Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Uhm....Yeah, just good luck on that one. My hope are kinda down.for starters there's like no way to get the mem card slots on the top unless you're chopping half of the motherboard away.A new custom made aluminum case? Chyeah okay.Everything else is possible, but have you ever even modded before? Just wondering. If this is one of your first projects, DON'T do it, as it would be way out of your league(unless you're an experienced modder)And you do know that you spelled duct tape wrong in your name right?
1: yeah i meant to spell it wrong2:i think you misunderstood what i meant with the mem cards, i dont even have to touch the motherboard.3. im not talking about a solid aluminum case, i want to repaint one it to looklike aluminum using chrome paint and a smokey clear coat (my dad works at a custom paint shop.).4. yes i have modded before and you shouldn't jump to rash conclusion like that, you sound like a self-righteous !
(let me remind you all that im total noob).
1) Oh, ok lol2) What did you mean then...?3) Oh, I thought you meant make a case out of aluminum lol4) You're jumping into some harder more experienced mods. I've never seen any of your mods, so I was just asking. Did I ever say I could do this myself? No, because I can't. I was asking if you've modded before, that's all. Don't insult me .
It might work although routing the cable might be harder, there might not be enough room, etc. As for dual nub, if you're a "total noob" don't even try it... Unless you have a bunch of motherboards to spare.
i have electronic experience, just not with PSPs or any other console.
truce?
Then you're going to have a VERY hard time doing some of those. They are FAR from being beginners mods...
Yes, I agree with Jumbo 100%There is no need for the cards to be "sticking out", whether actually sticking out or flush with the top.For three reasons:1. Objects protruding from a psp is a modder no-no. Unless it looks good and you had no other choice.2. The slots are not spring loaded, so you would have to get a good grip before you could actually take them out of the slots3. You must ALWAYS transfer data using the usb cable. If you take out the cards individually and use a usb card reader then the psp will only show one memory card when you put the cards back in. Photofast should be pretty much permanent other from switching cardsDon't make modding harder than what it should beIf you want to do internal photofast, and a speaker to go with it:Get a singing birthday card from walgreens or other drug stores if they have them. They are thin, and loud. If I could provide you with a link to those type of speakers, I would.This is how I did my speaker so that photofast will fit also:1. Dremeled a hole out of the UMD door that is a little bit bigger than the metal ring.2. Placed a new ring on the door.3. Lined up the speaker from both sides of the door, Mostly from the outside so I can see if it was aligned with the ring.4. Used hot glue to hold the speaker in placeIf you do not understand what it should look like from inside, I will take a picture for you