« previous next »
Pages: 1 [2]  All   Go Down

Author Topic: TRIGGER MOD OFF & ON QUESTION  (Read 16464 times)

Offline Munch

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +0/-0
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #30 on: May 01, 2007, 08:48:37 AM »
Heres my first unit
Blue and Red Leds

http://www.youtube.com/v/TxBIf5OeIxI

sorry about the quality it was done on my phone.
« Last Edit: May 01, 2007, 08:54:44 AM by Munch »
Logged
We dont need the key we will break it

Offline [HoP]

  • Ex-AcidMag
  • Granny Spanker
  • *
  • Posts: 361
  • Post quality +9/-3
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #31 on: May 02, 2007, 04:34:32 PM »
nice... grats on your mod!!!

i wish i would get my clear case in the mail, and the LED's i ordered got refunded so i had to buy them elsewhere (honk kong) will take awhile for shipping T_T
Logged

Offline ClearTranquil

  • Chief squatting Hard
  • *
  • Posts: 15
  • Post quality +0/-0
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #32 on: May 09, 2007, 07:48:42 PM »
Question:

I'm very interested in doing the Hold-switch-mod to turn on the trigger LEDs.

I was planning to go by the diagram showing the scratch and the wires added on in paint. (This one: http://www.btinternet.com/~deflection/scratched2bk2.jpg )

When the hold switch is turned on I want it to ONLY power the LEDs and not disable my other functions.

In other words....will scratching the surface like that prevent the hold function from working? (good thing in my case) I know it can be done but I'm just making sure.
« Last Edit: May 09, 2007, 07:51:09 PM by ClearTranquil »
Logged

Offline [HoP]

  • Ex-AcidMag
  • Granny Spanker
  • *
  • Posts: 361
  • Post quality +9/-3
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #33 on: May 09, 2007, 08:01:29 PM »
by scratching the trace on the mobo you will remove the functionality of the HOLD switch...



also remember:



i just cut my left index finger up with my dremel so typing is a pain...


it isnt too bad, just at that pain stage!!!
Logged

Offline Gubbo

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 71
  • Post quality +0/-0
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #34 on: May 10, 2007, 03:00:20 PM »
Hey nice work Munch.
I will definately be giving this a go.
Logged

Offline ZY

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #35 on: May 19, 2007, 03:45:24 AM »



which pic is correct?

I mean which connection is negative?
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #36 on: May 19, 2007, 08:35:47 AM »
the second pic is correct, the far right point is the proper connection...
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline noah03ark

  • E = MC² Mad Scientist
  • *
  • Posts: 1807
  • Post quality +1/-0
  • Gender: Male
  • Überm Sternenzelt richtet Gott, wie wir gerichtet
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #37 on: May 19, 2007, 08:43:29 AM »
he is right, i did the mod using the [HoP] tutorial, good job!
itworks great, and looks great too
Logged

Offline Munch

  • ½ Pint
  • *
  • Posts: 30
  • Post quality +0/-0
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #38 on: May 19, 2007, 12:20:23 PM »
just thought i would stick this in this thread for those that havent seen the video of 3
of my units done using the hold switch , i should have really stuck the vid in this thread first rather than make a new 1 so here it is.
i even end up dropping the phone camera at the end. lol

http://www.youtube.com/watch?v=BRD-kmLlMv4

hope to do the sound mod in the last 2 units i have.
Logged
We dont need the key we will break it

Offline fung0wd0d41

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #39 on: May 23, 2007, 12:03:56 PM »
Quote from: [HoP] on April 27, 2007, 02:38:24 PM
[TUT] How to make your HOLD button into a secondary switch (when in hold the switch is made)

Pros: Switch that is stock and doesnt look like it does anything special! coolness factor +5?

Cons: cant put psp on hold (wtf do people use it for anyhow, i only used it once when i first got my psp (day one of US release)@!!!!


ITEMS NEEDED:
1x PsP
10x Minutes (variable depending on skill and steps required)
1x shank/blade/razor/needle/something sharp that can scratch small surfaces
Semi-Advanced modding abilities

Here we go, if you cant get to this point without me telling you then this mod is NOT for you!!!

REMOVE YOUR POWER SWITCH CIRCUIT BOARD (also known as the []ox/\ board)

position the board like so:



disjoint the connection by scratching the trace on the board, test with multimeter to make sure you have a full break (use a soft toothbrush to clean off the board after scratching)
Example:


the top two connections are the hold switch! when in hold the connection is made and whatever you have the switch do it does!

^^ GLHF ^^


**EDIT**

LOOK AT THIS PICTURE BEFORE YOU DO ANYTHING DRASTIC:




so all i have to do is scratch the thing off and im done ?
Logged

Offline ZY

  • Fart Sniffer
  • *
  • Posts: 41
  • Post quality +0/-0
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #40 on: May 23, 2007, 09:45:33 PM »
Quote from: noah03ark on May 19, 2007, 08:43:29 AM
he is right, i did the mod using the [HoP] tutorial, good job!
itworks great, and looks great too

You said [HoP] is correct

but jrfhoutx said Munch is correct

I am so confused
Logged

Offline jrfhoutx

  • The Long-Winded One
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2582
  • Post quality +35/-8
  • Gender: Male
  • Dōmo, Konnichiwa, :censored:es...
    • Misadventures in Mediocrity and Modding
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #41 on: May 24, 2007, 09:02:14 AM »
Quote from: ZY on May 23, 2007, 09:45:33 PM
You said [HoP] is correct

but jrfhoutx said Munch is correct

I am so confused

Here is what it should look like, with an actual wire soldered to the correct point:
« Last Edit: May 24, 2007, 09:11:07 AM by jrfhoutx »
Logged
AcidMods Ninja... You won't know I'm there until you're gone...


All of these sigs are from the original acidmods sig comp...  @jrfhoutx  "No respect, no respect at all... that's the story of my life." --

Offline Poseidon04

  • ♥ Poker Champ ♠♣
  • *
  • Posts: 240
  • Post quality +0/-0
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #42 on: May 24, 2007, 09:41:43 AM »
This thread has been hella helpful!!!! I got my SHOULDER LED's installed in a TA-082 with firmware 3.3 ..... now i'm going to trade that for a TA-079 with firmware 2.5 and have at that one !!!! hahahahah THANKS GUYS your pics have helped out a lot ... I'll post pics soon

-PoSeIdOn04
Logged

Offline Nemesis

  • Millennium Poster
  • *
  • Posts: 1186
  • Post quality +0/-0
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #43 on: June 08, 2007, 09:52:40 AM »
so you just scratch that bit off and solder everything normally on the other side and it would work?
Logged

Offline erb0817

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Gender: Male
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #44 on: July 07, 2007, 08:29:53 PM »
I want to see if i understand this right.  The positive wire is soldered to the same place as in the normal mod.  The negative wire is attached to the hold switch instead of the place on the top of the power board.  Also that area is scraped off.  Is this correct?
Logged

Offline Exting001

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: TRIGGER MOD OFF AND ON/ PSP SCREEN SHOWS NOTHING
« Reply #45 on: April 09, 2008, 09:34:42 PM »
 :cry2: Can anyone help me I did the mod with hold switch and everything but when I connectd my screen and turned on the PSP THERE  was no XMB, I couldn't scroll through to any of the options, it was just blank screen with nothing on it just the background with wave, Can anyone help me please.?
Logged

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #46 on: April 09, 2008, 09:38:40 PM »
Quote from: Exting001 on April 09, 2008, 09:34:42 PM
:cry2: Can anyone help me I did the mod with hold switch and everything but when I connectd my screen and turned on the PSP THERE  was no XMB, I couldn't scroll through to any of the options, it was just blank screen with nothing on it just the background with wave, Can anyone help me please.?

please do not bump up old threds, just start a new one next time :cry2:
Logged
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Exting001

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
Re: TRIGGER MOD OFF & ON QUESTION
« Reply #47 on: April 09, 2008, 09:45:22 PM »
Quote from: Poseidon04 on May 24, 2007, 09:41:43 AM
This thread has been hella helpful!!!! I got my SHOULDER LED's installed in a TA-082 with firmware 3.3 ..... now i'm going to trade that for a TA-079 with firmware 2.5 and have at that one !!!! hahahahah THANKS GUYS your pics have helped out a lot ... I'll post pics soon

-PoSeIdOn04
Can anyone help me I did the mod with hold switch and everything but when I connectd my screen and turned on the PSP THERE  was no XMB, I couldn't scroll through to any of the options, it was just blank screen with nothing on it just the background with wave, Can anyone help me please.?
Logged
Pages: 1 [2]  All   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal