Author Topic: Wiredinput Installation Diagrams" RapidFire Dual Triggers Old/New Board Style" (Read 65705 times)

Modded Matt · « **Reply #60 on:** September 29, 2008, 05:03:48 PM »

thanks mike, I just got the chip and it works great. great tut. I did this in about an hour. trimmed and bent all the legs over out of the way and had no problems closing the controller. I dont understand why so many people are having trouble with this. free forming the 555 was much more difficult

IRISH SMURF 300 · « **Reply #61 on:** September 30, 2008, 02:49:44 PM »

i have a question, i bought a few things off ur website and it said that i payed for them on my paypal account but when i went to my account on here it said that i didnt pay for it so i was just wondering if i really did thanks

KingMike_OS · « **Reply #62 on:** September 30, 2008, 05:34:37 PM »

what is the order name and lastname
date order and total paypal amount
items that was order

chunkyyluvr53 · « **Reply #63 on:** October 08, 2008, 02:37:49 PM »

This tutorial works for the kit that they are currently selling in the store right?

Jumbo · « **Reply #64 on:** October 09, 2008, 12:44:38 PM »

Yup, THis is the Kit to buy for this tutorial -
https://acidmods.com/ShopUSA/product_info.php?products_id=79&osCsid=46f89717267d9bfd6c37438be83d1bd8

chunkyyluvr53 · « **Reply #65 on:** October 09, 2008, 03:52:41 PM »

Yeah thats the kit i bought.. I wired it up exactly like the diagram... (matrix board/sleeper style) triple checked and it doesn't work... any suggestions?

chrssk8534 · « **Reply #66 on:** October 12, 2008, 09:05:16 PM »

hi, i had the same thing happen as irish smurf
i messaged you about it
thanks

RAP66 · « **Reply #67 on:** October 13, 2008, 03:09:09 PM »

I installed the pre-wired mod, and it does work BUT my controller now shuts on/off. I remove the mod and it works fine. Any thoughts?

KingMike_OS · « **Reply #68 on:** October 13, 2008, 10:06:04 PM »

call me when we open and i help you ..

before calling make sure the controller is apart and you ready to make changes

a picture will help if you can have one to show me ..

RAP66 · « **Reply #69 on:** October 14, 2008, 03:47:46 PM »

Quote from: KingMike_OS on October 13, 2008, 10:06:04 PM

call me when we open and i help you ..

before calling make sure the controller is apart and you ready to make changes

a picture will help if you can have one to show me ..

which I had listened... oh well... UH need to try again. I killed the controller by overheating it and pulling the pads... it's dead jim

good news though, I have another spare. Will study the images and try again.

famuskillap · « **Reply #70 on:** October 15, 2008, 03:21:26 AM »

I purchased the pre wired kit, how do I wire it so the rapid fire is only on the switches i install? i want the stock triggers to function regularly. Any help, i would like to order more parts! Thanks.

MattosTKE · « **Reply #71 on:** October 15, 2008, 08:28:54 AM »

I'm new here, is there any way to wire the three wire kit to make it dual? The way the 3 wire works now is rapid fire shots when you press the new switch on the bottom. Can you add a switch for the left trigger and have it work in this way? So whenever you press the new switches it shoots rapid fire?

KingMike_OS · « **Reply #72 on:** October 15, 2008, 12:46:01 PM »

Quote

I purchased the pre wired kit, how do I wire it so the rapid fire is only on the switches i install? i want the stock triggers to function regularly. Any help, i would like to order more parts! Thanks

Cant the kit you buy is a dual rapid fire on trigger so it will rapidfire on trigger when the switch is on and when is off the trigger is working as normal ..

now if you want it on the switch .. you need a 3 wire kit that kits is rapid fire on switch only.

Head In Jar Man · « **Reply #73 on:** October 18, 2008, 11:23:49 PM »

Great guide, but i got a quick question.
i bought just the chip from the store and im wondering how to set it up so that the buttons engage rapid fire instead of the actual triggers. Are any of the guides this setup, i have the new and old controllers. Thanx in advance.

bobobob121 · « **Reply #74 on:** October 26, 2008, 12:32:13 PM »

Alright, i want to install the sleeper rapidfire matrix mod "the one without the extra buttons". What would i need to buy in order for this.

knight787 · « **Reply #75 on:** October 27, 2008, 12:24:25 PM »

Hello KingMike_OS ,

is it possible to add an led indicator, so if i wanted to do that what pin on the chip would i solder to the negative pin of the led. I know i have seen this somewhere so was just wondering if you can maybe tell me or show.

Also thanks again for answering my questions when i had called earlier today.

Head In Jar Man · « **Reply #76 on:** November 01, 2008, 10:27:25 AM »

hey,
i sent you a message will all the info on my problem. If you could answer it as possible that would be great.

xboxbandit · « **Reply #77 on:** November 28, 2008, 12:17:41 PM »

OK I tried the no button clean install with pic chip 12F683 and the controller will connect but will not lite up led4 to turn on rapid fire..

Went step by step from pics anyone care to help me figure out what went wrong ?
Oh used hex code for that chip from this site

endorphin · « **Reply #78 on:** December 02, 2008, 01:16:03 PM »

I bought 2x prewire kits (Dual trigger) which i installed and are working fine. I also bought 3 chips and some tact switches. I installed these on the new and old board dual rapid fire on the trigger power safe mode. I can't get them to work. They just fire normaly when i have the ground wire off and with the ground wire on the board it won't fire at all????

Maybe the chips are not the right ones? I bought them from Mike (acid mod). Thanks

Shakezilla · « **Reply #79 on:** December 03, 2008, 06:50:49 PM »

Never mind the kit got put up today.

Shak3rr · « **Reply #80 on:** December 09, 2008, 03:45:17 PM »

does anyone have a diagram of the 3 mod sleeper controller?

xJudas · « **Reply #81 on:** December 27, 2008, 05:20:11 PM »

I've been having some problems with this and I don't know why. I've wired them up exactly like in the diagrams.

First I did the deadbug matrix
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2603a.jpg
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2604a.jpg
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2605a.jpg
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2606a.jpg
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2608a.jpg
The orange wire is on the right trigger, red is on the power on the left.. They look similar colour in these pics

Then I did Rapidfire on Right Trigger
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2610a.jpg
http://i86.photobucket.com/albums/k84/xportraits/mod/_MG_2618a.jpg

Either which one I do, I get absolutely no response. Is there a different power source I should use? Also, if it helps, this is the kit I ordered https://acidmods.com/ShopUSA/product_info.php?cPath=26&products_id=37

Thanks for any help

avafreak182 · « **Reply #82 on:** January 28, 2009, 05:23:18 PM »

If I only want it on the right trigger for a new style, which picture should I use?

kenoman · « **Reply #83 on:** February 14, 2009, 06:39:55 PM »

ok so i need some help whenever i try to use this on live my controller resets is it the game or my controller?

Blazinkaos · « **Reply #84 on:** February 14, 2009, 07:44:43 PM »

you sure u wired everything correctly nothing is touching or interacting with another that it shouldnt.

kenoman · « **Reply #85 on:** February 15, 2009, 12:52:38 AM »

idk i found it in my room that i got a long time ago... ill take more time tomorrow and try to get it to work properly

Blazinkaos · « **Reply #86 on:** February 15, 2009, 04:38:42 PM »

yea if you have to just desolder it and then solder it back checking it.

Dyer13 · « **Reply #87 on:** May 17, 2009, 09:01:57 AM »

Can a 12f629 be used for this instead of the 683? I was comparing the two data sheets and they are not that different except the 629 has an internal 4mHz only oscillator, while the 683 has the ability to select a frequency between 8 MHz and 31 kHz. The pinouts seem to be the same, so I was just wondering if the code needs to be changed at all. If I recall correctly (and correct me if I'm wrong), the code doesn't even utilize the clock frequencies, rather it just turns on and off pins 2 and 3 at a set speed.

khood · « **Reply #88 on:** May 22, 2009, 09:40:18 AM »

I have the the kit i need in my "cart", but when i click checkout the page just goes white, and it is fully loaded. So, i cannot purchase the kit i need! help!

Ben. · « **Reply #89 on:** May 22, 2009, 12:38:01 PM »

That s because the shop is now closed.. due to mike..

There is a whole thread about it..

Use the search..

News:

Author Topic: Wiredinput Installation Diagrams" RapidFire Dual Triggers Old/New Board Style" (Read 65705 times)

chunkyyluvr53

chunkyyluvr53