Author Topic: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]  (Read 42989 times)

Offline FastBrad

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 65
  • Post quality +2/-1
  • Gender: Male
  • C.O.D Extraordinaire
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #30 on: March 31, 2011, 04:40:47 AM »
Thank-you, you're too kind.  I will install it soon, as I didn't use a socket on this pad.  Will let you know how it performs.  Once again, many thanks

Offline nycxbox

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +2/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #31 on: April 20, 2011, 02:49:53 PM »
IS there a way to make this fire with the right triggers and not have to use tact switches?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #32 on: April 20, 2011, 02:57:12 PM »
IS there a way to make this fire with the right triggers and not have to use tact switches?

it already does the tact switches are just used to change mode

Offline nycxbox

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +2/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #33 on: April 20, 2011, 04:34:13 PM »
it already does the tact switches are just used to change mode

Sweet - so I can just use the sync button then.. Thanks!!! Very cool I will hook it up tonight.

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #34 on: April 20, 2011, 04:38:09 PM »
Sweet - so I can just use the sync button then.. Thanks!!! Very cool I will hook it up tonight.

well no not really, you need 2 buttons, and also if you use the sync the controller will try and sync everytime you hold it to change mode

Offline nycxbox

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +2/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #35 on: April 20, 2011, 04:43:50 PM »
OH darn.. I was looking for a simple mod just for GOW2 - Hammer burst and Pistol - that's really all I need - sleeper install for CG? any recommendations?

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #36 on: April 21, 2011, 02:20:13 AM »
crazy modder's 6 mode         https://www.acidmods.com/forum/index.php/topic,34641.0.html

or

Hazer's BMU3                        https://www.acidmods.com/forum/index.php/topic,33232.0.html

Offline nycxbox

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +2/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #37 on: April 21, 2011, 10:25:56 PM »
Thanks I got them and will try them out...

Offline BoostedGTI

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #38 on: July 06, 2011, 12:10:55 AM »
Can this work on a PS3 controller with 4 tacts

Offline DC959

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #39 on: October 01, 2011, 01:24:54 AM »
i keep having problems with this hex and topfire where as soon as i turn the rapid fire on the controllers trigers just go nut and the lights flicker funny btw im using a cg2 controller

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #40 on: October 09, 2011, 04:46:04 AM »
Is it possible the chip is facing the wrong direction?
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #41 on: October 09, 2011, 11:10:29 AM »
Wish I found this earlier! Why isn't it on the AM code list?

Offline grizzlymodZ

  • Chief squatting Hard
  • *
  • Posts: 11
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #42 on: October 22, 2011, 07:29:25 AM »
best code on the list!lookin forward for more codes from u

Offline sQs

  • ½ Pint
  • *
  • Posts: 33
  • Post quality +6/-5
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #43 on: January 26, 2012, 04:17:22 PM »
Wish I found this earlier! Why isn't it on the AM code list?
Perhaps because I am not a U.S. citizen?

best code on the list!lookin forward for more codes from u
Thanks, I'm glad you liked it

[gmod]please don't double post next time a 5% warning[/gmod]
« Last Edit: January 26, 2012, 04:36:06 PM by whitetop »

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #44 on: January 27, 2012, 07:39:01 AM »
Perhaps because I am not a U.S. citizen?
Thanks, I'm glad you liked it

please don't double post next time a 5% warning
One of our best coders is british so don't worry, AM is not racist.
I think it's because it is similar to the topfire code.

Offline trust5

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #45 on: January 27, 2012, 08:06:10 AM »
I would love the source code for this :)

Offline sQs

  • ½ Pint
  • *
  • Posts: 33
  • Post quality +6/-5
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #46 on: February 08, 2012, 09:04:09 AM »
One of our best coders is british so don't worry, AM is not racist.
I think it's because it is similar to the topfire code.
The difference from topfire to this is very much, just take a look at the programmable modes and you'll know what I mean, the shots per round (3 or 5) also need some tweaks in the topfire code, I have personally used the HEX of t0pP8uZz and that is why I can assure you. But he has his deserved credit and because my idea was based on his work.

Was developing a HEX to PIC 16F688 which I intended to do with 16 modes contain perfect Activator Reload to GOW and Jitter MOD to MW, if I continue with this I will share with you, greetings.

Offline Frosty

  • Ω Allumnist Ω
  • *
  • Posts: 117
  • Post quality +2/-6
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #47 on: February 08, 2012, 03:46:52 PM »
i cant wait to see it
maybe even a dropshot :winker:
i think you may want to sell as a kit tho and not release

Offline Aggressive Mods

  • Motor Mouth
  • *
  • Posts: 76
  • Post quality +4/-3
  • Gender: Male
  • Aggressive Modz
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #48 on: February 08, 2012, 04:13:18 PM »
I have tried this one before, niceshare!  :hifive:

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #49 on: February 14, 2012, 01:30:25 PM »
i cant wait to see it
maybe even a dropshot :winker:
i think you may want to sell as a kit tho and not release
Frosty if you want a drop shot just link some diodes, resistors and a tactile button up to the B button, RT and power.

Offline FatorXZ

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #50 on: March 25, 2012, 04:42:49 PM »
Hi, I have some problems  when I tried to install this software in the Matrix controller, I have one CG1 and work perfectly, but in my Matrix, Leds has about 50% of normal light and I don't know what is happen, the original voltage is about 2v, but led normally need about 2,5v, anybody has any idea? thanks

Offline Luigus

  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +6/-3
  • Gender: Male
  • PSP-Direct Team
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #51 on: March 29, 2012, 04:52:17 AM »
Is the diodes on MATRIX install necessary? and if yes, what kind should i use, dunno if this is a noob question, havnt worked with diodes alot...

:dntknw:

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #52 on: March 29, 2012, 05:54:23 AM »
Is the diodes on MATRIX install necessary? and if yes, what kind should i use, dunno if this is a noob question, havnt worked with diodes alot...

:dntknw:
These guys specify the parts for a reason... yes you have to the diodes use  2x1N4148 diodes (matrix only)


If you click the link in the first post you will see the installation Tutorial

click here to see parts list and install just like in the first post hope this helps
https://www.acidmods.com/forum/index.php/topic,34229.0.html

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Luigus

  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +6/-3
  • Gender: Male
  • PSP-Direct Team
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #53 on: March 29, 2012, 10:45:08 AM »
These guys specify the parts for a reason... yes you have to the diodes use  2x1N4148 diodes (matrix only)


If you click the link in the first post you will see the installation Tutorial

click here to see parts list and install just like in the first post hope this helps
https://www.acidmods.com/forum/index.php/topic,34229.0.html

thanks for the help :D
didn't see the link, my bad

Offline ogro from hell

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #54 on: May 14, 2012, 11:22:42 AM »
First excuse my English.
I'm from Brazil and I have done several adaptations in my xbox 360 controls the various modes of rapid fire with the PIC12F683 microcontroller.
and I was wondering how these modes of this file that you guys posted (sQs_RapidF_2TC_ (FinalRevision))
these modes are below?
MODE 1: - Normal Fire - Gears of War 2 (Hammerburst)
MODE 2: - Normal Fire - Gears of War 2 (Pistol)
MODE 3: - Normal Fire - Modern Warfare 2
MODE 4: - 3 Shot Burst - Modern Warfare 2
MODE 5: - Normal Fire - Black Ops
MODE 6: - 4 Shot Burst - Black Ops
MODE 7: USER PROGRAMMABLE MODE Normal Cycle (Default Speed ​​# 195 for HALO Reach)
MODE 8: USER PROGRAMMABLE MODE with Duty Cycle (Default Speed ​​# 208 for Call of Duty 5)

thank you! and forgive me for my english

Offline davidxgames

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #55 on: August 22, 2012, 10:02:26 AM »
yo tambien soy de mexico gracias por el porte

I'm from mexico thanks for the carrying

Offline sQs

  • ½ Pint
  • *
  • Posts: 33
  • Post quality +6/-5
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #56 on: November 18, 2012, 12:01:01 PM »
Hi all,

Many message request me an update, i can make a little update in default speed, shooting style (like: Normal, Duty cycle, Normal with 3 Shot Burst, etc.) in modes, What speed suggest?

Reply this message with your suggestion, like example below:

MODE 1: - Duty Cycle - COD Black Ops II (Speed #192)
MODE 2: - Normal Fire - COD MW3 (Speed # 203)
MODE 3: - 3 Shot Burst - COD MW3 (LED2 22 flashing - LED3 4 flashing)
MODE 4: - Normal Fire - Battlefield 3 (Speed # 185)
MODE 5: - Normal Fire - GOW 3 (Speed # 179)
MODE 6: - Normal Fire - HALO 4 (Speed # 195)
MODE 7: USER PROGRAMMABLE MODE - Normal Cycle - COD MW2 (Default Speed ​​# 193)
MODE 8: USER PROGRAMMABLE MODE - Duty Cycle - COD Black Ops II (Default Speed ​​# 208)

You can determine the speed based in the SpeedRatesTable.pdf included in zip file or indicating the number of flashes in each LED, you can use the USER PROGRAMMABLE MODE 7 or 8 for determine speed.
« Last Edit: November 18, 2012, 12:01:38 PM by sQs »

Offline snowcolt17

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #57 on: November 18, 2012, 04:40:26 PM »
Hi all,

Many message request me an update, i can make a little update in default speed, shooting style (like: Normal, Duty cycle, Normal with 3 Shot Burst, etc.) in modes, What speed suggest?

Reply this message with your suggestion, like example below:

MODE 1: - Duty Cycle - COD Black Ops II (Speed #192)
MODE 2: - Normal Fire - COD MW3 (Speed # 203)
MODE 3: - 3 Shot Burst - COD MW3 (LED2 22 flashing - LED3 4 flashing)
MODE 4: - Normal Fire - Battlefield 3 (Speed # 185)
MODE 5: - Normal Fire - GOW 3 (Speed # 179)
MODE 6: - Normal Fire - HALO 4 (Speed # 195)
MODE 7: USER PROGRAMMABLE MODE - Normal Cycle - COD MW2 (Default Speed ​​# 193)
MODE 8: USER PROGRAMMABLE MODE - Duty Cycle - COD Black Ops II (Default Speed ​​# 208)

You can determine the speed based in the SpeedRatesTable.pdf included in zip file or indicating the number of flashes in each LED, you can use the USER PROGRAMMABLE MODE 7 or 8 for determine speed.

i like that.

be cool if this was stealth


Offline yasin

  • ½ Pint
  • *
  • Posts: 34
  • Post quality +1/-0
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #58 on: November 19, 2012, 01:45:27 AM »
Is it possible to add burst for COD Black Ops II?


EDIT:
i like that.

be cool if this was stealth

You can ask crazymodder for an update.
His 6 mode rf code is stealth.

[gmod]Please do not double post click Modify to edit post[/gmod]
« Last Edit: November 19, 2012, 03:11:03 AM by Rodent »

Offline sQs

  • ½ Pint
  • *
  • Posts: 33
  • Post quality +6/-5
  • Gender: Male
  • Acidmods User
Re: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision]
« Reply #59 on: November 19, 2012, 08:24:29 AM »
Is it possible to add burst for COD Black Ops II?

Yes thats posible, you can try what is the best speed using the programable mode 7 or 8.
My idea for now is this, that people who have used this modification may suggest a new list including the speed that they consider good, obviously must be some speed they have tried before.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal