« previous next »
Pages: [1]   Go Down

Author Topic: Matrix 1 controller D-pad Left, up, and analog sticks button not working  (Read 832 times)

Offline jesusma

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Matrix 1 controller D-pad Left, up, and analog sticks button not working
« on: June 01, 2022, 08:56:09 PM »
Hello amigos.

I have made a lot of investigation before this post. I have a matrix 1 wireless controller. The following buttons do not work: D-down D-up and both click button on sticks. All these buttons are from D16 and D18. According to this diagram.





Continuity is confirmed in all traces to the MCU and the resistors and caps that are in the diagram. I swap the D16 and D18 but still not working.

Any other Idea will be appreciated thank you for your time.

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Matrix 1 controller D-pad Left, up, and analog sticks button not working
« Reply #1 on: June 02, 2022, 06:16:08 PM »
Check the Orange/White trace that goes from IC1p40 to D16p3 and D18p3, suspect an open there. If that's good then IC1 is suspect.
« Last Edit: June 02, 2022, 06:21:32 PM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal