Author Topic: PlayStation 3 led mod. (Read 2438 times)

Slim Hacker · « **on:** January 06, 2009, 09:57:29 PM »

Hey i need a voltage supply on the PS3 Motherboard so i can mod my ps3.
I need a point on the controller all so.
Any help would be appreciated.

blackburn · « **Reply #1 on:** January 10, 2009, 10:46:28 PM »

i used the Blu-Ray drive plug, its 12v, use a 470ohm resistor for LEDs

Slim Hacker · « **Reply #2 on:** January 10, 2009, 10:47:49 PM »

Tamks so much PS3 Mod is now being Planned Thank ssoo much.

blackburn · « **Reply #3 on:** January 11, 2009, 10:42:18 AM »

Tamks so much PS3 Mod is now being Planned Thank ssoo much.

yeah, no prob

aznhavok · « **Reply #4 on:** January 22, 2009, 08:05:24 AM »

i used the Blu-Ray drive plug, its 12v, use a 470ohm resistor for LEDs

didnt dat affect ur blu ray

SN!P3R · « **Reply #5 on:** January 26, 2009, 04:16:07 PM »

LEDs dont take up much voltage, so probably not.

News: