Author Topic: xbox one controller 1537only work plugged  (Read 892 times)

Offline spitaleet

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
xbox one controller 1537only work plugged
« on: January 23, 2020, 03:39:06 PM »
Good evening.
I have this joystick on the bench with the following situation:
It works normally on cable, however, when connecting by battery, the led just flashes without synchronization, and when pressing the synchronize button, nothing happens (no lights).

I did the basic tests:
*no short on the primary regulators.
* I replaced the Q9.
*nothing heats up.
*sync button works fine on test.

Any tips?

Offline spitaleet

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: xbox one controller 1537only work plugged
« Reply #1 on: January 24, 2020, 07:48:30 AM »
Solved!
The routed of TP6 point is open, jumper it and... work  :tup:

Offline oasanshes

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: xbox one controller 1537only work plugged
« Reply #2 on: February 14, 2020, 07:20:39 AM »
I have the same problem, how did you jumper it? Thanks

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox one controller 1537only work plugged
« Reply #3 on: February 14, 2020, 05:25:24 PM »
TP6 is on the MCU board and part of the wirless circuit, no idea how that could have caused that issue.

Check and make sure L1 is on the button/power board, it can get knocked off. Also look for any cracks in the PCB.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal