Help with Easycap

[rafaliyo86]

Hi guys

Well I have an Easycap and I would like to know if you could help me. I record my games with this capture card and the image its good (for this caputure wich doesnt have HD and wich is very cheap) but i have one proble. When you move through the dashboard or when you are playing games, the image distorted with horizontal line.

I use a Macbook pro and videogluide. Here is a vid i have made to show it.

http://www.youtube.com/watch?v=bMxSGMGbDxc

Hope someone has this capture card and could help me

[Tym]

First problem, Easycap is a pile of junk...but now this is tricky there are 2 types Easycap and Ezcap and i have done a lot of research (well a bit  ) and i can't tell which is the fake...but you can have a play around with the settings to try and reduce the frame rate. I could get a half decent image using "Am cap" Just go ogle it.
Another point would be too make sure you have decent cables connecting your box and T.v/Laptop

Here is a video i recorded if you just play around with the settings
http://www.youtube.com/watch?v=Busk47JKUQ
That's probably the best quality you can squeeze out but too be honest if you want to make so amazing quality montages i would go for a bit of dazzle 

I really hope this helps

Here is the video link again if it didn't work  Linkhttp://www.youtube.com/watch?v=BEzUj47JKUQLink

[whitetop]

easycaps are great nothing wrong just no hd for it

the lines look like its from a wire brake ( bad wire) i had this till i changed my wires

http://www.youtube.com/watch?v=8eBsNJz5BG8

that one helped me

[FOOKz™]

i used Am cap to record my gameplay but hated the frame blur on the videos. I used pinnacle studio and a dazzle dvc 100. I moved on to a sony black magic hdmi cap card.

[rafaliyo86]

ok guys, thanks for the replies but I have a mac.... to capture I use videoglide (I have seen some videos people using easycapviewer but its for a DC60 and mine is DC60+ wich isnt supported) and I tried with MPEGStreamclip to reduce the frame rate but nothing

Before, in windows, I used to use AMCap to record, and Sony Vegas to edit and with the same cables I didnt have this problem then I think its a problem with settings.

I think if i can´t fix it I will have to star to keep some money to buy HD PVR

[whitetop]

i have the same one and i dont get that problem but i use windows easycap is not very good with 60hz just 50hz but yes you are better off getting something more updated.