Author Topic: Trigger Mod doesnt work  (Read 1944 times)

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Trigger Mod doesnt work
« on: January 17, 2008, 06:28:49 PM »
I did the trigger mod exactly how the diagram shows. I soldered the positive to the part where u scratch the paint off and the negative to the end of the resistor on the powerboard. When I turn on the psp, the lights do not turn on. The psp turns on fine. What did i do wrong?
+~~~~~~[resistor]~~~~~~~~~[LED]~~~~~~~~-
                           \~~~~~~~~~[LED]~~~~~~~~-

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: Trigger Mod doesnt work
« Reply #1 on: January 17, 2008, 06:31:07 PM »
I did the trigger mod exactly how the diagram shows. I soldered the positive to the part where u scratch the paint off and the negative to the end of the resistor on the powerboard. When I turn on the psp, the lights do not turn on. The psp turns on fine. What did i do wrong?
+~~~~~~[resistor]~~~~~~~~~[LED]~~~~~~~~-
                           \~~~~~~~~~[LED]~~~~~~~~-


Are you sure you're LEDs are the right way around?

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: Trigger Mod doesnt work
« Reply #2 on: January 17, 2008, 06:37:51 PM »
Yea. Im pretty sure i have them the right way.....  positive [|-] negative
EDIT: NVM I just took out the resistor and now it works  :tup: .
I think my resistors are wrong. accidently bought 10 ohm SMD resistor.
« Last Edit: January 17, 2008, 08:22:10 PM by psp339 »

Offline platinumc

  • E = MC²
  • *
  • Posts: 317
  • Post quality +0/-0
Re: Trigger Mod doesnt work
« Reply #3 on: January 19, 2008, 08:57:37 AM »
you need to use 10 ohm resistors lol :D


Offline psp339

  • Millennium Poster
  • *
  • Posts: 1371
  • Post quality +0/-0
  • Gender: Male
Re: Trigger Mod doesnt work
« Reply #4 on: January 19, 2008, 09:58:54 AM »
I read that you can use without resistors. It worked then stopped working so i gave up. I took it out and now the power and charge LED doesnt work. What happened?

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Trigger Mod doesnt work
« Reply #5 on: January 19, 2008, 03:44:04 PM »
I read that you can use without resistors. It worked then stopped working so i gave up. I took it out and now the power and charge LED doesnt work. What happened?

i had thesame problem
u'll have to replace the ribbon cable from the motherboard to the powerboard



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline platinumc

  • E = MC²
  • *
  • Posts: 317
  • Post quality +0/-0
Re: Trigger Mod doesnt work
« Reply #6 on: January 19, 2008, 05:54:02 PM »
I read that you can use without resistors. It worked then stopped working so i gave up. I took it out and now the power and charge LED doesnt work. What happened?


yeah you can use blue leds w/o resistors, but what i meant was, according to your previous post, that 10 ohm resistors are the right ones you need to use, if you use them


Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Trigger Mod doesnt work
« Reply #7 on: January 19, 2008, 06:30:09 PM »
its safer just to keep a 10ohm in just to jive you peace of mind of not burning you hard earned 0603's? or worse a psp PSC!!! :cry2:
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal