Author Topic: 900 paint job and cable management  (Read 2354 times)

Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
900 paint job and cable management
« on: June 11, 2008, 12:46:01 AM »
my old set up had been driving me crazy

old (before new desk and monitor)



so i cut, painted and cleaned








switch placement for cathodes




flipped PSU (using spray paint caps till i get my new case feet)



and that about dose it

Offline tmandt

  • Club AM VIP
  • E = MC² Mad Scientist
  • *
  • Posts: 1544
  • Post quality +1/-0
  • Gender: Male
  • o.O tOny! JDMKID
Re: 900 paint job and cable management
« Reply #1 on: June 11, 2008, 02:25:19 AM »
looks nice. wish i had my own comp. intrested in a cheap hd brand new. seagate 160 gb barracuda. pm me

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: 900 paint job and cable management
« Reply #2 on: June 11, 2008, 04:31:00 AM »
nice, i need to get to work on mine.
wheres ur psu?
and where did you get that amd fan? did that come with a amd processer or sumthing?


Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: 900 paint job and cable management
« Reply #3 on: June 11, 2008, 11:43:30 AM »
The PSU is on the bottom left of the picture, the Antec 900 has it put there, but nice job!

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: 900 paint job and cable management
« Reply #4 on: June 11, 2008, 02:36:01 PM »
Nice Job. What kind of paint did you use and how did  you mount that switch?

Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: 900 paint job and cable management
« Reply #5 on: June 11, 2008, 05:58:29 PM »
looks nice. wish i had my own comp. intrested in a cheap hd brand new. seagate 160 gb barracuda. pm me

thanks for the offer, but im done buying hard drives under 500 GB's.


nice, i need to get to work on mine.
wheres ur psu?
and where did you get that amd fan? did that come with a amd processer or sumthing?

the amd fan is the stock CPU cooler. and the PSU is in the bottom left. i flipped it so it vents down and out of the case.


Nice Job. What kind of paint did you use and how did  you mount that switch?

i used dupli-color its an automotive paint.
step
1.sand and clean
2.prime with self etching primer
3.paint with black engine enamel
(there is more to it than that but thats the over view)

as for the switch its a rocker switch that came with the cathodes i just drilled a hole for it and ran the wires.


but on to the update. i went down to mnpctech met the owner and picked up a set of feet and talked computers and modding for a bit. it was very cool.

but hear are the pics




 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal