Author Topic: [psp1000] ryan0's FMA psp for oliislong[psp1000]UPDATED (Read 14622 times)

treemty · « **Reply #30 on:** January 08, 2009, 04:14:09 AM »

Good Job Ryan, I am VERY sorry for your lose and I hope everything goes well with planing

LaCozTe-2028 · « **Reply #31 on:** January 08, 2009, 01:10:43 PM »

DID he make it his self with the programmer or some one els pre programed it

ryan0 · « **Reply #32 on:** January 09, 2009, 05:05:28 AM »

nope I programmed the PIC myself,I can link you guys to the project,here you go :
http://josepino.com/pic_projects/?led_chaser2
it's very simple,
I wired it up differently to the schematic on the site,I'll edit the circuit diagram to what I used,
for those that are electronically competent,remove the 1k resistor and the 5.1v zener diode,just hook it straight up,
If you want it to be hold switch activated like on that psp then replace the 10k resistor with a 1k one,remove the switch,and instead wire pin 1/4 to the ground of the hold switch.
It's pretty easy,but the wiring is like medusa's miniature identical twin,this would be damn hard to accomplish without the removal of the umd drive.

News: