Author Topic: Xbox 360 Worklog: JTAG Warfare (Read 11592 times)

blackburn · « **on:** October 07, 2009, 09:33:06 PM »

Reserved for pics...

UPDATE4: Case Preview Pics

UPDATE3:
I have decided to resume this project. The drive on this xbox was flashed with 1.6 but since the arrival of 1.7 (LT) has been washy, i have decided to make this a dual NAND linux box for now. I am currently dumping the NAND on the LPT port of a Pentium 3 512MB RAM box (only PC in my house that has a LPT parallel port lol) it has been dumping for 18 hours now and still has awhile to go. (512MB jasper unit) the LPT read speeds are rediculously slow. It is currently on sector 06EF3 of 07FFF blocks. More updates and pics VERY soon, as the case is finished and ill be soldering in the XD card stealth dual boot some time this weekend.

UPDATE2:
No work done today, weather was bad all day today, never got chance to paint, and with the humidity they way it is, the paint would not lay correctly. Going to be busy this weekend. Hopefully Ill have the finished product or at least new updates on Monday

UPDATE:

<a href="http://www.youtube.com/v/FFC4ViuQb34&hl=en&fs=1" target="_blank" rel="noopener noreferrer" class="bbc_link bbc_flash_disabled new_win">http://www.youtube.com/v/FFC4ViuQb34&hl=en&fs=1</a>

All I have to say is that i bought a brand new jasper MFG Date: 4/21/2009
Got home, immediately flashed the drive and disassembled it.
RoL swap to a lighter/brighter green. Error Color is Blue.
RRoD prevention added, and Heatsink added to (H)ANA chip
Mobo cage modified for better cooling
Duct mod
Case was designed, cut and prepped for paint. (Designs and Theme cant be released yet

)

More mods to come tomorrow and hopefully some pics of the case. (I really dont want to release theme, or give away pics until it's finished)

koldkiller · « **Reply #1 on:** October 08, 2009, 02:58:40 PM »

Come on please release the name D:

PspKicks316 · « **Reply #2 on:** October 08, 2009, 04:36:42 PM »

What's the RRoD prevention, duct mod, and mobo cutting you did?

koldkiller · « **Reply #3 on:** October 08, 2009, 04:46:09 PM »

Quote from: PspKicks316 on October 08, 2009, 04:36:42 PM

What's the RRoD prevention, duct mod, and mobo cutting you did?

I would love to know this too.

blackburn · « **Reply #4 on:** October 08, 2009, 05:08:53 PM »

Quote from: PspKicks316 on October 08, 2009, 04:36:42 PM

What's the RRoD prevention, duct mod, and mobo cutting you did?

Mobo CAGE not the actual mobo
Ill have pics of the duct mod in a few
RRoD prevention - took off heatsinks added AS5, removed X-Clamps, did the Team Hybrid X-Clamp replacement, lapped the heatsinks

koldkiller · « **Reply #5 on:** October 08, 2009, 05:20:31 PM »

Quote from: blackburn on October 08, 2009, 05:08:53 PM

Mobo CAGE not the actual mobo
Ill have pics of the duct mod in a few
RRoD prevention - took off heatsinks added AS5, removed X-Clamps, did the Team Hybrid X-Clamp replacement, lapped the heatsinks

Picsoritdidnthappen.

blackburn · « **Reply #6 on:** October 08, 2009, 05:38:23 PM »

Quote from: koldkiller on October 08, 2009, 05:20:31 PM

Picsoritdidnthappen.

lol trust me it DID happen X-)

PspKicks316 · « **Reply #7 on:** October 08, 2009, 06:15:23 PM »

Quote from: koldkiller on October 08, 2009, 05:20:31 PM

Picsoritdidnthappen.

Listen, whether you're trying to be noticed, get your post count up, or what...you don't need to spam. Quit it.

Quote from: blackburn on October 08, 2009, 05:08:53 PM

Mobo CAGE not the actual mobo
Ill have pics of the duct mod in a few
RRoD prevention - took off heatsinks added AS5, removed X-Clamps, did the Team Hybrid X-Clamp replacement, lapped the heatsinks

Cage, mobo, same thing...xD
Sounds good. I'd like to see this. I'll be modding a 360 or two in the upcoming months and need some more ideas ;P
Considering this is coming from you, I can't wait to see this finished. I'm sure it's gonna come out well!

Oh...and I think you're using the same fan controller as me. Haha

budgray19 · « **Reply #8 on:** October 09, 2009, 02:37:43 AM »

could u lap the processors aswell(given it would be harder) i understand why you lapped heatsinks. how rough where they

koldkiller · « **Reply #9 on:** October 09, 2009, 10:52:43 AM »

Quote from: PspKicks316 on October 08, 2009, 06:15:23 PM

Listen, whether you're trying to be noticed, get your post count up, or what...you don't need to spam. Quit it.

I am simply asking him to contribute pic's so don't just come here thinking OMG THIS GUY BE SPAMMIN MY MESSAGE BOARD. I could care less about my post count.

Will we be getting pictures anytime soon? What did you use for the fan mod?

blackburn · « **Reply #10 on:** October 09, 2009, 12:21:10 PM »

Quote from: budgray19 on October 09, 2009, 02:37:43 AM

could u lap the processors aswell(given it would be harder) i understand why you lapped heatsinks. how rough where they

you could lap the processors but they are pretty flat as they are and there are A LOT of components that I did not feel like accidentally breaking off while sanding or getting a bridge from metal dust particles and such. the heatsinks were just machined and sanded smooth, but using the sharpie test and just visual looks there were machined lines in the metal that i wanted to sand smooth for better contact with the processor. I already put the sinks back on, but Ill do a tutorial or something with some pics, with like the other 500 sets of these things I have lol

Quote from: PspKicks316

Cage, mobo, same thing...xD
Sounds good. I'd like to see this. I'll be modding a 360 or two in the upcoming months and need some more ideas ;P
Considering this is coming from you, I can't wait to see this finished. I'm sure it's gonna come out well!

Oh...and I think you're using the same fan controller as me. Haha

thanks a lot man, that means a lot to me to hear that.

and yeah lol i really like it, its a Scythe Kazemaster

PspKicks316 · « **Reply #11 on:** October 09, 2009, 01:53:10 PM »

Yeah, Sythe Kazemaster. Same that I have and plan on using for my MW2 360. Very nice controller.

Quote from: koldkiller on October 09, 2009, 10:52:43 AM

I am simply asking him to contribute pic's so don't just come here thinking OMG THIS GUY BE SPAMMIN MY MESSAGE BOARD. I could care less about my post count.

Don't back talk to me. Just be careful with your posts, that's all. Any more comments should be posted in your other thread, not in here.

blackburn · « **Reply #12 on:** October 09, 2009, 10:35:04 PM »

UPDATE2 added

budgray19 · « **Reply #13 on:** October 10, 2009, 02:01:13 AM »

yea but wouldnt lapping the pross drop temps due to less metal. idk i just figured that

blackburn · « **Reply #14 on:** October 10, 2009, 11:47:58 AM »

Quote from: budgray19 on October 10, 2009, 02:01:13 AM

yea but wouldnt lapping the pross drop temps due to less metal. idk i just figured that

no just better heat transfer the the heatsinks

blackburn · « **Reply #15 on:** October 21, 2009, 10:30:38 PM »

case finished today, waiting for clear to dry then time to cut and etch plexi. Pics tomorrow hopefully. Waiting for some parts to get here before i reassemble

Barnsey · « **Reply #16 on:** November 14, 2009, 02:07:00 PM »

pics up tomorrow :P
any idea when you'll finish this?

blackburn · « **Reply #17 on:** November 14, 2009, 03:37:02 PM »

well it was going to be finished, till all this ban wave talk started happening, waiting for Xtreme LT to come out before i even dare plugging in an ethernet cable to this xbox. but yeah i need to get pics out, ive just been busy with the damn mod-off

Barnsey · « **Reply #18 on:** November 15, 2009, 10:55:58 AM »

ah k no worries

blackburn · « **Reply #19 on:** December 04, 2009, 03:52:46 PM »

original post updated!

blackburn · « **Reply #20 on:** December 13, 2009, 05:13:52 PM »

new updates.

G.R.E.A.M · « **Reply #21 on:** December 13, 2009, 05:45:57 PM »

You "Snapped" my man. In other words this is badass. I love your paint job. Can't wait to see the finished projected!

jrfhoutx · « **Reply #22 on:** December 15, 2009, 05:53:04 PM »

killer paint job blackburn... multi-layer and a ton of masking huh?

can't wait to see the finished product...

blackburn · « **Reply #23 on:** December 15, 2009, 06:34:39 PM »

Quote from: jrfhoutx on December 15, 2009, 05:53:04 PM

killer paint job blackburn... multi-layer and a ton of masking huh?

can't wait to see the finished product...

yeah took a long time to make, couple weeks. there are 4 different greens as well as black. the modernwarfare2 symbol is in the paint, it is not sticker. there are cuts above and below it, as well as the "Grenade Danger Indicator" symbol cut on the other side. i need to take pics of the mobo chassis as well, as it has been cut for better airflow, as well as painted black with green sparkle in it. This is one of my best looking cases for xbox ive done yet. Also the top and bottom vents are painted with a "Ghost" effect. If you look at them from the front of the xbox (vertical) they are green, but if you look at the from an angle, they are black.

jrfhoutx · « **Reply #24 on:** December 15, 2009, 10:44:45 PM »

nice man, kinda hard to see the 'grenade' window but looks clean. would like to see a shot of that chassis, too.
didn't notice the ghost effect at first, but now I see what you're saying... how'd you accomplish that?

pigoesfar · « **Reply #25 on:** December 16, 2009, 11:30:02 AM »

Wow. How is that MW2 symbol not a sticker? It is so detailed. Also, what is that pic of the red board with the SD card of? Is there anyway you might do some painting and or detailed cutting methods tuts?

blackburn · « **Reply #26 on:** December 16, 2009, 08:49:00 PM »

the mw2 logo is a decal, it has just been cleared into the paint. The XD (not SD) card is being used as a second NAND chip in the xbox and the card socket was removed from one of the card readers to be used inside the xbox. I might make some tutorials later on down the road, but i dont have plans to at the moment as I am getting booked with orders, projects, and exams right now.

blackburn · « **Reply #27 on:** January 06, 2010, 08:13:50 PM »

MOre progress done today. Pics up tomorrow!

XBReboot flashed to onboard NAND while waiting for a PCB to come in, and 3 XD cards and a few other components.

DARk_ANGEL · « **Reply #28 on:** March 23, 2010, 06:52:06 PM »

cant wait to see man good job tho

News:

Author Topic: Xbox 360 Worklog: JTAG Warfare (Read 11592 times)