Author Topic: controller modification (Read 15641 times)

Modded Matt · « **on:** February 03, 2010, 06:05:11 AM »

ok so some of you should remeber the soulshudder mod I did over the summer for a disabled gamer. (the guy I named the mod after) I have been asked to do a similar mod for another member with a game crippiling disability which will not allow full motion of the sticks and buttons. he must regrip to reach the buttons if his thumb is on the stick , and vise versa if he is on the buttons. as most of you know this would make a first person shooter very dificult.

The last mod I did and sponcered on my own because it was more of an adventure then a job. With this one he will be suplying the controller for modification. Neither I nor acidmods will accept any payment for the mod. We do so to help all people enjoy the games we love.

a work log to follow. I expect to have the controller this weekend.

today was a good day, paints still wet so it looks goofy in the pic,
it will lay flat, thats first primer coat. the stick is done, buttons are drilled,
all I have to do is install the tacts inside the button and close it up.
dont know how much more time the wife will let me work on it this weekend though.

laxboy · « **Reply #1 on:** February 03, 2010, 06:14:50 AM »

cant wait to see it matt

aZiZ1 · « **Reply #2 on:** February 03, 2010, 07:34:54 AM »

Much respect from me

F4thAcE · « **Reply #3 on:** February 04, 2010, 05:54:56 PM »

real nice of you helping the guy out. can't wait to see pics love these types of remodels

Modded Matt · « **Reply #4 on:** February 04, 2010, 06:36:51 PM »

I got the controller today. should be able to start soon.

FreeK · « **Reply #5 on:** February 04, 2010, 06:38:38 PM »

i could see this turning into a controller similar to the N64 controller with some different modifications, or even a cross (+) shaped controller with the sticks on 2 ends, and the buttons on the other 2.

im really interested in seeing what this turns into.

nice to see you doing volunteer work for the disabled video gaming community (if you want it put that way)

StoopidMunkee · « **Reply #6 on:** February 05, 2010, 08:22:44 PM »

i respect the fact you help people even when you have never met them, you sir are going to a better place in life.

toadzilla · « **Reply #7 on:** February 18, 2010, 07:20:37 PM »

good luck it should different in the end

Modded Matt · « **Reply #8 on:** February 19, 2010, 04:24:43 AM »

ok so I completed the relocation of the buttons and the stick last weekend and I will start on the shell. I have somany other projects I want to do, I need to get this done. I will get some pics of the mobo up along with pics of the shell as I do it this weekend.

FreeK · « **Reply #9 on:** February 22, 2010, 07:07:58 PM »

any updates on this since friday?

Modded Matt · « **Reply #10 on:** February 27, 2010, 06:38:33 PM »

bump 56 k warning, pics need resizing.

dedafmonteur · « **Reply #11 on:** February 28, 2010, 03:32:16 AM »

Looks cool, the white paitn looks kida bad though.....

btw, is it me or are the 4 buttons a bit of out alignment???

Modded Matt · « **Reply #12 on:** February 28, 2010, 07:24:18 AM »

you have to read the thread eveynow aand again. lol the paint in this pic is wet, all primer looks like that when first applied, it is dty now and has laid flat. as for the buttons, it is one complete assembly. they are in the same alignment as they were in the origional location.

pigoesfar · « **Reply #13 on:** February 28, 2010, 04:04:48 PM »

Wow, that looks great. Can't wait to see the finished product.

SN!P3R · « **Reply #14 on:** February 28, 2010, 04:20:44 PM »

Damn 56k

spurgurgle · « **Reply #15 on:** March 01, 2010, 01:50:56 AM »

Quote from: SN!P3R on February 28, 2010, 04:20:44 PM

Damn 56k

lol sniper....

hey matt controllers looking good... but i think

was on about the whole alignment of the ABXY buttons the whole section looks a little twisted but it could be the camera angle...... cant wait to see this project finished....

dedafmonteur · « **Reply #16 on:** March 01, 2010, 10:05:42 AM »

Yeh spur thats what i ment.

I hate english, ill talk dutch from now on..lol

Modded Matt · « **Reply #17 on:** March 19, 2010, 02:35:05 PM »

first testing. need to wire test and wire the buttons, then I will take apart again and do the final paint. placement of the buttons in the location of the analog stick was not a very time efficient mod. LOL there has been a few complications just due to the location. its hard to tell just looking at the controller, but the area where the buttons are originally placed, and the buttons them selves are sloped toward the right following the contours of the controller. for the buttons to even have a chance to fit the whole assembly had to be rotated because the buttons are now more into the slope towards the bottom of the controller. the buttons will be wired to the default locations, the button colors will be had painted, or dyed, once all my fitting, wiring and testing are done. which as you can see below, all the fitting is done I am testing and finishing the wiring next. I am very pleased with how controller molding came out.

spurgurgle · « **Reply #18 on:** March 20, 2010, 07:13:27 AM »

thats wicked matt.... looks very tidy on the front of the case. like it could be factory

Ghost In Black · « **Reply #19 on:** April 16, 2010, 09:04:27 PM »

Nice work. It must have taken quite a few hours and a good amount of planning too. All for a great cause.

Modded Matt · « **Reply #20 on:** May 01, 2010, 12:07:51 PM »

comleted:

robin1989 · « **Reply #21 on:** May 01, 2010, 02:38:57 PM »

awesome matt - great work

News:

Author Topic: controller modification (Read 15641 times)