« previous next »
Pages: [1]   Go Down

Author Topic: Elite controller 1698 Board short to ground  (Read 812 times)

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Elite controller 1698 Board short to ground
« on: January 03, 2021, 12:40:45 PM »
Hey guys i have a elite controller  with small holes. I wanted to replace the right  joystick due to stick drift. I  removed old one plugged new one in and it was perfect so I went ahead and soldered it in and after that  it showed that it?s pushed forward. I?ve removed it and there is some damage to the holes and   now on the middle pin of the potentiometer it shows short to ground.  Controller turns on but I hear weird noises coming from the board

Any ideas ?
Update

J2/J6 Connector Pinout
 Pin 4 is short to ground
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Elite controller 1698 Board short to ground
« Reply #1 on: January 03, 2021, 01:16:05 PM »
If J2/J6p4 is shorted to ground then the controller isn't turning on, because that is the 3.3v rail.

Separate the boards and check the Resistance again to see which one has the issue.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: Elite controller 1698 Board short to ground
« Reply #2 on: January 03, 2021, 02:14:02 PM »
 Resistance from
Middle pin to TP101  is around 1000
 I just  realized the  c23 both sides beep to ground
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Elite controller 1698 Board short to ground
« Reply #3 on: January 03, 2021, 04:14:31 PM »
The continuity setting on a meter is not the correct way to check for a short. Those things can beep even if there is hundreds of ohms of Resistance, and that's not a short.

If you suspect C23 then just remove it, it will work fine with it missing. D25 could also be causing an issue on the RSY line. Post a pic of the area there, could be some solder splash on there causing it.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: Elite controller 1698 Board short to ground
« Reply #4 on: January 03, 2021, 05:01:18 PM »
I went and removed c23 and wasn?t it. So I removed D25 as well and that solved the problem. I got connector. I installed new joystick and it wast at 0.03 on Both sides.  After solder it started acting up and it?s changing on its own.

Bad connection ??

Logged

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: Elite controller 1698 Board short to ground
« Reply #5 on: January 03, 2021, 05:03:32 PM »





I had to jump the wire and fix connection on the middle one i
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Elite controller 1698 Board short to ground
« Reply #6 on: January 03, 2021, 06:32:30 PM »
The short trace between D25 and C23 looks like it could be broken, can't really tell from that pic.
« Last Edit: January 03, 2021, 06:40:14 PM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: Elite controller 1698 Board short to ground
« Reply #7 on: January 03, 2021, 07:20:00 PM »
I re soldered everything and it seems like it?s working fine now. But I can?t manage to calibrate it less then 0.04 is that in the limits ??

I think the kit I got was a knock off or something. How I do know witch one is good quality and witch are poor quality knock off ?
Logged

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: Elite controller 1698 Board short to ground
« Reply #8 on: January 18, 2021, 09:40:40 AM »
What would make 3,3v pin on j6 Short to ground ? Also c41 seems
Like a short as well
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Elite controller 1698 Board short to ground
« Reply #9 on: January 18, 2021, 09:48:40 AM »
Lots of things could cause a short on the 3.3v rail. Find out which board has the issue first. The top board can be plugged in via USB cable and the 3.3v checked. If you know the top board to be good, then inject 3.3v into the bottom board and see what gets hot first.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Marcin_519

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: Elite controller 1698 Board short to ground
« Reply #10 on: January 18, 2021, 09:59:54 AM »
 It turns on but doesn?t get detected.  C23 gets really hot. When 2 board are connected it shows short but when separate not so I?m assuming it?s the other board.  Unfortunately I don?t have a way to inject power to it  is there any other way I can check ?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Elite controller 1698 Board short to ground
« Reply #11 on: January 18, 2021, 02:44:34 PM »
Remove the Capacitor and see if it powers up then.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal