Author Topic: Official "Show off your Rapid Fire/Modded Controller" (Read 128335 times)

rafaliyo86 · « **Reply #150 on:** September 29, 2012, 06:25:20 AM »

Quote from: KingMike_OS on September 28, 2012, 09:14:47 PM

Here is a controller i did for my 4 year old son :

i did not change the A B X Y to all Yellow as His 4 and need the color Button In order to Play but that was the plan

when he get older

OMG!! How did you do that in the cases??

musttachee · « **Reply #151 on:** September 29, 2012, 05:33:45 PM »

^^^^^^^
talk about EPICNESS!!!!!!:D nice work

masterkush · « **Reply #152 on:** October 03, 2012, 01:17:44 PM »

Just got done with this, many of you may remember me from my other account but this controller is just basic , I'm running low on supplies in fact I used my last chip ,this controller has BMU 3 with burst option , thanks hazer!right now it's going on Craigslist to help support my other hobby(pocket bikes)

http://i1135.photobucket.com/albums/m632/Dwizzle031/VIDEO0019.mp4
Here's a vid^

Tenac · « **Reply #153 on:** October 15, 2012, 04:54:08 PM »

I just got back into Xbox modding after years, and I love it. Idk how alive the Xbox 360 modding community still is now a days, but it's fun.

I'm gonna re-do this symmetrical controller with more responsive buttons and I'm gonna locate them better. Other than that, it works great and was pretty easy to do. I just wish controllers were cheaper to buy, I got this one off ebay a long time ago for $6, now they're $30+

Both these have white 0603 leds in their ROL, and I'm currently cutting holes in my Halo Reach's console's side for a window and more LEDs.

Fareham dave · « **Reply #154 on:** November 29, 2012, 08:19:17 AM »

this is one of my recent controllers, it has a 3mode rf chip in it that spurgurgle gave me and it has tactiles on the bottom that replace the L3 and R3 functions from the thumbsticks. it has all blue leds in the dome, rol and trim. still need to find a good way to light up the d-pad as it has the original bottom plate on it so i cant light it up the same as in spurgs d-pad tut.

Rodent · « **Reply #155 on:** November 29, 2012, 10:32:05 AM »

Awesome looking Controller keep up the good work Fareham dave good to see new modders come on the site

spurgurgle · « **Reply #156 on:** November 29, 2012, 12:49:09 PM »

Quote from: Fareham dave on November 29, 2012, 08:19:17 AM

still need to find a good way to light up the d-pad as it has the original bottom plate on it so i cant light it up the same as in spurgs d-pad tut.

try making 4 small holes int the houseing in the front half of the case and putting 0603's in them so they shine sideways onto the d-pad.....

i did it once with 2x 3mm leds it worked ok but 4 0603s would be better

BOX · « **Reply #157 on:** December 17, 2012, 02:54:27 PM »

All have 10 mode mod

bill_klpd · « **Reply #158 on:** January 03, 2013, 03:13:45 PM »

These are my 2 modded controllers

KingMike_OS · « **Reply #159 on:** February 04, 2013, 02:29:15 PM »

My latest Work For My Son Since He Love halo 4 So Much, he just Hit SR50

How to Teach 4 year Old Tips On Halo 4

let me know what you guys Think of the Controller

nEoVaLoR · « **Reply #160 on:** February 04, 2013, 02:37:22 PM »

Quote from: KingMike_OS on February 04, 2013, 02:29:15 PM

My latest Work For My Son Since He Love halo 4 So Much, he just Hit SR50

let me know what you guys Think of the Controller

asldkfja;slkdjlaSKdfla;skdalskd;laksd

i want it

so bad

how

did you paint that yourself?

it's epic.

1TONpete · « **Reply #161 on:** February 04, 2013, 02:38:18 PM »

Great work mighty king. Chrome paints can be so hard to get right. Beautiful.

Rodent · « **Reply #162 on:** February 04, 2013, 02:38:52 PM »

Quote from: KingMike_OS on February 04, 2013, 02:29:15 PM

My latest Work For My Son Since He Love halo 4 So Much, he just Hit SR50

How to Teach 4 year Old Tips On Halo 4

let me know what you guys Think of the Controller

Like i said before Awesome Dad and bad ass controller there nice work as always!!

Hazer · « **Reply #163 on:** February 04, 2013, 06:32:54 PM »

I'm guessing you painted over a stock chrome controller with a very detailed and intricate masking job.

I am so going to do this on my next controller.

I love seeing new ideas.

Rodent · « **Reply #164 on:** February 04, 2013, 06:35:17 PM »

Quote from: Hazer on February 04, 2013, 06:32:54 PM

I'm guessing you painted over a stock chrome controller with a very detailed and intricate masking job.

I am so going to do this on my next controller.

I love seeing new ideas.

if that is your plan Hazer they make a automotive tape that is fine line so you will not get a big tape line where the edge of it will be masked off, IF i remember right its about $15 bucks a roll.

KingMike_OS · « **Reply #165 on:** February 04, 2013, 06:55:52 PM »

Quote

I'm guessing you painted over a stock chrome controller with a very detailed and intricate masking job.

I am so going to do this on my next controller.

I love seeing new ideas.

Yes that Is correct start it out as a Gold Shell and than Using the Cameo Cutter Did the Design than Cut it on Peal Paper, stick and than Primer

paint , Peal the paper and Clear Coat

Note: Do have to mess and play with the Cutting Software or it will cut out Everyhting and don;t look right

also when you cut make sure leave a bit Extra like Tabs so when the tape is cover by Primer and Paint you know where it is to Peal

http://www.afterschool.com/p/silhouette-cameo-starter-bundle-cutter-522437?site=CA&utm_source=Google&utm_medium=cpc_as&utm_term=FPS-56320&utm_campaign=GoogleAW&CAWELAID=1602887664&utm_content=pla&adtype=pla&cagpspn=pla

toadzilla · « **Reply #166 on:** February 05, 2013, 01:10:16 AM »

Quote from: KingMike_OS on February 04, 2013, 06:55:52 PM

Yes that Is correct start it out as a Gold Shell and than Using the Cameo Cutter Did the Design than Cut it on Peal Paper, stick and than Primer

paint , Peal the paper and Clear Coat

Note: Do have to mess and play with the Cutting Software or it will cut out Everyhting and don;t look right

also when you cut make sure leave a bit Extra like Tabs so when the tape is cover by Primer and Paint you know where it is to Peal

http://www.afterschool.com/p/silhouette-cameo-starter-bundle-cutter-522437?site=CA&utm_source=Google&utm_medium=cpc_as&utm_term=FPS-56320&utm_campaign=GoogleAW&CAWELAID=1602887664&utm_content=pla&adtype=pla&cagpspn=pla

<iframe width="560" height="315" src="http://www.youtube.com/embed/qwnuP3Gfc1M" frameborder="0" allowfullscreen></iframe>

you never faill to amaze me mike great ideas and i personally cant wait to get to work on my next controller once my shops builtl

Phantom · « **Reply #167 on:** February 11, 2013, 12:16:38 AM »

Bigandrewgold · « **Reply #168 on:** March 30, 2013, 11:14:37 AM »

Quote from: phantomz0 on February 11, 2013, 12:16:38 AM

what mod is that?

1TONpete · « **Reply #169 on:** March 30, 2013, 04:36:55 PM »

That looks like a viking Macro.

Phantom · « **Reply #170 on:** March 30, 2013, 05:45:16 PM »

yep its the viking macro, it pretty much plays the game for you lol

laxboy · « **Reply #171 on:** April 01, 2013, 09:33:18 AM »

well done phantom took me a few to realise what it was

1TONpete · « **Reply #172 on:** April 01, 2013, 03:32:02 PM »

phantomz0
I got some cool macro setups let me know if you want the files.

KingMike_OS · « **Reply #173 on:** April 03, 2013, 03:50:11 AM »

Godfather Xbox 360

Let me know what you guys think

KingMike_OS · « **Reply #174 on:** June 13, 2013, 07:19:00 PM »

Monster illuminating Xbox 360

ViSioNXx · « **Reply #175 on:** June 13, 2013, 07:31:40 PM »

That is pretty sick!! I want to do a NOS one. Not much a fan of Monster.

KingMike_OS · « **Reply #176 on:** June 13, 2013, 07:45:55 PM »

I get on it right away I post it once im done

ViSioNXx · « **Reply #177 on:** June 13, 2013, 08:26:38 PM »

WTF!!!! I should have kept my mouth shut lol.

I want to see asap.

laxboy · « **Reply #178 on:** June 14, 2013, 10:22:24 AM »

how mike just how you deffinitly need to share this one.

ViSioNXx · « **Reply #179 on:** June 14, 2013, 10:37:05 AM »

I think he explained it a few posts up. Something about making the design and printing/cutting it on one of his fancy machines. Check it out. It is up like 3 posts.

News:

Author Topic: Official "Show off your Rapid Fire/Modded Controller" (Read 128335 times)