Author Topic: Help with psp slim power board led swap  (Read 2690 times)

Offline redrider

  • King of the Wii-tards
  • *
  • Posts: 169
  • Post quality +0/-0
  • Gender: Male
Help with psp slim power board led swap
« on: March 15, 2009, 12:07:46 AM »
ok so im doing the swap right now(trying) and I cant seem to get them to light up..heres what i have done
1. they are both blue 0603 leds
2. soldered the neg to the neg for both
3. ran small peice of wire from the 2v led spot to both pos sides of the leds.
here is an image o edited from l0rdnic0 to show what I mean..


anyone have any ideas of what im doing wrong?
Pandora Pw3neD $ony

Offline rgarjr

  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Help with psp slim power board led swap
« Reply #1 on: March 15, 2009, 12:11:19 AM »
Got a voltmeter and measure across the leds see if you are getting the right voltage when the LEDs are suppose to be on. 

Offline redrider

  • King of the Wii-tards
  • *
  • Posts: 169
  • Post quality +0/-0
  • Gender: Male
Re: Help with psp slim power board led swap
« Reply #2 on: March 15, 2009, 12:12:37 AM »
about how much do those cost?
Pandora Pw3neD $ony

Offline hevitikku

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Gender: Male
Re: Help with psp slim power board led swap
« Reply #3 on: March 15, 2009, 03:12:39 AM »
about 5-50$

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help with psp slim power board led swap
« Reply #4 on: March 15, 2009, 09:52:18 AM »
i think lordnic0s powerboard pinout is wrong.... try 4dps pinout :)

i tried with nic0s too and i couldnt get it to work, and then i noticed 4dp's diagram is different, and everyone says it works

Sig by Kenshinffx - Thanks!

Offline redrider

  • King of the Wii-tards
  • *
  • Posts: 169
  • Post quality +0/-0
  • Gender: Male
Re: Help with psp slim power board led swap
« Reply #5 on: March 15, 2009, 02:19:23 PM »
why is it still up then lol...ok i will try 4dP's and let you know how it turns out
Pandora Pw3neD $ony

Offline redrider

  • King of the Wii-tards
  • *
  • Posts: 169
  • Post quality +0/-0
  • Gender: Male
Re: Help with psp slim power board led swap
« Reply #6 on: March 15, 2009, 06:59:55 PM »
ok just to make sure this is how it is suppose to be right?
and i am using blue leds so i don't need a resistor right?

thanks
Pandora Pw3neD $ony

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: Help with psp slim power board led swap
« Reply #7 on: March 16, 2009, 08:10:13 AM »
yep

Sig by Kenshinffx - Thanks!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal