Author Topic: Ubuntu Problems  (Read 1402 times)

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Ubuntu Problems
« on: January 24, 2009, 01:27:11 PM »
I posted this here since nobody cares to look in PC software, but here it goes, either Linux suddenly is very unstable with wifi or somethine is wrong

sudo airmon-ng stop wlan1

sudo airmon-ng start wlan1 6

sudo aireplay-ng 1 -0 -a XXXXXXXXXX -h XXXXXXXXXX wlan1

(The X's are the mac addresses)

I receive "BSSID XXXXXX is on channel 6, but your chipset is on channel 1"

But if I put it on channel 6, why would it be on 1?

Ive tried everything, reinstalling ubuntu, installing a different kernel, and I cant use backtrack because they decided not to include my hardware (Which is actually very popular hardware, bit dumb?)


Hoi! Pinoy ako!

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Ubuntu Problems
« Reply #1 on: January 24, 2009, 02:10:02 PM »
Channel 6 and 1 are COMPLETELY different.
Set the command to use channel 1 instead and it should work fine. What does that do?

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: Ubuntu Problems
« Reply #2 on: January 24, 2009, 04:13:16 PM »
Channel 6 and 1 are COMPLETELY different.
Set the command to use channel 1 instead and it should work fine. What does that do?
I know, in the command "sudo airmon-ng start wlan1 6" i am setting my device to channel 6 in monitor mode


Hoi! Pinoy ako!

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Ubuntu Problems
« Reply #3 on: January 24, 2009, 06:28:22 PM »
Try it out on 1. Or try setting your hardware to channel 6.

Offline PhenomenalDesigns

  • Granny Spanker
  • *
  • Posts: 476
  • Post quality +0/-0
  • Gender: Male
Re: Ubuntu Problems
« Reply #4 on: January 25, 2009, 12:54:32 AM »
Try it out on 1. Or try setting your hardware to channel 6.
The AP is on channel 6, and I tried another AP on channel 1 with all my hardware on channel 1, same problem, and that command is setting my hardware channels

But now I have a new problem, I fixed this problem, but now my card doesnt inject (rausb0)


Hoi! Pinoy ako!

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: Ubuntu Problems
« Reply #5 on: January 25, 2009, 06:39:08 AM »
I have no clue then. Never tried any of this.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal