Before I start my endeavors, I want to check in with people who are more experienced here on Acidmods. And if all checks out, I will post a tutorial.
Like the title says, I want to enable wireless charging (or the proper term induction charging) on my PSP 3000. With the UMD drive removed, I will put the receiver behind the UMD drive door. The UMD drive door should be thin enough to make a connection, I believe the max distance needed for Qi chargers are 5mm.
I plan to use those universal receivers for android phones with the micro USB end. They output 5v/~600ma.
https://www.amazon.com/gp/product/B00YG8BT8Y/ref=od_aui_detailpages00?ie=UTF8&psc=1So my thought process for this is to just get the pin layout of the micro USB, figure out which one is =5v and which on is GND, then solder those connections to the charging terminals on the PSP's motherboard.
Does it sound simple enough or am I overlooking something? I'm pretty sure it will work, but will I still be able to charge my PSP normally with this mod installed, or will I fry something?
Thanks.
