« previous next »
Pages: [1]   Go Down

Author Topic: 360 Controller LED mod  (Read 4277 times)

Offline avafreak182

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
360 Controller LED mod
« on: January 27, 2009, 06:49:26 PM »
How do I do it? I wanna change the green LED's on the XBOX button to blue.

Logged

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: 360 Controller LED mod
« Reply #1 on: January 27, 2009, 07:38:43 PM »
Just do an LED swap. You desolder the old LEDs and solder on new 0603 smd LEDs.
« Last Edit: January 27, 2009, 08:44:52 PM by Skullmaster »
Logged

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: 360 Controller LED mod
« Reply #2 on: January 27, 2009, 08:46:03 PM »
If you wish to do this you gotta be pretty good with an iron, or atleast used one before so you dont mess something up. The leds in there are 0603 and they are the size of an E on a dime
Logged

Offline avafreak182

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: 360 Controller LED mod
« Reply #3 on: January 27, 2009, 09:14:38 PM »
Oh I've done rapidfire mods, no LED's though. I just posted in mods for hire.
Logged

Offline treemty

  • l,,l METAL l,,l
  • Millennium Poster
  • *
  • Posts: 1231
  • Post quality +1/-0
  • Gender: Male
  • Will mod for food
    • the1337group.com
Re: 360 Controller LED mod
« Reply #4 on: January 31, 2009, 04:07:50 PM »
this should help you  :tup:
tutorial
Logged

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: 360 Controller LED mod
« Reply #5 on: February 01, 2009, 01:35:19 AM »
I just did my led swap on my controller.
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: 360 Controller LED mod
« Reply #6 on: February 06, 2009, 09:26:12 AM »
Way to go.
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: 360 Controller LED mod
« Reply #7 on: February 06, 2009, 10:03:11 AM »
I did my first set the other day, I was scared of them!!! LOL its not as bad as it looks if you can solder. they are just so small its intimidating. since then, I have done all 4 of my modded controllers
the key is to get the old ones off without dammaging the solder pad, otherwise you must get into the traces. to do this I used my 15w iron and melted the clear lens off, this makes it more flexable and warms everthing up, then heat one side and then the other, I use a slight flick motion with the iron on one side then the other, got them all off with no problems. to put the new ones on, first test the solder pads and mark all the + sides on a piece of paper, (matrix had #1,2,4 positive on top, and #3 positive was on bottom) now take the new led one at a time!!! look closely, there is a small dot (cathidode) on one side this is the negative side. set them in place and touch the iron to one side, then the other, reusing the factory solder, I then added new solder to them one just for good measure. make sure they are in the right way, they wont work if they are backwards. one of mine was slightly crooked, but its ok!!
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: 360 Controller LED mod
« Reply #8 on: February 06, 2009, 10:10:54 AM »
yea its not taht bad just take ur time not to much force. Job well done.
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: 360 Controller LED mod
« Reply #9 on: February 06, 2009, 01:40:41 PM »
two irons works good too (one for each side of the part) or if your lucky like me you can find hot tweezers....those are shiiiiizznit!  but a little pricey
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: 360 Controller LED mod
« Reply #10 on: February 09, 2009, 09:02:36 AM »
What there tweezers but they heat up.
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: 360 Controller LED mod
« Reply #11 on: February 09, 2009, 10:24:37 AM »

Oh ya buddy these are them.......they are so sweet!
Linky $180 tho, so it'd be a lot of LED swaps to pay for that
Logged

Offline Blazinkaos

  • Technology Revolution
  • Art & Theme Team
  • E = MC² Mad Scientist
  • *
  • Posts: 2259
  • Post quality +12/-0
  • Gender: Male
  • Time Passes Will You
    • ROOKIE BUILDERS DISCORD
Re: 360 Controller LED mod
« Reply #12 on: February 09, 2009, 10:44:15 AM »
ahhh man those are what i really need. omg there so expenive :sadno:.
Logged

*Thanks Modders/Friends:Ghost_Death, gr8npwrfl, Blizzrad, Kenshinffx.
*Thanks 802Chives for the Art position!
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal