Author Topic: HELP (Read 2467 times)

Cyk · « **on:** June 06, 2009, 12:10:50 PM »

Hello

i think my psp is :censored:ed so plz some1 needs to help me if they can

my problem was that the fuse of my backlight didnt work anymore
so i tryed to bypass it so after a while one of my attemps to bypass it
my psp suddenly shut down and when i turn it on my psp power light flashed 2 times and then shuts down

need help plz

hevitikku · « **Reply #1 on:** June 06, 2009, 01:42:55 PM »

I am not shure but i think something shorts.... Did you do any mods or just tried to bridge the fuse?

Cyk · « **Reply #2 on:** June 06, 2009, 02:45:46 PM »

no i just tryed to brigde the fuse noting els now it just wont go on

(((

bustinthejustin · « **Reply #3 on:** June 06, 2009, 02:54:38 PM »

Sounds bricked... Have you tried reflashing? Normally screwing with hardware shouldn't break it but i've heard it happen.

Slim Hacker · « **Reply #4 on:** June 06, 2009, 03:11:23 PM »

Its not brikedhes suffering from a short. post a pic of your attempt at trying to bridge the fuse it will help alot

Cyk · « **Reply #5 on:** June 06, 2009, 03:53:23 PM »

http://img23.imageshack.us/img23/5769/img0001ae.jpg
http://img192.imageshack.us/img192/5603/img0002a.jpg

2 links one is the whole psp and 1 is the fuse sorry for my bad quality in a few weeks i might have a better picture hope u can see it

hevitikku · « **Reply #6 on:** June 07, 2009, 02:49:41 AM »

Pics are pretty bad, but i think you shorted it with that huge copper area there.

Cyk · « **Reply #7 on:** June 07, 2009, 03:50:58 AM »

so any idea how to fix it?

hevitikku · « **Reply #8 on:** June 07, 2009, 10:17:09 AM »

Just try to clean it up and check that theres no solder balls or anything like that that could short it. Good luck with it. If didnt help then try to get better pics.

EliteGamer83 · « **Reply #9 on:** June 07, 2009, 11:28:29 AM »

It's just hard to see much from those pics. I too had a problem with a non-lighting backlight on a 2000. I bridged it and still nothing. So I found out I had a bad backlight. Maybe when you ere soldering and accidentally dropped a minuscule amount of excess solder somewhere on your motherboard. Just sit down and look all over and see if you seeany soldering touching anything else then the backlight fuse.

Cyk · « **Reply #10 on:** June 07, 2009, 11:32:50 AM »

there are no solder balls u see that brown bronze thing on the motherboard at the backlight fuse what is that? is it inportant? and i can have better pic in a few weeks cause i dont have the camera right now i hope u still will answer this topic

ps can some1 upload there psp inside pic like mine so i know if its normal or not cause i dont know if it needs to be there or not that solder

hevitikku · « **Reply #11 on:** June 07, 2009, 01:12:52 PM »

That that brown bronze thing, "if you mean what i think you mean" is the area witch grounds the LCD cage. So yes it is pretty important. And i found this pic on net so you could check your solder: http://img72.imageshack.us/img72/261/fusiblespspvu5gq9.jpg hope it helps.

Cyk · « **Reply #12 on:** June 07, 2009, 01:36:58 PM »

the image where the fuses are zoomed are to big i cant see whats behind it :P
damn if that bronze brown thingy is so inportant is it possible to replace? or what does it do?

hevitikku · « **Reply #13 on:** June 08, 2009, 12:37:54 AM »

http://www.eeshops.com/images/Sony-PSP-Motherboard-Replacement-Parts-TA-081.jpg theres pic without zooms...
And whats wrong with your bronze thingy?

Cyk · « **Reply #14 on:** June 08, 2009, 06:46:08 AM »

the bronze thing is a little burned of the solder

hevitikku · « **Reply #15 on:** June 08, 2009, 09:13:22 AM »

It shouldent matter if its just little burned... But if theres some solder between it and fuse or some other component, then that is possibly the thing that shorts, so check carefully is there any solder between that bronze thingy and any other component. If there is try to get it off carefully.

Cyk · « **Reply #16 on:** June 08, 2009, 09:31:36 AM »

does it matter if there is some glue on the fuse? (it was one of my attemps with glue

)

hevitikku · « **Reply #17 on:** June 08, 2009, 09:41:23 AM »

Is the fuse still there? Just try to clean the spot from glue and take the fuse off if it's still there and put a piece of wire or a blob of solder there. Here's full tut for fixing it: http://www.llamma.com/PSP/repair/PSP_fuse_repair.htm

Cyk · « **Reply #18 on:** June 08, 2009, 10:29:25 AM »

yes the fuse is still there and how can i remove the backlight fuse lol

hevitikku · « **Reply #19 on:** June 08, 2009, 10:31:56 AM »

Desolder or just scratch it off carefully with a knife.

jakxxx · « **Reply #20 on:** June 08, 2009, 10:44:51 AM »

I would suggest getting a magnifying glass and check all around where you were working. I know you think you can see everything with just your bare eyes but its a lot easier to spot bridges with a glass.

just my 2 cents

Cyk · « **Reply #21 on:** June 08, 2009, 10:55:42 AM »

thx for advice

Post Merge: June 08, 2009, 01:22:30 PM

still searching if there are any solder blobs

Post Merge: June 10, 2009, 12:44:41 PM

u know what i searched but nothing i will upload a much much better quality picture of my psp in a few weeks hope u will still reply then

News:

Author Topic: HELP (Read 2467 times)