Author Topic: My New PSP Mods :) (Read 18985 times)

psp_nl · « **Reply #30 on:** January 17, 2008, 09:11:06 AM »

PSP + waterproof = sweet....
Imagine playing it underwater at a pool!

nez · « **Reply #31 on:** January 17, 2008, 12:38:42 PM »

Quote from: Siggen on January 17, 2008, 03:51:49 AM

I don't think you understand the concept of energy, "Energy is converted from one form to another, but it is never created or destroyed." Where would you get the power from, a magical moving ball inside a casing? You could buy a kinetic power supply, but then you would have to sake your psp to charge it... i think your to lacy to shake it for 4hours none stop, to get 30min playtime. none the less it would be hard to fit the kinetic psu
Other option could be to capture the heat of your hands... you wont be able to get a small enough PSU into the psp, and the capturing module would look ugly and bulky on the psp. and the problem is, that you might get 5 min more play time out of 2hours playing...

You do need to charge your PSP, or els everyone would get free electric power the rest of their life, the only thing that would work is an external solar charger, that would be just as time consuming to do as to use the regular charger, and even slower charging, and you would only be able to do it on a sunny day with clear skies...

If you have some magical way to create power, tell me i want free power!!!
Els abandon that mod

True man it would take too much room to even do that mod and wouldnt even make much of a diff. it was a great idea if it could be done.

Canadajames · « **Reply #32 on:** January 17, 2008, 12:44:41 PM »

i like the idea of a crank powered psp charge method i think ill tackle it someday and waterproof it too it would be like the rugged psp or something. sick ideas. would also have to make it camo lol.

nez · « **Reply #33 on:** January 17, 2008, 12:48:51 PM »

cranking it would be bulky and a pain i whould not like it. too chessy
water prof on the other hand i love the idea. he should just make a soft silcon covering .

ra1n · « **Reply #34 on:** January 17, 2008, 01:20:59 PM »

maybe you could get some kind of water sealant and cover the psp parts in it

nez · « **Reply #35 on:** January 17, 2008, 09:47:36 PM »

it will go under water but you cant use it.

Siggen · « **Reply #36 on:** January 18, 2008, 01:18:53 AM »

PSP + clear plastic bag with waterproof lid = waterproof
any other way would be to risky, you could brush silicone on all the electric parts, but the charging would be a mess, not to mention the battery.
waterproofing the case would be to risky IMO, and it could end up looking horrible.

good luck i suppose

Tec_ · « **Reply #37 on:** January 18, 2008, 06:49:05 AM »

ive seen at a electronics, robotics, packaging, and medical expo a company that applied a coting of some type (i cant remember what it was might have been Teflon) to PCB's the could control the thickness of what they applied to the number of atoms and what it did was basically water proof the electronics. they had a little lcd display siting in a tank of water running ads on it at there display. but what they mainly did was coat medical electronics that would have to be put in side people. they also did it for electronics that were exposed to adverse weather conditions so that they would not corrode. ill see if i cant fined the brochure i got from them

newton3010 · « **Reply #38 on:** January 18, 2008, 09:36:10 AM »

to Me all of that looks to be waiting on the USBHosts program to grow, alot of what you have there looks to be a matter of having the PSP control another device...

Dazzerr-- · « **Reply #39 on:** January 18, 2008, 10:13:08 AM »

There is loads of views on this! i think the title has been misinterperated. try be more specific next time...

nez · « **Reply #40 on:** January 18, 2008, 11:32:33 AM »

ya now that you mention that their is a product like tethlon used for electrical made to waterproof electronics i remeber seeing it at one of the conventions last year. I think i seen it at one of the constuction ones or it could of been the home show. Man i was going to go to CES this year but i couldnt get in touch cousins girlfriend. her mom work at the convention center i get to go in to show free all the time. bumber

ra1n · « **Reply #41 on:** January 18, 2008, 01:17:12 PM »

Quote from: gameking21 on January 17, 2008, 09:47:36 PM

it will go under water but you cant use it.

the point is waterproof

Siggen · « **Reply #42 on:** January 18, 2008, 04:33:44 PM »

Quote from: Dazzerr-- on January 18, 2008, 10:13:08 AM

There is loads of views on this! i think the title has been misinterperated. try be more specific next time...

just think of all the noob's believing he will actually fit a dvd tray on the psp and make it work. The PSP does not even know how to playback dvd formated movies. And about the psx gamez, you know you have to convert them to eboot's right?

a tip to PSPotential, not everything works by just applying duct-tape

ra1n · « **Reply #43 on:** January 18, 2008, 05:18:32 PM »

Quote from: Siggen on January 18, 2008, 04:33:44 PM

just think of all the noob's believing he will actually fit a dvd tray on the psp and make it work. The PSP does not even know how to playback dvd formated movies. And about the psx gamez, you know you have to convert them to eboot's right?

a tip to PSPotential, not everything works by just applying duct-tape

he has a good point

Siggen · « **Reply #44 on:** January 18, 2008, 05:45:27 PM »

water circulating through the PSP.....
ops i dropped my PSP, ops the water broke..

darn i have to get a new PSP, oh well [/sarcastic]

PSPotential · « **Reply #45 on:** January 19, 2008, 02:10:00 AM »

Quote from: Siggen on January 18, 2008, 04:33:44 PM

just think of all the noob's believing he will actually fit a dvd tray on the psp and make it work. The PSP does not even know how to playback dvd formated movies. And about the psx gamez, you know you have to convert them to eboot's right?

a tip to PSPotential, not everything works by just applying duct-tape

DUDE! I'm Just Brainstorming Ideas! Get Off My Back! These Are Only Things That I Have Thought Up.
And By The Way All - PSP Water Pumping - In Progress!
Do You Know How Tough The Tubing Is? And I Will Be Gluing The Tubing To The Pump... Duhh!

GhoSt · « **Reply #46 on:** January 19, 2008, 06:37:58 PM »

when u get some of these going r u going to post tuts?

PSPotential · « **Reply #47 on:** January 20, 2008, 02:25:18 AM »

Possibly, But Not For A While.

redryno1221 · « **Reply #48 on:** January 21, 2008, 10:00:06 AM »

Quote from: PSPotential on January 15, 2008, 01:46:14 PM

My Short List Of PSP Mods That I Have Brainstormed. As Far As I'm Aware Have Not Been Executed.

1.Self Charging PSP - Everyone See http://www.gcsescience.com/pme23.htm for how the concept would work.
2.The SonBox - Sony PSP Wireless To A Xbox / 360 Controller
3.Water Pumping Round The PSP - Maybe To Be Set Up To BE Watercooling (Mainly Just To Look Wicked)
4.Built In Fingerprint Scanner - PSP Only Powers Up Once Finger Has Been Applied To Scanner
5.Self Heating / Cooling PSP - When Its Hot The PSP Cools, When Its Cold It Warms Up - Nice On The Fingers That Way.
6.Voice Activated PSP
7.DVD Playing PSP - Straight From Disc
8.PSX PSP - PSP Which Plays PSX Discs
9.Waterproof PSP - Always Wanted To Play In The Shower...

Any Feedback? Please Let Me Know
If It's Any Good I May Try To Execute A Few Of These...

Thanks!

1. I doubt it'll work
2.that may take alot of work/experience
3.the psp does not get that hot(even if it does just cut the umd door and put a cpu fan)
4.again alot of work and experience
5.the psp doesn't get that hot or cold
6.again you'll need exp and patience
7.WHY???
8.have you heard of CFW???
9.Not practicle (how much time do you really spend in the shower

greendragonslim · « **Reply #49 on:** January 27, 2008, 12:42:29 AM »

I know a awesome solution instead of a transformer....solar power...you could put the panels on the top psp where the L and R is. It obviously won't work at night though lol. I could maybe photo shop what I mean...yea, I'll post it in a second. I don't know the technical parts to it though because I haven't done any mods to my psp aside from firmware.

here is my concept of where the panels could go

aliander · « **Reply #50 on:** January 27, 2008, 06:28:33 AM »

Hey there!

Gathering free energy to charge the PSP some kind of cool idea

Well, there are to types that probably would do work:

1. the easiest one is some mixture of orgon gathering and "frequency catching"

here the principle:
take a isolated metal square as a + pole and connect it with a ground. you'll get some current out of it.

why?
I think mostly through electro magnetic waves coming from devices. But maybe also some orgonic thing is behind this. cause the isolater-metal combination is also used in orgon-accumulators to gather orgon energy...

2. well ok... don't know how to build this one

but I saw something that was driven by an static magnet.
Could work something like this:
get 1 spoil and 1 condensator. just connect them, so they will charge each other alternatingly (well, suppose that there will be losses)
now put a magnet on the spoil, so you hype the magnetic field produced from the spoil and get more current out of it, when breaking down.
This round it would work (maybe just produced by some kind of lorentz force), but I don't know what will happen the next round charging the spoil and building up a magnetic field. how much influence does the magnet has? etc...

Also on the vid I saw some kind of magnet driven cuircut it got really shaky after some time...

next and important question: how much does the psp battery rely on stable, static voltage/current input?
what happens when you charge it with 2V instead of 5V?
well, the current wouldn't take much impact I think...

well, with the first method you wouldn't get that much out of it, that you could play non stop I think. But just put it somewhere while sleeping and it's kind of recharged would be great

and in the backplate behind the umd door there would be enough space to put such an isolated plate for energy gathering...

so... ok
does anyone know how to stabilize this voltage?
I just thought of some kind of condensator charging and through that charge the battery...
but I'm not that good in electrical engineering...

hope for good ideas

bye
Ali

dennisrr · « **Reply #51 on:** January 29, 2008, 03:09:10 AM »

All those ideas sound awesome.
Wish they would actually happen though. o.O

skyscraper · « **Reply #52 on:** January 17, 2009, 02:53:27 PM »

defenitly the biometric scanner. and if you could make it auto power on after the correct print was scanned that would be sweet. leave the power/ hold switch to do more important tasks

00G · « **Reply #53 on:** January 17, 2009, 09:56:31 PM »

An air transformer could charge the PSP, also using radio waves that are cooking us from cell phones to AM-FM radio broadcasts... There is also a natural occurring frequency coming from everywhere, but... Anyway, just like RFID scanners and stuff, the air transformer can charge the PSP just by being near a high frequency power source and the circuit is very simple and easily found on the web. Cool ideas, would be nice to see them implemented...

treemty · « **Reply #54 on:** January 17, 2009, 10:44:06 PM »

wow,
uber bumperage
please don't bump old topics, mainly @ skyscraper
look at the year, lol 2008 not 2009

Markolise · « **Reply #55 on:** January 19, 2009, 08:01:29 AM »

I'm liking the ideas.
The water pumping sounds awesome, and maybe use a small deal of oil and water so that its easier to see.
I also have been working on a way to get the PSP to self charge, I am using a slightly different approach. If I can get it working I'll write a Tutorial on it. if not then it becomes vapor wear lol

Kudos for all the nifty Ideas

4dP · « **Reply #56 on:** January 19, 2009, 09:20:22 AM »

Quote from: Markolise on January 19, 2009, 08:01:29 AM

I'm liking the ideas.
The water pumping sounds awesome, and maybe use a small deal of oil and water so that its easier to see.
I also have been working on a way to get the PSP to self charge, I am using a slightly different approach. If I can get it working I'll write a Tutorial on it. if not then it becomes vapor wear lol

Kudos for all the nifty Ideas

http://golden-shellback.com/index.html

Markolise · « **Reply #57 on:** January 19, 2009, 09:41:00 AM »

Quote from: 4dP on January 19, 2009, 09:20:22 AM

http://golden-shellback.com/index.html

That sucks the quality and the price for that water proofing just doesn't work to well. There is hardly a guarantee that it will even work lol.

News:

Author Topic: My New PSP Mods :) (Read 18985 times)