Author Topic: sound reactive hold switch mod (Read 3808 times)

bormann · « **on:** December 08, 2007, 11:01:17 AM »

ok i just decided to make a new thread on how to do this.

ok so i need to no how to wire a sound reactive led on the hold switch
i no u dont need to wire to mobo becuz the pb will do that job
but were do u put the resisters, and which ones do i need?

TR4G- · « **Reply #1 on:** December 08, 2007, 11:59:37 AM »

Quote from: bormann on December 08, 2007, 11:01:17 AM

ok i just decided to make a new thread on how to do this.

ok so i need to no how to wire a sound reactive led on the hold switch
i no u dont need to wire to mobo becuz the pb will do that job
but were do u put the resisters, and which ones do i need?

do this ^^^^^, but wire to the hold switch into it on the 5v source, using the last method from teh_overlords tut:

Quote

To use the hold switch for other things:

Step 1: scratch the hold trace as shwon (this is to disable the hold function) see pic below.

Step 2: Solder One of the wires in the circuit into the first leg of the hold switch, and solder another piece of wire into the second leg.

Step 3: Solder the wire that is soldered into the second leg of the hold button into wherever it would normally go.

heres the thread, for the pic: https://www.acidmods.com/forum/index.php?topic=12139.0

****EDIT***** acutally it probly be easier to do it with the ground, beucase ull use less wireing becuase there is a ground ont he PCB, as opposed to having to take the 5v wire all the way back to the speaker area