Author Topic: JDM-001 Right stick trace damages  (Read 450 times)

Offline Qball

  • ½ Pint
  • *
  • Posts: 29
  • Post quality +0/-0
  • Acidmods User
JDM-001 Right stick trace damages
« on: July 28, 2021, 08:27:01 AM »
Hello, I was trying to replace the analog stick and damaged the trace that sends the signal of how the stick has been moved and was hoping to find out where I need to run a jumper to. https://imgur.com/a/KZn6ysD
« Last Edit: July 28, 2021, 08:28:59 AM by Qball »

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM-001 Right stick trace damages
« Reply #1 on: July 28, 2021, 01:59:16 PM »
That trace makes a straight run to right under the MCU. Just scrape some of the masking off the end of the trace there and put a jumper wire from the trace back to the center lead of the POT there.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal