2008, 06:13:32 PM »

I've got messages in to both of them but they may or may not be willing to answer me. Your help would be much appreciated SYSTEM. Thanks

SYSTEM aka (Cyberpyrot) · « **Reply #53 on:** July 06, 2008, 07:11:30 PM »

OK He uploaded password free files

darkside0foz · « **Reply #54 on:** July 08, 2008, 12:09:31 PM »

what are VSS and VDD on the diagram, I assume that they are positive and ground but which is which. Thanks You

SYSTEM aka (Cyberpyrot) · « **Reply #55 on:** July 08, 2008, 12:50:34 PM »

Quote from: darkside0foz on July 08, 2008, 12:09:31 PM

what are VSS and VDD on the diagram, I assume that they are positive and ground but which is which. Thanks You

VSS = ground
VDD = 3V

SYSTEM aka (Cyberpyrot) · « **Reply #56 on:** July 08, 2008, 12:51:42 PM »

also you will ne to do the 10K resisters on the buttons just like the original spitfire mod or you will have a floating pin..

corby7 · « **Reply #57 on:** July 11, 2008, 04:17:16 PM »

Quote from: SYSTEM on July 06, 2008, 11:49:19 AM

https://www.acidmods.com/software/PIC12F683.rar

Please no one use this file for monitary gain we offer free info for our members...

So this hex file will work as code for this particular chip as rapid fire code...Right? And will it work on COD4 and Halo's. Or will it have to be altered?

Great work, this site is very nice.

redryno1221 · « **Reply #58 on:** July 11, 2008, 04:48:35 PM »

this hex code is only for that particular chip but it will work for any game...

corby7 · « **Reply #59 on:** July 12, 2008, 05:51:29 PM »

Thanks

News:

Author Topic: Rapid Fire Pic help (Read 52697 times)