Author Topic: Help with modding please (Read 12320 times)

VesHo · « **on:** January 07, 2011, 11:52:44 AM »

Hi everyone

I'm looking to get into making Rapid fire controllers for both the ps3 and xbox 360. I could do with a little advice though

Heres a few quick points

- I have already bought Rosin Core Solder and Kynar wire. Also some leds. Are the leds the hardest thing to do like many people say?

-I have no pics(microchips)as of yet. Where can I get the pre programmed and blank microchips at the best price?

-Is there a guide on here on how to program them and a hex code too?

-Any other place where cheap controllers can be obtained

As I said in introducing myself I hope to become very active on this Forum. Please think of me as a noob rather than a leecher

Any advice is greatly appreciated

HiddenVenom · « **Reply #1 on:** January 07, 2011, 12:00:04 PM »

You might find what you need here:

https://www.acidmods.com/forum/index.php/board,327.0.html

and here

https://www.acidmods.com/forum/index.php/board,389.0.html

VesHo · « **Reply #2 on:** January 07, 2011, 05:06:42 PM »

Quote from: HiddenVenom on January 07, 2011, 12:00:04 PM

You might find what you need here:

https://www.acidmods.com/forum/index.php/board,327.0.html

and here

https://www.acidmods.com/forum/index.php/board,389.0.html

Thanks for that

. I have a better understanding of what I need now. Where can I buy a usb powered pic programmer for a laptop? And is there anyone here that would send me the hex code for a 8 mode stealth chip?

Any noob tuturials here on how to program a pic from scatch? Also if someone could make a list of what programs i need to to this

hyper999 · « **Reply #3 on:** January 07, 2011, 05:14:23 PM »

a very good easy to use usb programmer is a pickit 2, its well worth the money imo and it will work with a laptop

for hex codes you are probably best off checking out the acidmods free code list in the open source and free code section
i recomend the flex code for 360

as for what programs you need it depends on what code you are using and what programmer you have

im not sure if there are any specific guides as the process varies some what but if you need any help just post here and myself or others will help you out

Rodent · « **Reply #4 on:** January 07, 2011, 05:16:10 PM »

Quote from: VesHo on January 07, 2011, 05:06:42 PM

Thanks for that . I have a better understanding of what I need now. Where can I buy a usb powered pic programmer for a laptop? And is there anyone here that would send me the hex code for a 8 mode stealth chip?

Any noob tuturials here on how to program a pic from scatch? Also if someone could make a list of what programs i need to to this

Heres a tut on making your own programmer that i have used when i first got started, and save money and learned alot making it myself. Thanks to the guys at AM

https://www.acidmods.com/forum/index.php/topic,22283.0.html

VesHo · « **Reply #5 on:** January 08, 2011, 11:08:47 AM »

Quote from: Rodent on January 07, 2011, 05:16:10 PM

Heres a tut on making your own programmer that i have used when i first got started, and save money and learned alot making it myself. Thanks to the guys at AM

https://www.acidmods.com/forum/index.php/topic,22283.0.html

Thanks..Is there a video on how to put it together? Is it basically just kynar wire and ohms soldered to it? What is the object in the far right that everythings connected to? Does annyone sell them premade on this forum?

FOOKz™ · « **Reply #6 on:** January 08, 2011, 11:53:18 AM »

Quote from: VesHo on January 08, 2011, 11:08:47 AM

Thanks..Is there a video on how to put it together? Is it basically just kynar wire and ohms soldered to it? What is the object in the far right that everythings connected to? Does annyone sell them premade on this forum?

I can make you a video if you really want one. ~ It needs a video.

Rodent · « **Reply #7 on:** January 08, 2011, 12:12:29 PM »

There is a step by step pictures, really its self explanitory. but i guess a video would make sence on maybe the programming part.

Famas · « **Reply #8 on:** January 08, 2011, 12:20:14 PM »

do you want some friendly advice buy a pic kit form microchip there on ebay and they use a usb port

VesHo · « **Reply #9 on:** January 08, 2011, 02:58:49 PM »

Quote from: FOOKz on January 08, 2011, 11:53:18 AM

I can make you a video if you really want one. ~ It needs a video.

Please theres no need to go to that amount of trouble for me! If you could make a fools guide on how to do it step by step that would be more than enough..Thanks very much

Post Merge: January 08, 2011, 03:05:39 PM

Quote from: Famas on January 08, 2011, 12:20:14 PM

do you want some friendly advice buy a pic kit form microchip there on ebay and they use a usb port

Thanks. Something like this that posts to Ireland http://cgi.ebay.com/PIC-Programmer-Kit-149-40-ZIF-USB-Microchip-kit2-USA-/360329434101?pt=LH_DefaultDomain_0&hash=item53e54ed3f5#ht_2436wt_958

Famas · « **Reply #10 on:** January 08, 2011, 04:03:07 PM »

here friend

http://cgi.ebay.co.uk/9-Pins-ZIF-40-Microchip-PIC-Programming-Programmer-Kit-/170581374110?pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item27b771349e

VesHo · « **Reply #11 on:** January 08, 2011, 04:29:01 PM »

Quote from: Famas on January 08, 2011, 04:03:07 PM

here friend

http://cgi.ebay.co.uk/9-Pins-ZIF-40-Microchip-PIC-Programming-Programmer-Kit-/170581374110?pt=UK_BOI_Electrical_Test_Measurement_Equipment_ET&hash=item27b771349e

Thanks but is there a Usb one for a laptop? My parents just got a new hdd in their vista desktop and I don't think they would appreciate me using it for that purpose

Is there any thing else i need to get in addition to that in hardware terms? And a list of programs please

Famas · « **Reply #12 on:** January 08, 2011, 04:35:35 PM »

pic 12f683 and winpic i think win pic is a program

VesHo · « **Reply #13 on:** January 08, 2011, 04:58:51 PM »

Quote from: Famas on January 08, 2011, 04:35:35 PM

pic 12f683 and winpic i think win pic is a program

http://cgi.ebay.ie/10-X-12F683-I-P-8-PIN-DIP-PIC-MICRO-PIC12F683-MICROCHIP-/150456469564?pt=LH_DefaultDomain_3&hash=item2307e7883c#ht_2503wt_905
Are they okay because they look different in the picture?

hyper999 · « **Reply #14 on:** January 08, 2011, 05:22:23 PM »

yes they are fine the picture is not accurate

Rodent · « **Reply #15 on:** January 09, 2011, 02:51:21 AM »

Quote from: Famas on January 08, 2011, 04:35:35 PM

pic 12f683 and winpic i think win pic is a program

Heres some links
http://www.winpic800.com/index.php?lang=en

http://www.microchip.com/

http://www.electronics-lab.com/downloads/mcu/001/index.html

Hope this helps also can google digi-key or mouser electronics for chips

Famas · « **Reply #16 on:** January 09, 2011, 05:09:17 AM »

ill also say get some dil sockets make life harder but worth it

VesHo · « **Reply #17 on:** January 09, 2011, 07:55:03 AM »

Quote from: Famas on January 09, 2011, 05:09:17 AM

ill also say get some dil sockets make life harder but worth it

umm what are they?

Famas · « **Reply #18 on:** January 09, 2011, 07:58:08 AM »

chip sockets so you can update the chip without se soldering anything

crazy-modder · « **Reply #19 on:** January 09, 2011, 07:58:52 AM »

I get all my chips from Newark.com

Famas · « **Reply #20 on:** January 09, 2011, 07:59:53 AM »

sorry crazy hes uk (ireland mate)

VesHo · « **Reply #21 on:** January 09, 2011, 09:43:52 AM »

Quote from: Famas on January 09, 2011, 07:58:08 AM

chip sockets so you can update the chip without se soldering anything

Oh so say i cant sell some chips and they have the 8 mode rapid fire. If I have the chip socket i can change them to another program like 11 mode?

Famas · « **Reply #22 on:** January 09, 2011, 09:47:40 AM »

if its the same diagram yea what codes do you have?

VesHo · « **Reply #23 on:** January 10, 2011, 11:14:42 AM »

Quote from: Famas on January 09, 2011, 09:47:40 AM

if its the same diagram yea what codes do you have?

none as of yet...do you have the codes for an 8 mode stealth? them seem to be quite popular

Famas · « **Reply #24 on:** January 10, 2011, 11:32:05 AM »

topbuzz has an 8 mode code and also crazy has a six mode

VesHo · « **Reply #25 on:** January 10, 2011, 02:34:11 PM »

Quote from: Famas on January 10, 2011, 11:32:05 AM

topbuzz has an 8 mode code and also crazy has a six mode

Do I just email them and ask for the codes?

Famas · « **Reply #26 on:** January 10, 2011, 02:50:08 PM »

hi friend ill get you the codes list hold on a tick

Post Merge: January 10, 2011, 02:51:34 PM

https://www.acidmods.com/forum/index.php/topic,37478.0.html

VesHo · « **Reply #27 on:** January 11, 2011, 09:48:39 AM »

Quote from: Famas on January 10, 2011, 02:50:08 PM

hi friend ill get you the codes list hold on a tick
Post Merge: January 10, 2011, 02:51:34 PM
https://www.acidmods.com/forum/index.php/topic,37478.0.html

Great

thanks so much! which one do you recommend for ps3 and what modes does it have? Also which one on that list is 8 mode stealth?

Famas · « **Reply #28 on:** January 11, 2011, 03:21:56 PM »

hyper 999 code is ps3 theres a couple on there topbuzz isnt stealth but mor funtional if you want a code that stealth with lots of modes there a 10 mode and a 18 mode that are stealth on this site just search it

VesHo · « **Reply #29 on:** January 12, 2011, 02:55:37 PM »

Quote from: Famas on January 11, 2011, 03:21:56 PM

hyper 999 code is ps3 theres a couple on there topbuzz isnt stealth but mor funtional if you want a code that stealth with lots of modes there a 10 mode and a 18 mode that are stealth on this site just search it

Thanks for that mate

I'd preffer the 8 mode because they are the most searched for rapid fire product. Which in your opinion is the best?

News:

Author Topic: Help with modding please (Read 12320 times)