« previous next »
Pages: [1]   Go Down

Author Topic: LED w/ hold button help  (Read 4485 times)

Offline brentbizzle

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
LED w/ hold button help
« on: January 23, 2008, 09:09:01 AM »
Ok, so I'm looking to wire my leds to the hold button. Have a quick voltage question...

What is the voltage of the power source shown in this tutorial?

https://www.acidmods.com/forum/index.php?topic=13942.0

Thanks in advance.
Logged

Offline Dazzerr--

  • Bomb Maker
  • *
  • Posts: 289
  • Post quality +0/-0
Re: LED w/ hold button help
« Reply #1 on: January 23, 2008, 09:13:10 AM »
I think its 3.5v but confirm with someone else.
Logged

Offline brentbizzle

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
Re: LED w/ hold button help
« Reply #2 on: January 23, 2008, 09:59:18 AM »
Thanks a bunch. I search and searched and searched but it was difficult to get solid voltage information... even on acidmods! Unfortunately, all the voltage information is in text form with no pictures. Some posts say all points on the power board are 3.6, others say there are 5.0 and higher voltage spots as well.

Anyway, nice to have this sorted out. Thanks again.
Logged

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: LED w/ hold button help
« Reply #3 on: January 23, 2008, 10:50:46 AM »
Quote from: brentbizzle on January 23, 2008, 09:59:18 AM
Thanks a bunch. I search and searched and searched but it was difficult to get solid voltage information... even on acidmods! Unfortunately, all the voltage information is in text form with no pictures. Some posts say all points on the power board are 3.6, others say there are 5.0 and higher voltage spots as well.

Anyway, nice to have this sorted out. Thanks again.

It's a 5v spot, I've proven it.
Logged

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline brentbizzle

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
Re: LED w/ hold button help
« Reply #4 on: January 23, 2008, 10:55:57 AM »
Can someone please show me a picture of a 3.6v point on the power board? (of a fat psp)

This just keeps getting more and more confusing.
Logged

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: LED w/ hold button help
« Reply #5 on: January 23, 2008, 10:59:51 AM »
Quote from: brentbizzle on January 23, 2008, 10:55:57 AM
Can someone please show me a picture of a 3.6v point on the power board? (of a fat psp)

This just keeps getting more and more confusing.

There is none. The 3.6v on the Powerboard is actually 5v. Just use a resistor and hook it up.
Logged

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline Slimby

  • Acid Modder
  • *
  • Posts: 727
  • Post quality +3/-0
  • Gender: Male
Re: LED w/ hold button help
« Reply #6 on: January 23, 2008, 11:01:59 AM »
*FuFa is Right. Believe his words, and go forth to modding glory!

Slimby
Logged

Slimby for prez.

Offline brentbizzle

  • ½ Pint
  • *
  • Posts: 31
  • Post quality +0/-0
Re: LED w/ hold button help
« Reply #7 on: January 23, 2008, 11:32:12 AM »
Well, I already ordered resisters assuming that I was wiring to a 3.6v point. Can anyone tell me if this point is 3.6?

Logged

Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: LED w/ hold button help
« Reply #8 on: January 23, 2008, 11:44:13 AM »
Quote from: *FuFa on January 23, 2008, 10:59:51 AM
There is none. The 3.6v on the Powerboard is actually 5v. Just use a resistor and hook it up.

now i don't necessarily believe that. ive done 3 led mods using that spot and ive never used a resistor. every time ive measured iv gotten around 3.5. ive used the same spot for the el wire psp. the leds have been fully functional for over a year now.
Logged

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: LED w/ hold button help
« Reply #9 on: January 23, 2008, 11:52:51 AM »
Quote from: edhel on January 23, 2008, 11:48:36 AM
it is a 3.6v point!! fufa just measured it without the power leds on it

Get me a new Powerboard, rich kid.

Or do it yourself.
Logged

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline Tec_

  • EL-Wire King
  • E = MC² Mad Scientist
  • *
  • Posts: 1869
  • Post quality +2/-0
  • Gender: Male
  • EL Wire King
Re: LED w/ hold button help
« Reply #10 on: January 23, 2008, 12:09:17 PM »
Quote from: edhel on January 23, 2008, 11:53:51 AM
naw, we dont want new members to get the wrong end of the stick,:

5.0 v without power/charging leds
3.6v with power/chrging leds

^^^^ that is correct :)

i don't think it is. like i said 3 psp's no power or charge led's and no resistors. they all still work.
Logged

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: LED w/ hold button help
« Reply #11 on: January 23, 2008, 12:14:33 PM »
Quote from: tec_in_the_making on January 23, 2008, 12:09:17 PM
i don't think it is. like i said 3 psp's no power or charge led's and no resistors. they all still work.

Mhh I think edhel, teh uba pr0 moderz, should just wipe out his Multimeter and make a nice picture, so he can prove it.
Logged

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline ryan0

  • I EAT STUFF
  • Millennium Poster
  • *
  • Posts: 1128
  • Post quality +0/-0
  • Gender: Male
  • I LIEK CHEEEEZE
Re: LED w/ hold button help
« Reply #12 on: January 24, 2008, 10:11:30 AM »
Quote from: edhel on January 24, 2008, 10:05:19 AM
no, i dont do psps any more,
its good beaing diverse,way too many psp's on this site,WHIP OUT UR XBOX'S PPL!
Logged
Derp.

Offline bevyii

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
Re: LED w/ hold button help
« Reply #13 on: February 25, 2008, 01:16:59 AM »
bump of old topic.

What i dont understand is.

what do you mean by this?
5.0 v without power/charging leds
3.6v with power/chrging leds

What are power charging LEDs?

Say IF the power supply is 3.6v, and i got resistors for a 5.0v when i install them, would my LED be any less bright? or it just wont turn on?

Say IF the power supply is 5.0v and i got resistors for a 3.6v any chance of shorting the board?

IF in anyway theres risk of shorting the board, id go for the non risk way which is having a supply of 3.6v with 5.0v resistor IF it works. If it doesnt work, i need to get 2 types of resistor to make it work. Could you guys enlighten me on this before i make my order??  :tup:
Logged

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: LED w/ hold button help
« Reply #14 on: February 25, 2008, 01:21:31 AM »
Quote from: bevyii on February 25, 2008, 01:16:59 AM
bump of old topic.

What i dont understand is.

what do you mean by this?
5.0 v without power/charging leds
3.6v with power/chrging leds

What are power charging LEDs?

Say IF the power supply is 3.6v, and i got resistors for a 5.0v when i install them, would my LED be any less bright? or it just wont turn on?

Say IF the power supply is 5.0v and i got resistors for a 3.6v any chance of shorting the board?

IF in anyway theres risk of shorting the board, id go for the non risk way which is having a supply of 3.6v with 5.0v resistor IF it works. If it doesnt work, i need to get 2 types of resistor to make it work. Could you guys enlighten me on this before i make my order??  :tup:

this is why everyone should use one of the 5v points on the mobo much simpler
Logged

PINOY AKO

Offline bevyii

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
Re: LED w/ hold button help
« Reply #15 on: February 25, 2008, 01:58:37 AM »
oh you could do that? So let me confirm something again. I dont want to run up and down my post and his so ima just ask here.

The hold-switch is on the powerboard, so i just scratch the part to disable the hold switch. Then start mounting my led's to the mobo? Confirmed that the mobo gives 5.0v? (i just want to be sure)

Its that simple?

Oh and one more thing, taking off the faceplate, i just yank off the analog controller? i wont be damaging the analog right?
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal