Author Topic: ok, here is what I need  (Read 2911 times)

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
ok, here is what I need
« on: October 12, 2009, 11:02:07 AM »
I was recently approached by a friend of mine who needs a modded controller, what he requires is kinda like rapid fire but on the A button, it would sorta if someone was constantly tapping it. Is the open source code out there capable of this, it is also preferable that the code has a single mode and off and must be sleeper. Also it cannot be activated by the pressing the A button, so as soon as the mod is turned on A must be being tapped without pressing any buttons.

So can anyone help me out with my options, the only codes I have used are hazers burnmeup2 and gameplayrf.
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: ok, here is what I need
« Reply #1 on: October 12, 2009, 11:08:46 AM »
I think the burn me up on a button, may be what your looking for, it would need to be conditioned though, the sleeper part is the hardest. I will think about this more when I get home.

Offline laxboy

  • i like airplanes
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1627
  • Post quality +12/-0
  • Gender: Male
  • CTVFD 9/11 lost but never forgotten
Re: ok, here is what I need
« Reply #2 on: October 12, 2009, 01:51:58 PM »
you could possibly use hazers open source and edit it to the speed, delete the modes that you dont need.  Then solder the chip right on to the a buttons wiring. that could work i belive

Offline phenoptix

  • Motor Mouth
  • *
  • Posts: 89
  • Post quality +2/-0
  • Acidmods User
    • Phenoptix
Re: ok, here is what I need
« Reply #3 on: October 12, 2009, 02:57:21 PM »
A bit unrelated to thread ghost but I think your sig has persuaded me to use gimp!

Offline laxboy

  • i like airplanes
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1627
  • Post quality +12/-0
  • Gender: Male
  • CTVFD 9/11 lost but never forgotten
Re: ok, here is what I need
« Reply #4 on: October 12, 2009, 04:08:41 PM »
A bit unrelated to thread ghost but I think your sig has persuaded me to use gimp!
no this is the right section

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: ok, here is what I need
« Reply #5 on: October 12, 2009, 04:15:00 PM »
i know how you can do this, i've done rf B for this gears pad
https://acidmods.com/forum/index.php?topic=33014.0
so it turns on as soon as you push the sycn button just take out the extra tactile for the rf A/B function this should work

re: i explain how to do it better here
https://acidmods.com/forum/index.php?topic=32611.0

again just leave out the extra tactiles so that it activates the rapid tap as soon as the mod is turned on.
« Last Edit: October 12, 2009, 04:17:50 PM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: ok, here is what I need
« Reply #6 on: October 12, 2009, 07:57:58 PM »
Burnmeup on a CG controller would work. Just wire the left trigger to the A instead, and change the output to low for the sleeper version. Currently the interupt routine only turn on the left trigger in mode 1, so how you want this to work depends on how many speeds you want (off being a mode itself too).
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: ok, here is what I need
« Reply #7 on: October 13, 2009, 12:38:21 AM »
thanks, I am surprised with how much help I received. All I need is one mode going as slow as about 2Hz and off. So if this controller turns out to be matrix there is no chance? It is vital that it is constantly on when mode one is active and acts as a normal A when set to mode off.     
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: ok, here is what I need
« Reply #8 on: October 13, 2009, 02:52:19 AM »
yeah mate this is only 1 speed, where im using the 4mode code but only the LEFT trigger outputs it cant change mode it just turns on and off wen i push the sync button, but with mine wen its on i use a tactile on the back to activate it. as i use it for gears chainsaw i dont want it on and activeated all the time, so this is y i have a tactile in line to the contact on B.

may i ask y do you want A activated all the time???


Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: ok, here is what I need
« Reply #9 on: October 13, 2009, 06:09:01 AM »
lol, dont get mad, just throwing this out there, but it sounds like a halo boosting pad to me.

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: ok, here is what I need
« Reply #10 on: October 13, 2009, 10:54:33 AM »
hehe, its not for me, but from what I understand having lots of custom games makes you look pro? anyway this guy is pro being the 2nd or 1st best in the country.

anyway spurgurgle, do you still have a copy of that code you could send me? or you wanting me to edit it myself?
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: ok, here is what I need
« Reply #11 on: October 13, 2009, 03:56:46 PM »
yeah i've still got a copy of it, but it's only hazer gameplayrf code with all the speed set to 10sps, you may want this slower depending on wot your using it for. and dont forget use the left trigger output for ur rf A

also ghost i noticed under your tag it say use gimp, i recently downloaded this but am having a bit of trouble hopefully i'll get my head round it!
« Last Edit: October 13, 2009, 03:59:04 PM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline laxboy

  • i like airplanes
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1627
  • Post quality +12/-0
  • Gender: Male
  • CTVFD 9/11 lost but never forgotten
Re: ok, here is what I need
« Reply #12 on: October 13, 2009, 05:48:12 PM »
when you say all the speeds you mean the speed how many modes does it have?

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: ok, here is what I need
« Reply #13 on: October 14, 2009, 03:23:55 AM »
well its hazer's 4mode code (gameplayrf) so it has 4 speeds, i set all of them to 10sps just incase it feels like changing mode without telling me and to be on the safe side,
as i only needed 1 speed set to 10sps so i thought i might aswell set them all to that.

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal