Psp analog malfunctioning

[vikilla]

When i replaced my lcd screen, my analog would start malfunctioning. When I went into internet browser, the cursor would move by itself southeast, but when I put pressure on it, it would go northwest. I cleaned the analog chips, the contact, and the analog circuits. I have confirmed its either:1) There's dust in the analog, or 2) Screws are too loose or too tight. I've used joysens, and it's reduced character movement due to the analog, but not fixed it. I really need help.

[staxx]

theres a clear piece that sits on the contact points on the motherboard for the analog, check to make sure its not missing and fidget with that a bit until it works proper.

[ndru98]

If you look at your nub, there's a little clear rectangular peice.
Make sure the copper wires in it are DIRECTLY on the points.
Im pretty sure that's the problem.
Happened to me many times.

[Slim Hacker]

that happens to my slim you just learn 2 get used to it

[buickgnx]

try disasembaling the stick and make sure the parts are all connected. there's a few parts but its easy.