Author Topic: new case UPDATE: im published! april 12 (Read 30218 times)

StealthedHunter · « **Reply #30 on:** October 01, 2008, 08:30:32 AM »

pretty cool...do any of the fans have lights on em? if not then were ganna need for you to have lights...it is a law

Tec_ · « **Reply #31 on:** October 04, 2008, 11:34:46 PM »

Quote from: StealthedHunter on October 01, 2008, 08:30:32 AM

pretty cool...do any of the fans have lights on em? if not then were ganna need for you to have lights...it is a law

............................

don't ever speak to me again

MattZani · « **Reply #32 on:** October 05, 2008, 12:29:41 PM »

Lol, You better be keeping the Lighting suttle on this, god i hate blinding LED Jobs, looks cheap, tacky, and

.

People are far more impressed by a soft glow!

shadymnms · « **Reply #33 on:** October 05, 2008, 02:49:00 PM »

If it's just for gaming dont get the Q6600, even the E8400 may not be the best choice. I have used both the E7200 and E8500, in the same machine and while the E7200 was able to overclock higher the smaller cache did NOT handicap it at all against the E8500. Also I still have both processors if your intererested, little dirty but nothing some 90% Isopropyl alchohol can't fix, I also have pleny of sata HD's and DVD rw drives. Pretty much have a two whole computers, just the motherboards are bad...

aZiZ1 · « **Reply #34 on:** October 06, 2008, 11:25:56 AM »

Tec, You have some seriuesly awesome ideas, if possible can u get into contact with me or i can contact u over the internet, i have some ideas id like to run by a professional like yourself. Also mattzani What i did was to get the soft underglow was i got a 12inch blue cathode and took of the top(cube) and filled that thing to the brink with hot glue and let it dry(make sure its clear hot glue). When dried it is amazingly sweet.

EDIT!!!!!!!!!!!!

Hey Tec, I have an antec Case door(white) that i could send you, its the kind that has a handle on it so you could do something with that. My Question to you is, wouldnt be more pleasing to the eye if the user would not be able to see the inside of ur case from the radiator angle side, How are going to hide all the cables and such, i know you are a clean modder like me who cant stand cables in a place... Let me know what you think.

Tec_ · « **Reply #35 on:** October 07, 2008, 12:41:29 AM »

i thought about custom cuting a sheet of aluminum for the side, but i don't want to have to deal with the paint/anodizing of it. as for cabels, there will be some sevier PSU modding. also a modular PSU will make some things easear, plus i still have a few tricks left

and aZiZ1 check your pm

whitetop · « **Reply #36 on:** October 07, 2008, 02:16:24 AM »

nicly do thats like the one i was going to get but maplins ranout so im still waiting for them to have more it 3months later lol

Tec_ · « **Reply #37 on:** October 07, 2008, 10:12:46 AM »

Quote from: whitetop on October 07, 2008, 02:16:24 AM

nicly do thats like the one i was going to get but maplins ranout so im still waiting for them to have more it 3months later lol

Hate to be the one to tell you this but they stoped making the 300. They have moved on to the 350. They still have them at xoxide.com or you can try ebay

aZiZ1 · « **Reply #38 on:** October 07, 2008, 12:11:01 PM »

Hmm, i was never a fan of the 300, it seemed to me that they had shaved down alot of quality.

whitetop · « **Reply #39 on:** October 07, 2008, 03:36:49 PM »

no no it cannot be true my 300 nnnnnnnoooooo

well i went to maplins today and seen a very sexy media tower for 40$

Tec_ · « **Reply #40 on:** October 10, 2008, 11:50:00 PM »

Quote from: whitetop on October 07, 2008, 03:36:49 PM

no no it cannot be true my 300 nnnnnnnoooooo

well i went to maplins today and seen a very sexy media tower for 40$

you should check your PM's

moving on

well i got home from my last work trip to find my acrylic waiting for me. took today off went to a wake for i guy i went to school with, worked a little on the computer and just decompressed a little.

i got the side cut and sanded down nicely. but my jig saw bit in and jumped when i was cutting the spot for the radiator and ended up cracking the acrylic in a few different places. im going to scrap this piece and cut a new one.

on to the pic's

you can see one of the smaller cracks near the screw

StealthedHunter · « **Reply #41 on:** October 11, 2008, 10:10:49 AM »

>< this makes me want to make a custom case. I got an old dell case that I have removed all the hardware from, but it still all works, I am going to cut a window in it and install a couple fans and an exhuast. As soon as I can get a new dremel blade ima cut the window >< Also if you need some cool idea look up monstermawds or something like that on youtube. They has some great case mod tutorials. They made this fan mount thing on the front of there case that looks awesome and I have never seen anything like it before

Tec_ · « **Reply #42 on:** October 11, 2008, 11:52:41 AM »

Quote from: StealthedHunter on October 11, 2008, 10:10:49 AM

>< this makes me want to make a custom case. I got an old dell case that I have removed all the hardware from, but it still all works, I am going to cut a window in it and install a couple fans and an exhuast. As soon as I can get a new dremel blade ima cut the window >< Also if you need some cool idea look up monstermawds or something like that on youtube. They has some great case mod tutorials. They made this fan mount thing on the front of there case that looks awesome and I have never seen anything like it before

ive never hurd of it.

im also in the process of making a case for my buddy ware im building a custom frount.

it will have a turbine on it.

side panel

aZiZ1 · « **Reply #43 on:** October 12, 2008, 04:50:24 PM »

Dude that is Baller, let me guess the case that ur modding for ur friend is an emachine?
Your LianLi is turning out to be awesome

Tec_ · « **Reply #44 on:** October 12, 2008, 10:06:04 PM »

Quote from: aZiZ1 on October 12, 2008, 04:50:24 PM

Dude that is Baller, let me guess the case that ur modding for ur friend is an emachine?
Your LianLi is turning out to be awesome

ha ha it is.

well i rocked out the drive bay side today. but first i started with painting the fan that came with the case and the cap screws im going to be using to hold the acrylic in place.

fan disassembly
(sorry for the crappy pic's they came from a cell phone)

masked off the blades

painted and assembled

and the screws

moving on to the side panel

i am in love with it. it turned out so well i just need to file down the rough edges on the aluminum.

DubbleDutch · « **Reply #45 on:** October 13, 2008, 09:50:33 PM »

looks nice tec_

you should sand the bar thingy's they are a little not straight :P

Tec_ · « **Reply #46 on:** October 14, 2008, 02:03:24 PM »

Quote from: Tec_ on October 12, 2008, 10:06:04 PM

i am in love with it. it turned out so well i just need to file down the rough edges on the aluminum.

MattZani · « **Reply #47 on:** October 15, 2008, 02:27:02 PM »

Love the Slight Ghetto Look of the new Side Panel, but im guessing your trying for the professional clean look.

Tec_ · « **Reply #48 on:** November 06, 2008, 05:02:06 PM »

I bought some parts today. Should be shipped by the time I get home from this business trip im on.

video card

mobo

CPU

looking forward to geting home

FreeK · « **Reply #49 on:** November 07, 2008, 08:47:32 AM »

that thing looks sweet with the green and prob going to be better with the parts in it

Tec_ · « **Reply #50 on:** November 29, 2008, 08:16:56 PM »

so my parts came in awhile a go but yeah swaping servers is fun

still need to buy: PSU, Ram, HDD, Dist Drive, pump and water blocks, but enough about that on to the pics

Processor (Q6600)

MOBO

and the GPU

this card blew me away i cant wait to get this thing under power.

and wile i was opining the card the little one came to see what i was doing.

and then my ESD wrist strap became a toy

back to the box. asus threw in a leather mouse pad. its quite funny

and in the case

their is no room in this case, this is going to be fun trying to make all this fit its a good thing i cut the other half of the drive bay out.

im sure im forgetting something but my brain isn't working for some reason right now.

Tec_ · « **Reply #51 on:** December 01, 2008, 08:47:45 PM »

so my switches got in. the top switch will be used for the power and the ring will light up green when the computer is on. and the bottom switch will be the reset and the dot in the center will light up green for the HDD indicator

was

is now

(should mention i think im going to paint the whole thing soon)

also i bought a TV

the 360 is down there in the corner

psp339 · « **Reply #52 on:** December 01, 2008, 10:09:51 PM »

I bought the same rad and its coming at the end of this week with the rest of my watercooling stuff.

PhenomenalDesigns · « **Reply #53 on:** December 05, 2008, 11:59:28 AM »

Very nice, I saw this on bit-tech

Also, if possible you should put UV paint (the non conductive kind) on all your motherboard plastic peices, looks very nice with a subtle UV light or even better, black light if you can find one

Tec_ · « **Reply #54 on:** December 06, 2008, 02:04:22 PM »

Quote from: PhenomenalDesigns on December 05, 2008, 11:59:28 AM

Very nice, I saw this on bit-tech

Also, if possible you should put UV paint (the non conductive kind) on all your motherboard plastic peices, looks very nice with a subtle UV light or even better, black light if you can find one

naw the DFI lanparty Jr. is U.V. Reactive enough

Tec_ · « **Reply #55 on:** January 23, 2009, 01:46:39 AM »

proof that no UV paint is needed

also small update
more parts have been ordered

CPU Block
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=199&products_id=24981

GPU Block
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=240&products_id=24820

PUMP
http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=201&products_id=4508

I am ridiculously behind ware I want to be in this project. Digital Overload is on the 6th of march so I have just over a month to knock this thing out. More parts will be ordered in the next week. And hope fully I can start on a proper side panel

PsychoticWolf · « **Reply #56 on:** January 23, 2009, 03:20:09 AM »

Dude Tec_ that is awesome. 2 thumbs up

Its a Nice set up so far.

Tec_ · « **Reply #57 on:** February 02, 2009, 01:03:33 PM »

ok so as i promised hear are the pics of my new water cooling parts

my Laing pump with the alpha cool top

sitting on top of the power led

my EK full cover 4870 GPU block

again sitting on top of the power led

my danger den intel 775 CPU cooler

i like this block a lot

again power led

and the other equipment (coolant, dye, and hoses)

im going to see if i cant pick up some aluminum for the new side panel today

robin1989 · « **Reply #58 on:** February 02, 2009, 01:53:02 PM »

very nice tec_ - ive always wanted to take a crack at watercooling but been to scared lol. maybe its time i gave it a go with my old P4 rig as thats not used. infact thinking about it whats the lowest operating temp of this sort of stuff can it endure liquid nitrogen as my mum might let me borrow some if she is in a good mood when im home over easter

tmandt · « **Reply #59 on:** February 02, 2009, 03:59:11 PM »

dude havent seen this thread in a while. its turing out nice very nice

News:

Author Topic: new case UPDATE: im published! april 12 (Read 30218 times)