Author Topic: Wii Mod! *Progress: 50%* STILL NEED HELP!  (Read 14774 times)

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Wii Mod! *Progress: 50%* STILL NEED HELP!
« on: December 07, 2007, 08:59:50 PM »
OK so what I'm doing with my wii is:
- change the slot illumination to purple colored (HELP ME! WHAT KIND OF LEDS ARE THEY?)
- add pulseVU2 ~(DONE)~
- change wii console, wiimote and nunchuck cases replacement to black ~(DONE)~
- wiimote red led replacement ~(DONE)~
- change the color of the nunchuk attachment cord to black maybe by dye (may not be possible)
- add a jewel to the side of the wii (waiting on TimmyDX)
- get el-wire installed (need a 3.3 or around there driver/inverter, but can't find one)

So here's what my wii currently looks like:





I still need help with some of the stuff above so please help me out meanwhile.
What kind of leds are these? I want to swap them with purple but I don't know what type they are.


Thanks.
« Last Edit: February 09, 2008, 08:14:08 AM by Curoudo Sutaraifu »

Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Re: I Need Help With the Planning of My Mod!
« Reply #1 on: December 07, 2007, 09:15:13 PM »
why not make the wave bird internal? whats the point of moving it if it just in the way more, plus its way more easy then your plan  :dntknw: :dntknw:
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #2 on: December 07, 2007, 09:18:47 PM »
because of the way my entertainment area is set up, when i actually do want to use wired controllers such as dance pads i cant reach the plug. and i dont want the wii standing up because there isnt enough room for that either. haveing this way my gamecube port is also portable and my actual wii doesnt have a bunch of switches sticking out.

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: I Need Help With the Planning of My Mod!
« Reply #3 on: December 07, 2007, 11:01:05 PM »
have you seen this?  Is this where you got your idea from?
http://www.cheapassgamer.com/forums/showthread.php?t=126306

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #4 on: December 07, 2007, 11:09:27 PM »
no actually i was just talking to my friend one day and we came up with the idea because we almost pushed my wii off the table trying to reach the gamecube port. but this site should help me build the case for my design tho. thanks. but this guy used wood to build his case. im trying to find a way to make the case with plastic. if all fails i guess i'll have to use wood.

Offline PspKicks316

  • Acidmods Alumni
  • Mad Bomber
  • *
  • Posts: 5709
  • Post quality +5/-4
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #5 on: December 08, 2007, 05:02:32 AM »
To move the ports just desolder everything off the motherboard and add long wires connecting it again.To make the wavebirds internal,you won't be able to use wired anymore.But to do it, just take the casing off of the receiver and solder the corresponding leads into the the points on the gcn port.

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #6 on: December 08, 2007, 07:40:45 AM »
i have four gamecube controller extension cables, which will plug directly in to the wii and the extra cable will stay in the gamecube port case. or i can take apart a gamecube i have and use those parts. and is there absolutely no way to make the internal wavewird work and the gamecube controller at the same time? i wanna do something like this except have four receivers in the port and not the in wii. because the hole point of the port is to keep the wii clean, while using the space i have in my room in a accessible way. http://www.modpulse.com/articles/console-mods/wii-internal-wavebird-receiver-mod/
« Last Edit: December 08, 2007, 07:46:15 AM by Curoudo Sutaraifu »

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: I Need Help With the Planning of My Mod!
« Reply #7 on: December 08, 2007, 11:33:27 AM »
maybe you should get two gamecube extension cords and splice them in half and put the two input ends (where you hook up the controllers) to one output end (where you put into the wii) and have a switch you could switch between wavebird and gamecube.

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: I Need Help With the Planning of My Mod!
« Reply #8 on: December 08, 2007, 12:16:27 PM »
This way you could have it without voiding your warranty.
Retired Modder, minor dabbling from now on :P

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #9 on: December 08, 2007, 10:15:33 PM »
dslitemodder i dont exactly understand what ur suggesting. am i going to use two extensions for one controller? and mattzani i've already ruined my warranty and im also adding pulsevu2 so im not too concerned about that

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: I Need Help With the Planning of My Mod!
« Reply #10 on: December 09, 2007, 04:04:45 AM »
I mean the add one part, If it was just controller and Memory Card ports, it could be fitted without voiding your warranty!
Retired Modder, minor dabbling from now on :P

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #11 on: December 09, 2007, 07:44:42 AM »
yea, and also i wont have this portable port portable anymore if i had wires coming out from the wii into the port. btw does any1 have a gamecube microphone (or two) that i can have or buy for cheap? i need to see if i can use two of those to extend the memory card slot.

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: I Need Help With the Planning of My Mod!
« Reply #12 on: December 11, 2007, 07:30:21 PM »
dslitemodder i dont exactly understand what ur suggesting. am i going to use two extensions for one controller? and mattzani i've already ruined my warranty and im also adding pulsevu2 so im not too concerned about that
I'm saying you have one extension for TWO controllers that way you could have your wavebird and a regular controller as well (just make sure you have a switch you can change controllers)

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #13 on: December 11, 2007, 08:15:19 PM »
yea thats what i was thinking, but that means i have to rip open the extension cords, and then add a switch. doesnt that mean the switch must be a 3 legged one? and i only need one of the wires from each part right? of course the same one. like blue wire for all of them on the switch.

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: I Need Help With the Planning of My Mod!
« Reply #14 on: December 11, 2007, 09:07:55 PM »
I don't know much about wiring I just provide the ideas. Maybe somebody here can...

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #15 on: December 11, 2007, 10:00:16 PM »
ok thanks. and i still need to find out how to do that and add the player indicator leds to turn on only when the  controller is connected.  :wacko:

Offline Tri-edge

  • I found Nemo!!
  • Around the block
  • *
  • Posts: 2381
  • Post quality +4/-0
  • Gender: Male
  • Azure knight
Re: I Need Help With the Planning of My Mod!
« Reply #16 on: December 12, 2007, 05:14:36 AM »
make sure power goes to one cable at a time and that should do it

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #17 on: December 12, 2007, 07:01:06 AM »
ok i'll start this project in a week and a bit, trying to find out if its all possible first, plus i don't have all the materials. i really need a gamecube microphone! please, any1 who doesnt use theirs, donate/sell for cheap to me! also where can i get the screwdriver for the gamecube cheap?

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: I Need Help With the Planning of My Mod!
« Reply #18 on: December 12, 2007, 11:52:22 AM »
For the Tri-wing screwdriver the one that's shaped like a Y, go to dealextreme.com they have them for like 2 dollars shipped. The only thing is that it might take two weeks to get to your house because they ship from China.

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #19 on: December 12, 2007, 05:18:15 PM »
its not the tri-wing, cuz i already mod my dses and wii, but i need parts from the gamecube. i think i need a bit piece, a gamebit or sumthing. where can i get a gamebit?

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: I Need Help With the Planning of My Mod!
« Reply #20 on: December 12, 2007, 07:10:21 PM »
try dealextreme.com they have them there

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #21 on: December 12, 2007, 07:30:23 PM »
all i can find r tri-wings on this site. which i already have.the tri-wing doesnt open up gamecubes. i need something else, i hear its called a gamebit.

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: I Need Help With the Planning of My Mod!
« Reply #22 on: December 13, 2007, 12:35:47 PM »
Ok uhm lhttp://store.richspsxparts.com/4gacugabit.htm there u shud find your gamecube bit!

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #23 on: December 13, 2007, 11:10:27 PM »
thanks pinoyballa.  holy only the bit costs that much?!  :fear: i think it's cheaper on ebay because it comes with a screwdriver as well.

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: I Need Help With the Planning of My Mod!
« Reply #24 on: December 14, 2007, 11:53:54 AM »
probably, Ebay is your bestfriend for some of this stuff, because mainly stuff like that comes from China and they sell cheap!  :victory:

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #25 on: December 15, 2007, 07:40:01 AM »
yea, but the stores r in us / canada so they will still arrive fairly quickly.

EDIT: I have a question, is it possible to hook up some El-Wire to the wii on a pulsevu2? I wanna have a ring of El-Wire for the dvd drive, and a ring for my jewel.


« Last Edit: January 16, 2008, 11:56:46 AM by pinoyballa00009 »

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #26 on: January 16, 2008, 07:42:14 AM »
sorry for the double post but I have a question, is it possible to hook up some El-Wire to the wii on a pulsevu2? I wanna have a ring of El-Wire for the dvd drive, and a ring for my jewel.

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: I Need Help With the Planning of My Mod!
« Reply #27 on: January 16, 2008, 11:57:33 AM »
Umm i'm not to sure i that but i kind of don't think you will be able too. And just edit your post next time. i already fixed it for you though. 

Offline Curoudo Sutaraifu

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
Re: I Need Help With the Planning of My Mod!
« Reply #28 on: January 16, 2008, 06:35:23 PM »
thanks, yea i didn't think i could hook up el-wire either, but im jus wondering. cuz i think people have hooked them up to ps2s and xboxes.

Offline pinoyballa

  • Millennium Poster
  • *
  • Posts: 1245
  • Post quality +0/-0
Re: I Need Help With the Planning of My Mod!
« Reply #29 on: January 17, 2008, 12:00:06 PM »
they have them hooked up without the pulse chips, you could probably hook it up to the wii without the pulse chips on it

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal