Team Xecuter RGX (inc DGX to RGX Conversion)

[Rodent]

Team Xecuter RGX (inc DGX to RGX Conversion)
March 02 2013
A few months ago we brought you DGX (Double Glitch-X) which enable the key retrieval from all slim consoles above dashboard version 15572.The DGX was the first and only hack able to do this and worked with great success, enabling the scene to continue on with it's homebrew endeavors. For some bizarre reason some outsiders are claiming that DGX was no good and that it was too slow? The fact that there was NOTHING else that could achieve the hack and the fact that there are hundreds and hundreds of pro modders posting their success stories with boot times between 5 and 30 seconds – I guess that completely went over their heads?In the last week a leaked bootloader has been passed around by sources who wish to remain anonymous which allows booting without knowing the CPU Key, enabling our DGX method to work with a single glitch (which is how normal RGH works). To use simply flash to the 360 using any RGH board. Naturally you will get the very best results using a CR3 Pro – or even a converted DGX
So this now opens two doors:

1. Compile a solid set of ECC's for standard RGH boards that can recover keys on Phat models Zephyr, Falcon, Jasper – and slim models Trinity & Corona (Both 16Mb v1/v3 and 4Gb v2/v4). The speed and performance will be no where near as good as the DGX hardware, but it will still work all the same. Much like the DGX, key recovery is a one time process anyway.

2. To design a new hack for the DGX hardware so that it can be converted to what we will now call RGX (Regular Glitch-X). As the DGX hardware has similar parts used by the high performance CR3 Pro, the DGX (RGX) can be used as a regular (or not so in this case) RGH board but much faster and better performance than any other 64 based board. In fact the only board out there that will perform better is the CR3 Pro – everything else it will just smoke. DGX R.I.P? Sure it is……

Files Included:

• RGX ECC For Zephyr, Falcon, Jasper, Trinity & Corona
• DGX to RGX XSVF Updates for Corona (3 Timing Versions)

Much more coming for DGX as well as new J-Runner and new DGX(RGX) Install guides…….

We see a lot of stores selling the DGX v1.0s & v1.1s quite cheap – I suggest you grab them while you can

Download : http://www.qfpost.com/file/d?g=uX6r8LFHG

Source: Team Xecuter

[Phantom]

here is the readme from the DGX R.I.P file that was released

    Fat and Slim
    Dubbed DGX R.I.P

    ////////////readme\\\\\\\\\\\\

    There a number of ppl behind this and they shall not be named
    Contributions in one way or another from vendors and sources.
    You know who you are. Thank You for your efforts in this.
    This puts an end to the era we know as the DGX. The product was a good idea
    and paid for itself after a few uses however not quick enough for my liking.

    Instructions
    ————-
    Dump nand
    flash approiate ecc file for your motherboard to nand
    wire a REGULAR glitch chip of your choice rgh1/rgh2 as you normally would
    retrieve key
    done

    no hours waiting and messing about with wire config..

    falcon,jasper,trinity,corona(16mb),corona(4gb) supported by these files

[Gizmo613]

Gonna try this later on today on my falcon.

[Rodent]

here is the readme from the DGX R.I.P file that was released

    Fat and Slim
    Dubbed DGX R.I.P

    ////////////readme\\\\\\\\\\\\

    There a number of ppl behind this and they shall not be named
    Contributions in one way or another from vendors and sources.
    You know who you are. Thank You for your efforts in this.
    This puts an end to the era we know as the DGX. The product was a good idea
    and paid for itself after a few uses however not quick enough for my liking.

    Instructions
    ————-
    Dump nand
    flash approiate ecc file for your motherboard to nand
    wire a REGULAR glitch chip of your choice rgh1/rgh2 as you normally would
    retrieve key
    done

    no hours waiting and messing about with wire config..

    falcon,jasper,trinity,corona(16mb),corona(4gb) supported by these files

so you flash the DGX ecc or Create ecc like normal and write the to the console like you would for any other rgh?

[3D0kassiah]

so theres no need for a dgx anymore?
from what im understanding you flash the new files to ANY glitcher and itll work the same as a dgx not quite the speed but works nonetheless
i assume im correct because the dgx dropped from 40 bucks down to 20

[Gizmo613]

The new xsvf files will turn the dgx into rgx. It will become a glitcher. Currently there's only files for corona and trinity. But yes, when you flash the custom ecc to the Nand, and boot up with any glitcher, you can recover cpu key from dash 15572 and up phat  360. The dgx is not useless, its is built with the same hardware as the cr3 pro. So it'll be faster in glitching than the current glitch board available. You don't flash anything to the glitch board except the correct/current timing files.

[Rodent]

There are files in that download for Zephyr, Falcon, and Jasper also. so just write the DGX ecc for dashboards 15574 and above?

[Gizmo613]

Those are not dgx ecc. Those ecc can be used with any glitcher available on the market. They are no way tied to only the dgx.

[Rodent]

UPDATE:

Download: DGX to RGX XSVF Conversion Files for TRINITY http://www.qfpost.com/file/d?g=CUXo4blDc

The usual merry band of Xecuter haters and accusers have typically come out of the woodwork accusing us of stealing blah blah blah. Here's the fact-correcting response to these clowns: http://team-xecuter.com/forums/showpost.php?p=732607&postcount=143


UPDATE 2:
SO……JUST TO CLARIFY!
The ability to obtain keys from dashes > 14719 and the DGX to RGX conversion are two separate things.

The ECC files are flashed to the nand (after you have 2 good dumps of them as usual) of the correspondingly named consoles (this replaces creating ECC from your nand) The console in question can be glitched using current RGH2 methods and normal CoolRunners to obtain your CPU Key (You can use CoolRunner Revs A, B, C or CR3 Lite)

In consequence of these ECC files being released, the DGX v1.0s and v1.1s are no longer required to obtain CPU Keys HOWEVER Team Xecuter have been on top of the game and allowed those people who bought a DGX to actually gain from this instead of losing out by being able to convert their DGX into the new fast booting RGX glitch chip for slims.

So lucky owners of a DGX now get a fast booting glitch chip for slims at no extra cost due to the fact that the DGX uses similar technology to the super-fast CR3 Pro. All they have to do is program the newly released RGX XSVF timing files  (Slims only – all Trinity (4 timing versions) & Corona (3 timing versions).

• The DGX/RGX is NOT essential to obtain your CPU Keys (this is what the new ECC files are for – you can use any RGH mod like a CoolRunner Rev C)
• The ECC files that we released are our own and not taken and renamed from anyone else.  Note that Xell boots to a green colored screen and we also included Zephyr.
• The new RGX XSVF Files are NOT for use by any other chips than the DGX
• The new ECC files are for dashes > 14719 to obtain CPU Key.

Source: Team Xecuter

[Gizmo613]

for those trying to access TX website here is whats on the irc chats

!! TX FORUMS BEING UPGRADED NO ETA !! Official Team Xecuter Support Channel - all old channels now in one place | RGX Conversion Pack v0.2 Coming.....

[Rodent]

for those trying to access TX website here is whats on the irc chats

!! TX FORUMS BEING UPGRADED NO ETA !! Official Team Xecuter Support Channel - all old channels now in one place | RGX Conversion Pack v0.2 Coming.....

Thanks for keeping us updated i got on this morning but then didnt check again ...

[Gizmo613]

Tx forums are back up. I dont like the looks but itll do.