« previous next »
Pages: [1]   Go Down

Author Topic: Will this work?  (Read 4626 times)

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Will this work?
« on: June 07, 2008, 05:01:10 AM »
This RAM water cooler block http://www.xoxide.com/koolance-ram-30-v06.html
with this motherboard http://www.newegg.com/Product/Product.aspx?Item=N82E16813188024

The RAM block description says it's not compatible with some motherboards so I wanna make sure it'll work.
Logged

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Will this work?
« Reply #1 on: June 07, 2008, 05:58:20 AM »
You will not need watercooling for RAM, ram doesnt need any cooling, as the ones that would need some form come with heatsinks.

Leave the ram alone.
Logged
Retired Modder, minor dabbling from now on :P

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #2 on: June 07, 2008, 06:18:13 AM »
Ok thanks Matt. And will a 850watt psu fit in this case? http://www.newegg.com/Product/Product.aspx?Item=N82E16811133056
Logged

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Will this work?
« Reply #3 on: June 07, 2008, 07:25:04 AM »
Yeah, an Armor is a massive case, atleast 3ft tall!
Logged
Retired Modder, minor dabbling from now on :P

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #4 on: June 07, 2008, 08:39:43 AM »
Hm. Well the specs say its 2ft. Still a bit big. I'll look into a different case :P
Logged

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Will this work?
« Reply #5 on: June 07, 2008, 10:37:59 AM »
Armo Junior is around 2Ft, the Armor is atleast 3Ft as i said.
Logged
Retired Modder, minor dabbling from now on :P

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #6 on: June 07, 2008, 11:35:55 AM »
Look at the specs that NewEgg has for it.
23.6" x 9.6" x 24.6"  HxWxD
That is no where near 3ft.

I've decided on this anyway http://www.newegg.com/Product/Product.aspx?Item=N82E16811129043

Logged

Offline Onii

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 65
  • Post quality +0/-0
  • Gender: Male
Re: Will this work?
« Reply #7 on: June 07, 2008, 02:35:12 PM »
If you're still worried about the ram then just secure a fan to em. Lots of dudes I know do that when they OC, or when they buy really cheap ram that needs a HS but doesn't come with one. The new case you picked owns btw. :tup:
« Last Edit: June 07, 2008, 02:36:55 PM by Onii »
Logged

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #8 on: June 07, 2008, 02:44:26 PM »
Thanks man! And nah I'm nor gonna be overclocking I don't think. And the case has enough fans to keep me good for the RAM. Hell, it'll keep me good for a while till I get my WaterCooling system.
Logged

Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: Will this work?
« Reply #9 on: June 07, 2008, 10:37:23 PM »
Quote from: MattZani on June 07, 2008, 05:58:20 AM
You will not need watercooling for RAM, ram doesnt need any cooling, as the ones that would need some form come with heatsinks.

Leave the ram alone.

not a true statement. water cooling ram can be seen as over kill. but keeping it cool is important for fast accurate data transfer.


and @ pspkicks

all power supply's will work with that case. the only time you need to worry about if it will fit or not is if it is a 1000w psu that is longer than a normal or if it is a small form factor psu that is meant for a much smaller case.
Logged

Offline noah03ark

  • E = MC² Mad Scientist
  • *
  • Posts: 1807
  • Post quality +1/-0
  • Gender: Male
  • Überm Sternenzelt richtet Gott, wie wir gerichtet
Re: Will this work?
« Reply #10 on: June 07, 2008, 10:54:55 PM »
Quote from: Tec_ on June 07, 2008, 10:37:23 PM
not a true statement. water cooling ram can be seen as over kill. but keeping it cool is important for fast accurate data transfer.


and @ pspkicks

all power supply's will work with that case. the only time you need to worry about if it will fit or not is if it is a 1000w psu that is longer than a normal or if it is a small form factor psu that is meant for a much smaller case.

yeah ram needs to stay a bit cool...overheating is bad for it

i saw something in a electronics store..it was a bendy fan that was intended for RAM cooling, screw it in w/ your mobo and bend it towards the ram (cooling it a bit, i guess)
Logged

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #11 on: June 08, 2008, 06:56:47 AM »
I'll probably get a fan. I'm only getting essential parts at first to save money,then later getting the other parts I want/need, so I'm not gonna be doing any intense gaming or anything for a bit so I don't think I'll need it at first.
Logged

Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: Will this work?
« Reply #12 on: June 08, 2008, 09:06:09 AM »
Quote from: noah03ark on June 07, 2008, 10:54:55 PM
yeah ram needs to stay a bit cool...overheating is bad for it

i saw something in a electronics store..it was a bendy fan that was intended for RAM cooling, screw it in w/ your mobo and bend it towards the ram (cooling it a bit, i guess)

its called a spot cooler. its a 80mm fan on a flexible neck that you can position to blow on any thing you need it to.

personally i don't like them but thats because i like supper clean cases. i hate seeing wires
Logged

Offline Onii

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 65
  • Post quality +0/-0
  • Gender: Male
Re: Will this work?
« Reply #13 on: June 08, 2008, 11:22:24 AM »
How many sticks are ya using? I mean if you're using 2x2gb or 2x4gb then there's absolutely no need to get any extra cooling. I mean if you wanted 4 sticks that are all cramped together then it MIGHT be another story, but really you only need an extra fan if A. RAM doesn't have a heatsink or B. you're gonna OC it like mad. There should be enough space between the sticks for enough air to keep it runnin cool.
Logged

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #14 on: June 08, 2008, 11:31:48 AM »
2 sets of 4gb dual channel ddr2 ram [2x 2gb sticks]
« Last Edit: June 08, 2008, 11:38:20 AM by pspkicks316 »
Logged

Offline noah03ark

  • E = MC² Mad Scientist
  • *
  • Posts: 1807
  • Post quality +1/-0
  • Gender: Male
  • Überm Sternenzelt richtet Gott, wie wir gerichtet
Re: Will this work?
« Reply #15 on: June 08, 2008, 11:32:26 AM »
Quote from: Tec_ on June 08, 2008, 09:06:09 AM
its called a spot cooler. its a 80mm fan on a flexible neck that you can position to blow on any thing you need it to.

personally i don't like them but thats because i like supper clean cases. i hate seeing wires
yeah it would look messy, but if it keeps it cool then oh well :/
Logged

Offline Onii

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 65
  • Post quality +0/-0
  • Gender: Male
Re: Will this work?
« Reply #16 on: June 08, 2008, 05:15:43 PM »
Quote from: pspkicks316 on June 08, 2008, 11:31:48 AM
2 sets of 4gb dual channel ddr2 ram [2x 2gb sticks]

DDR2-800? If they have heatsinks you're fine. Its the OC/overvolt that makes em hot, or runnin in a SFF type case with little airflow (that Antec is no SFF lol).
Logged

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #17 on: June 08, 2008, 05:26:12 PM »
Logged

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Will this work?
« Reply #18 on: June 09, 2008, 05:54:13 AM »
They got heatsinks, they'll be fine.
Logged
Retired Modder, minor dabbling from now on :P

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Will this work?
« Reply #19 on: June 09, 2008, 12:33:53 PM »
Awesome ok. Thanks Matt/Onii/Noah
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal