psp-gp2x f200 hybrid

[PvP_LostKnight]

this is where the triggers for the f200 and psp fps will be located underneath where my finger is positioned...




right now its alil iffy about the balance when using the analog sticks. if i put the ps2 controller handles on there, it will definitely grip and balance a whole lot better but idk if i want to sacrifice some more height on this project.

[*FuFa]

So you will pretty much hold the whole console on 2 analog sticks in the end... oh god.

[PvP_LostKnight]

if that doesnt work i either have to go with the ps2 controller or extend alittle outwards from the dpad/facebutton so itll fit the hands alil better

[FreeK]

right now its alil iffy about the balance when using the analog sticks. if i put the ps2 controller handles on there, it will definitely grip and balance a whole lot better but idk if i want to sacrifice some more height on this project.

ik what you mean, with the whole thing on the top/front, when you are using the analog it will all want to go and fall backward on you
your best bet is problly to put the ps2 handles on it, screw portability, it will be awezome

[nez]

For balance it is good but for finger placement it is kinda poor i dont know about thos analog where they are.  It is comming along but hier are still some flaws with the design 

[PvP_LostKnight]

well i want dpad with analog and facebuttons with digital analog for the psp. and also i need dpad/facebuttons for f200 so i really cant do much about the placement of it. i mean other tahn placing the analogs where the lower dpads/facebuttons are thats about it. but that will get in the way if u want to use the upper dpad/facebuttons

[Canadajames]

can you not just either wire one dpad/other side to eacother or merge them into 1 would be way better. by one imean like a whole new board or set of tactile buttons.

[PvP_LostKnight]

too much work and idk if itll fit underneath it.

[*FuFa]

too much work and idk if itll fit underneath it.

It will, now go and do it, because that other way is horrible.

[PvP_LostKnight]

i mean i could easily do the right side and put in tactile buttons underneath the facebuttons but idk how to do it to the leftside considering its ribboned

[*FuFa]

i mean i could easily do the right side and put in tactile buttons underneath the facebuttons but idk how to do it to the leftside considering its ribboned

Solder to the ribbon connectors like real men O_o

[PvP_LostKnight]

well even if i soldered tactile switches underneath the dpad and facebuttons, there is the fact that i need to wire up the 8 wires to a switch or multiple switches to switch back and forth. first off no way am i going to use 8 switches for all 8 buttons. and im not sure where to find a micro 8 lead 3-way switch

[nez]

too much work i say forget that just keep it the way you had it .