Author Topic: RapidFire with pause  (Read 4981 times)

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
RapidFire with pause
« on: May 21, 2011, 10:05:51 AM »
Has anyone heard of this rapid fire with a pause mode. From what I can gather you have to hold the sync button and it flashes and turns off or pauses rapid fire. Any info on how to include this in a rapid fire hex would be appreciated.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: RapidFire with pause
« Reply #1 on: May 21, 2011, 10:15:50 AM »
please explain more.

It sounds like you are talking about a one mode sleeper.

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #2 on: May 21, 2011, 10:46:01 AM »
When i first came upon this feature I also thought it may just be one mode but is seems not as there were 5 other modes. I cant really find much other info mation, all i know is that to activate the pause mode the sync button has to be held down. sorry for being so vague.

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: RapidFire with pause
« Reply #3 on: May 21, 2011, 11:15:51 AM »
i think you mean like quick on and off maybe?

so you click the button to turn rapidfire off, but without changing mode

then you hold the button down for a couple of seconds to change the mode

like t0pfire or gameplayrf

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #4 on: May 21, 2011, 11:28:07 AM »
It is most likely similar to that but i thins the pause aspect of if it is different to the on/off somehow

Offline crazy-modder

  • Research & Development
  • Acid Modder
  • *
  • Posts: 854
  • Post quality +34/-2
  • Gender: Male
Re: RapidFire with pause
« Reply #5 on: May 21, 2011, 12:15:00 PM »
Its kinda like tops code. Your not necessarily pausing it, its just a quick on off feature. Then you can click it back to on and when you hold it down it changes to the next mode. Just a quick press of a tact will "pause/shutoff" the RF.

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #6 on: May 21, 2011, 12:45:56 PM »
The rf controller i saw with this was a sleeper

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: RapidFire with pause
« Reply #7 on: May 21, 2011, 01:00:28 PM »
can we see the ebay listing or whatever?

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #8 on: May 21, 2011, 01:03:14 PM »
well i found this function on a video, i can give you the link if that helps.

http://www.mycustomcontroller.com/MCXBoost_Rapid_Fire_Controllers_s/29.htm

first video.
In the video it refers to the rapid fire as being disengaged.
« Last Edit: May 21, 2011, 01:06:06 PM by xRaPiDzZx »

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: RapidFire with pause
« Reply #9 on: May 21, 2011, 03:12:15 PM »
yeah thats quick on/off, we don't have any codes with that exact functionality but we have 2 that are close found

here

and

here


or you could learn to code and make your own mod, but thats alot of effort


Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #10 on: May 21, 2011, 03:30:22 PM »
i was just wondering how they got the on/off function on a sleeper but thanks for your help anyway.

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: RapidFire with pause
« Reply #11 on: May 21, 2011, 03:42:00 PM »
its not wired differently its a different code the only way to get a controller like that is to buy one or rewrite their code

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: RapidFire with pause
« Reply #12 on: May 22, 2011, 08:04:37 AM »
the code looks for a 0 input on the sinc button, this tells the chip to stop the interrupt routine and return to normal mode, which is basically watching the sinc button. thats the how. but probably not what your looking for. you cant add any of this to the hex, hex is a compiled/compressed amount of source code.

well, I guess that is determined by how the source code is written.
« Last Edit: May 22, 2011, 08:05:40 AM by modded matt »

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #13 on: May 22, 2011, 09:19:08 AM »
This is probably why people ask for a 8-10 mode sleeper code because they think this feature would be available and that they wont have to cycle through all eight modes, they can just pause it.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: RapidFire with pause
« Reply #14 on: May 23, 2011, 02:36:17 PM »
still not sure your getting it. there is no damn pause. it dosnt exist, not happening. you can turn it off, and come back to the same mode you were on, but the program on the chip is still running, so the word "pause" dosnt apply.  sorry, and people who ask for 8-10 mode sleepers are just stupid.

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: RapidFire with pause
« Reply #15 on: May 23, 2011, 06:47:29 PM »
Quote
sorry, and people who ask for 8-10 mode sleepers are just stupid.

Agreed. I am begining to wonder thuough if this is a better way to make a sleeper. So, here is my thought:

You change modes by some combination: Say hold down DPAD up and tap the sync. The modes are regular RF, jitter, drop-shot, akimbo

You change pre-set speeds by holding DPAD down and tapping sync: Game 1, Game 2, adjustable, etc

You enable/disable RF by tapping sync without holding the DPAD.

I never liked stealth. But most implementations of it have been horrible. If what this poster means by 'pausing' is actualy enable/disable toggling, then it might not be a half bad idea. I dont see the value in 'stealth' installs, but others do.

I bet I could draw this up on the 12F683 some day. Not right now though. I would still make it a flex, no static speeds (ever) they would all be adjustable. Hmm, a FLEX-STEALTH design.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: RapidFire with pause
« Reply #16 on: May 24, 2011, 02:48:50 AM »
Agreed. I am begining to wonder thuough if this is a better way to make a sleeper. So, here is my thought:

You change modes by some combination: Say hold down DPAD up and tap the sync. The modes are regular RF, jitter, drop-shot, akimbo

You change pre-set speeds by holding DPAD down and tapping sync: Game 1, Game 2, adjustable, etc

You enable/disable RF by tapping sync without holding the DPAD.

I never liked stealth. But most implementations of it have been horrible. If what this poster means by 'pausing' is actualy enable/disable toggling, then it might not be a half bad idea. I dont see the value in 'stealth' installs, but others do.

I bet I could draw this up on the 12F683 some day. Not right now though. I would still make it a flex, no static speeds (ever) they would all be adjustable. Hmm, a FLEX-STEALTH design.

i also have considered this but then i remembered matrix controllers...

correct me if i'm wrong but you wouldnt be able to read the dpad on a matrix...

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: RapidFire with pause
« Reply #17 on: May 24, 2011, 03:17:21 AM »
Others cannot read the DPAD.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: RapidFire with pause
« Reply #18 on: May 24, 2011, 03:59:48 AM »
Others cannot read the DPAD.

Thought that might be the case :P could you possibly explain how one would go about it? I've wanted to have a go but haven't got/come across one yet..
My initial plan is to tap into the matrix as it were, and read the buttons like the controller does and at the same time.
« Last Edit: May 24, 2011, 04:01:29 AM by hyper999 »

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: RapidFire with pause
« Reply #19 on: May 24, 2011, 05:53:56 AM »

You change pre-set speeds by holding DPAD down and tapping sync: Game 1, Game 2, adjustable, etc

You enable/disable RF by tapping sync without holding the DPAD.



King mike had a mod chip like this, it was a sold as a PCB design.

Offline xRaPiDzZx

  • Guppy
  • *
  • Posts: 8
  • Post quality +1/-0
  • Acidmods User
Re: RapidFire with pause
« Reply #20 on: May 24, 2011, 08:21:59 AM »
i know what you mean about there being no "pause" its just on and off but an it came back to the mode you were previously on, i thought pause would be a more appropriate word. sorry for any confusion

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal