Author Topic: GBlaster's New Rapid Fire Mod [Release] (Read 47917 times)

GBlaster · « **on:** October 31, 2008, 12:08:28 PM »

Well here is it, enjoy everyone. Thank you to everyone here on acidmods that has supported me for the past few weeks.

http://rapidshare.com/files/159415095/Rapid_Fire.pdf

There's the link, Enjoy!

whitetop · « **Reply #1 on:** October 31, 2008, 12:45:29 PM »

thx will try

tapdisbong · « **Reply #2 on:** October 31, 2008, 12:52:10 PM »

yayyy

getin it now will try soon. yay partyyyy!!!

EDIT: hey i was reading the guide just a quick question, do you plan on selling kits with all the parts or just buy the parts from online places. and can all the parts be purchased of ebay ?
nice tutorial

if you don't mind can you put up links to where you got the parts. thanks.

ProperBritish · « **Reply #3 on:** October 31, 2008, 01:06:29 PM »

that is a BEAUTIFUL tutorial.

well done man

SYSTEM aka (Cyberpyrot) · « **Reply #4 on:** October 31, 2008, 04:59:27 PM »

Nice tutorial man.. If you want I can host it for you as not to consume you rapid share bandwidth..

Hired Gun · « **Reply #5 on:** October 31, 2008, 05:00:13 PM »

Nice post cant wait to get the kit

GBlaster could you tell us what part number of the chip is

Cheers

LaCozTe-2028 · « **Reply #6 on:** October 31, 2008, 05:19:18 PM »

good job blaster i will get parts tomarrow since me and my friends made a party and i didnt get time to go buy them .

tapdisbong · « **Reply #7 on:** October 31, 2008, 05:21:32 PM »

can you give me the links for the parts . thanks

LaCozTe-2028 · « **Reply #8 on:** October 31, 2008, 05:33:15 PM »

Well try ebay well i dont need link's since i could get all the stuff i need at a local electronique store like timers everything or you could try radioshack

whitetop · « **Reply #9 on:** October 31, 2008, 05:38:31 PM »

my maplins store has them so im ok

tapdisbong · « **Reply #10 on:** October 31, 2008, 06:31:31 PM »

dam ebay only has the 10 and 56 k resistors. no store around me, and i don't think the radioshack has it im going to go check tom. if they don't have it would anybody mind to sell me some ?

GBlaster · « **Reply #11 on:** October 31, 2008, 06:51:28 PM »

Here are the Radioshack catalog numbers:

TLC 555 Timer: 276-1718
Electrolytic Capacitor 1.0uF: 272-996
Polyester Film Capacitor .01uF: 272-1065
10k Resistor: 271-1126
56K Resistor: No Part Number (That's why I recommended the 100 pack assortment 271-306)
Momentary Switch: 275-1571 (The best one I've used is 275-644)
NPN Transistor: 276-1617 (15 pack - recommended)

tapdisbong · « **Reply #12 on:** October 31, 2008, 07:16:56 PM »

thanks man, your a great help

MaO · « **Reply #13 on:** November 01, 2008, 05:34:03 AM »

awesome ! i'm ordering the parts right now:)

tapdisbong · « **Reply #14 on:** November 01, 2008, 05:09:56 PM »

lol radio shack suck i went to the store the stupid person on the computer like umm sorry we don't have it...... so i just ordered them of the website lolll i didn't know radio shack uses pay pal lol. the only part that was out of stock was the NPN Transistor, so i bought it of ebay i looked at the part number from radioshack and compared it can you tell me if this would work... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=150249088736&ssPageName=STRK:MEWN:IT&ih=005
thanks.

blackburn · « **Reply #15 on:** November 01, 2008, 07:42:56 PM »

im going to go out tomorrow (party tonight woot!) and go to radio shack, pick the parts up and try it on some preprinted/drilled PCB, ill post pics of my finished production

tapdisbong · « **Reply #16 on:** November 01, 2008, 07:59:04 PM »

lol you should make sure they have the parts, if not just buy online.

blackburn · « **Reply #17 on:** November 01, 2008, 08:15:20 PM »

Quote from: tapdisbong on November 01, 2008, 07:59:04 PM

lol you should make sure they have the parts, if not just buy online.

yeah im going to do like said in the tutorial, and but the 100 pack. erg i hate digging for resistors though

tapdisbong · « **Reply #18 on:** November 01, 2008, 08:44:09 PM »

if they don't have the NPN transistors at the store there not on the website to, it says there currently sold out, ebay has them i put a link in my previous post but, make sure its the rite one.

EDIT: hey GBlaster i was looking around i saw consolecustoms guide, i just want to make sure but there the same solderp points for your RF rite ? it hsows the same points for where to solder for the old style pcb, and the new style, and ds3 pcb.

GBlaster · « **Reply #19 on:** November 01, 2008, 10:02:58 PM »

Quote from: tapdisbong on November 01, 2008, 05:09:56 PM

lol radio shack suck i went to the store the stupid person on the computer like umm sorry we don't have it...... so i just ordered them of the website lolll i didn't know radio shack uses pay pal lol. the only part that was out of stock was the NPN Transistor, so i bought it of ebay i looked at the part number from radioshack and compared it can you tell me if this would work... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=150249088736&ssPageName=STRK:MEWN:IT&ih=005
thanks.

I checked it out. It seems all right, the only thing is the ones I use are switching transistors and not amplifier transistors. To be honest I'm not the greatest with circuitry, so I'm not 100% sure if there is much of a difference.

Quote from: tapdisbong on November 01, 2008, 05:09:56 PM

EDIT: hey GBlaster i was looking around i saw consolecustoms guide, i just want to make sure but there the same solderp points for your RF rite ? it hsows the same points for where to solder for the old style pcb, and the new style, and ds3 pcb.

Yeah it's based off the same points, I just used my own pictures for it instead of console customs.

tapdisbong · « **Reply #20 on:** November 01, 2008, 10:37:11 PM »

i'll just wait until i get them, if they don't work i'll have to wait until they become available on radio shack.

GBlaster · « **Reply #21 on:** November 02, 2008, 06:38:39 AM »

Please let me know how it goes! I'm always up for that kind of stuff.

I'm hoping to make the adjustable version today but I'm not sure if I'll release it formally like I released this one.

tapdisbong · « **Reply #22 on:** November 02, 2008, 06:46:11 AM »

adjustable version of the tutorial ? its already good you could use some clearer pics of the pcb and the 2 solder points, all the other soldering looks easy.

sean7341 · « **Reply #23 on:** November 02, 2008, 07:00:53 AM »

How much do parts cost?

tapdisbong · « **Reply #24 on:** November 02, 2008, 07:18:18 AM »

12$ download the guide tell you part numbers and all.

GBlaster · « **Reply #25 on:** November 02, 2008, 07:29:07 AM »

Quote from: tapdisbong on November 02, 2008, 06:46:11 AM

adjustable version of the tutorial ? its already good you could use some clearer pics of the pcb and the 2 solder points, all the other soldering looks easy.

I'll release a video of it but I won't be releasing the specs for it. It'll be adjustable between 26.7 shots/second to 5.6 shots/second. I would have really loved some clearer pictures but its just the way they came out and I was scrambling for time.

Besides for the adjustable rapid fire, I am currently working on a new mod that I think you guys will enjoy, but it's only in the idea and rapid prototyping phase right now.

Sil3ntP3nguin · « **Reply #26 on:** November 02, 2008, 07:56:37 AM »

K, i downloaded it from QJ...

Looks a but messy, I want to try to have it as clean as possible.

wonder if i should sell these as a service on ebay..

tapdisbong · « **Reply #27 on:** November 02, 2008, 03:18:40 PM »

you want me to upload some clearer pics ? i can do both for the first style pcb, and the second style pcb/ ds3 controllers.
here i took pics of the old style and the new/ds3 one and labeled the solder points. here:::

GBlaster · « **Reply #28 on:** November 02, 2008, 03:55:58 PM »

Quote from: tapdisbong on November 02, 2008, 03:18:40 PM

you want me to upload some clearer pics ? i can do both for the first style pcb, and the second style pcb/ ds3 controllers.

You can take some clearer pictures. Just send them to me trough Private message and I'll have a look.

tapdisbong · « **Reply #29 on:** November 02, 2008, 04:19:40 PM »

i just pm'ed you the pics.

News:

Author Topic: GBlaster's New Rapid Fire Mod [Release] (Read 47917 times)