Author Topic: LED Fader Code (Read 25581 times)

spurgurgle · « **Reply #30 on:** December 30, 2009, 03:21:27 PM »

Quote from: SN!P3R on December 30, 2009, 01:41:36 PM

anyone try this on a matrix?

not yet.. but i imagine if you wanted to use this on a matrix using a swithching transistor would work the same as it does for all led mods....

or the same as it does for topps flasher code. i asked this question about the flasher and this was his responce

Quote from: t0pP8uZz on November 30, 2009, 09:55:39 AM

Use a transistor to power the PIC? Use the switched powersupply to release the mic supplys voltage?
Post Merge: November 30, 2009, 10:00:38 AM
heh sorry let me be more specific.

try this.

connect 'base' (B) of the transistor to any switched powersupply point on the controller (2v is fine) connect the fixed powersupply (mic) point to the 'collector' (C). Lastly.. connect the 'emitter' (E) to the PIC's VDD.

Should work fine

akomismo01 · « **Reply #31 on:** December 30, 2009, 06:11:30 PM »

Quote from: gamerdude767 on December 30, 2009, 09:28:49 AM

Yes it can! Follow the wiring diagram (at the very top of this page) wire your leds, place them where you want! bam led fader in psp.

thank you!..

t0pP8uZz · « **Reply #32 on:** January 01, 2010, 01:06:01 PM »

Quote from: spurgurgle on December 29, 2009, 08:35:10 AM

see i dont think this particular fader code will be able to work like the sickmods fader, due to the way the actual ROL works..... its done on some crazy PWM system im not to familar with it.

im currently avin a mess about with a rf module and this fader code and i cant get much to work..... i got the centre power light fading between red and blue when the console is on.... but nuthin like the sick mod chip..... also i think king mike is developing a fader chip for both pad and console check it out https://www.acidmods.com/forum/index.php/topic,34206.0.html

Umm can someone link me to a video/information on this sickmods chip?

Thanks!

aZiZ1 · « **Reply #33 on:** January 01, 2010, 02:35:59 PM »

http://diy.sickmods.net/Our_Products/SICKmods_Fader/About/

t0pP8uZz · « **Reply #34 on:** January 08, 2010, 04:48:09 AM »

Thanks ill take a look

blackburn · « **Reply #35 on:** January 10, 2010, 03:19:54 PM »

no, the sickmods fader controls the GND for fading while t0p's uses VCC for fading

the RoL board has a Common Anode, and uses and PWM to control the LEDs by pulsing the GND

BIMPtacular · « **Reply #36 on:** February 13, 2010, 09:33:05 AM »

Hello, I just wanted to say that I love the hex. I installed a pic with your hex in my psp to get my mod started. Here is a video of it doing it's thing. I used the slow hex with pin 7 powering the leds.

Psp fading shoulder buttons

t0pP8uZz · « **Reply #37 on:** February 13, 2010, 02:39:26 PM »

Really appriciate taking the time to post videos! Motivates me alot!

Do you mind if i put your video in the main post?

Also im working on a new customisable fader code.. its much more smoother and looks alot better.

BIMPtacular · « **Reply #38 on:** February 13, 2010, 02:56:21 PM »

Post away! Once you get the new code up and running I would love to swap the hex on mine. Thanks for putting in the overtime.

t0pP8uZz · « **Reply #39 on:** February 13, 2010, 04:04:25 PM »

Yes the new code will be customisable.. Meaning YOU can choose the speed of the fade. you can choose the LED on time and off time! and you can define a duty cycle!

Heres a demo of a basic fade. As you can see its much smoother.

Dynamic LED Fader 1

BIMPtacular · « **Reply #40 on:** February 13, 2010, 04:45:29 PM »

That is awesome. Are you writing a windows form to customize the hex?

t0pP8uZz · « **Reply #41 on:** February 13, 2010, 08:53:13 PM »

Yes, Just that exacly.

Basically im bytepatching the HEX from a Windows Based GUI program. (in C++)

I have alot in development so time is against me

BIMPtacular · « **Reply #42 on:** February 14, 2010, 08:14:37 AM »

If you need any help with basic functions of the program I'd be glad to help. I'm in school for game dev right now and I'm pretty good with c++. Of course I'm not trying to say I would know how to bytepatch your hex, but I could help laying out the window and writing some save/load/open functions and such. Only if it would help you out. Not trying to encroach on your project, just offering help.

t0pP8uZz · « **Reply #43 on:** February 14, 2010, 08:49:51 AM »

Yeah windows forms is a 2 minute job :-) Been developing in C++ for around 5 years so i should be okay, appriciate the offer though, ill be sure to let you know if i need anything!

BIMPtacular · « **Reply #44 on:** February 14, 2010, 08:58:25 AM »

Cool beans, yeah just offering. I do not have any lack of faith in your coding ability, at all. Thanks again for putting in the time to work on these great projects.

DDjusD · « **Reply #45 on:** May 03, 2010, 02:07:55 AM »

-snip-

GhoSt · « **Reply #46 on:** May 03, 2010, 02:40:01 AM »

use a switched power supply, such as the mike power. If you got matrix use a transistor to get a 3.6v switched.

DDjusD · « **Reply #47 on:** May 03, 2010, 01:20:17 PM »

-snip-

FOOKz™ · « **Reply #48 on:** May 03, 2010, 03:24:00 PM »

Quote

I wouldnt actually use resistors unless your voltage is high.

Please use resistors people, it increases the life of the chip and the LEDs. I would use a 10 Ohm resistor at minimum to drop that extra voltage so that LED's diode doesn't have to commit suicide.

Beneath · « **Reply #49 on:** August 09, 2010, 01:27:44 PM »

I would consider myself a noob in modding but when i connect all the points, the controller just turns off and the microchip gets extreamly hot. I did get it to work a few times but its just weird. Im sure its somthing simple im missing?

Modded Matt · « **Reply #50 on:** August 10, 2010, 04:06:31 AM »

you have a short somewhere or wired to the chip completly wrong

Beneath · « **Reply #51 on:** August 10, 2010, 12:55:54 PM »

Quote from: modded matt on August 10, 2010, 04:06:31 AM

you have a short somewhere or wired to the chip completly wrong

After looking at the wires, I had a short. Thanks Matt. Everything is working great.

Anonamous · « **Reply #52 on:** August 23, 2010, 08:04:51 AM »

dude, thats pure badass. Im gonna try this when i get around to doing my buttons with LED's

grizzlymodZ · « **Reply #53 on:** October 01, 2011, 07:46:39 PM »

this does NOT work for my CG controller..i have installed it correctly and everything

laxboy · « **Reply #54 on:** October 02, 2011, 06:47:58 AM »

The code is universal when it comes to controllers. it doesn't go off the controller all it needs is a forward voltage and a ground. What leds are you using?

Modded Matt · « **Reply #55 on:** October 02, 2011, 08:23:31 AM »

Quote from: grizzlymodZ on October 01, 2011, 07:46:39 PM

this does NOT work for my CG controller..i have installed it correctly and everything

post pics of your wiring.

grizzlymodZ · « **Reply #56 on:** October 07, 2011, 12:44:03 PM »

how?idk how 2 use this site that well

drummerdude · « **Reply #57 on:** October 07, 2011, 01:03:32 PM »

take a picture and upload it to a photo uploading site... i use photo bucket... then click the insert image button and put the link in there..

grizzlymodZ · « **Reply #58 on:** October 22, 2011, 07:43:07 AM »

for the leds on the controller i had 2 attach a 330ohm resistor on the VDD+ pin

skittles916 · « **Reply #59 on:** December 12, 2011, 11:33:44 PM »

Do you know where i can get the rar codes? I click on the link and Chrome says the site doesnt exits

News:

Author Topic: LED Fader Code (Read 25581 times)