Registering PSP

[bncplix]

My psp is 3.40 OE, it registers fine on my ps3 (just cant use it because it needs to be updated)  My brother is at 3.52 M33-4, and it had an error recognizing, i updated it to 3.72 M33 and the same thing. The USB like cant read, though when i try on a pc it reads it right away. Is it possible its the firmware causing this? Or What could be?

[MattZani]

Firmware most likely, but it may be because AFAIK you can only register one PSP at a time, but this shouldnt give you an error

[bncplix]

Firmware most likely, but it may be because AFAIK you can only register one PSP at a time, but this shouldnt give you an error

whats AFAIK mean? :o and what firmware do yo you have on your psp to use remote play (if your using at all)

[*FuFa]

whats AFAIK mean? :o and what firmware do yo you have on your psp to use remote play (if your using at all)

As Far As I Know

[MattZani]

it has to be the latest when the PS3's update came out, so really the latest, at the moment i think 3.72 is needed, but it may be 3.80.

[bncplix]

it has to be the latest when the PS3's update came out, so really the latest, at the moment i think 3.72 is needed, but it may be 3.80.

I put 3.72 M33 on my brothers and it still couldnt recongnize :/ it cant be a usb problem as it works perfectly on the pc

[lewson]

its because you have a ta-082 mobo, to downgrade it had to corrupt key 5 to get onto 1.5 fw without bricking.... fix that key and itlll work.. www.google.com