Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
3Dprinting is now pretty cheap. I built my own printer for less than $400.
Interesting i would like to know more
Its an HBOT design I have been tweeking for 6 months. I have a Solidoodle 3 I used to learn the trade. You can buy kits to fully assembled printers from under $300 now a days. Here is a list of the most significant sellers:http://www.3ders.org/pricecompare/3dprinters/For super cheap, I would wait for the QU-BD one-up to become available. A very trustworthy company that has been around for alot longer than the other kickstarter companies.If you pre-assembled, Solidoodle 2 or a Robo3d would work. They are $500-$600 range. If you want a really goood printer though, the Flashforge Creator on Amazon is a $110 dual extrusion clone (with design improvements over the original) of the $2500 Makerbot Replicator.http://www.amazon.com/FlashForge-Printer-Extruder-Compatible-Volume/dp/B008CM2TCU
Very nice work. did you have to machine and fab all the parts ? most of yours looks like extruded aluminum and UHMW(Ultra-high-molecular-weight polyethylene) for the moving parts. and i am sure this wasn't a simple task trying to get it programmed to operate the way you need it to. with X Y and Z coordinates . how long does it take to make something? I know some of the stuff I use to work with could take 18 hours to 2 days depending how complicated the parts where.
Thanks for the replies guys. I have some ideas on my mind, one of them is make my "own" scuf paddles. I like this kind of controllers and I think it would be better make them with a 3d printer instead of a homemade paddle.Other cases are radio control. I have some friends who sometimes break their cars and they need to replace some plastic pieces